Spain
BCN3D Epsilon W27 at a glance
The BCN3D Epsilon W27 is a 3D printer by BCN3D with a 420 x 300 x 220 mm build volume.
- Build volume
- 420 x 300 x 220 mm
- Enclosure
- Fully enclosed
- Prints well
- PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Connectivity
- SD card, Wi-Fi, Ethernet
Connect the BCN3D Epsilon W27 to SimplyPrint
Does the BCN3D Epsilon W27 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
OctoPrint
Directly, over USB
Not expected to work
Prints from SD card or over Wi-Fi/Ethernet through BCN3D Cloud; no USB port for a computer is documented. Source
No known way to connect it to SimplyPrint
Unfortunately, the BCN3D Epsilon W27 is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
What slicer to use for the BCN3D Epsilon W27
None of the slicers in SimplyPrint's cloud has a ready-made profile for the BCN3D Epsilon W27, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
No profile for the BCN3D Epsilon W27
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the BCN3D Epsilon W27.
Cloud-Based Slicer for BCN3D Epsilon W27
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your BCN3D Epsilon W27 models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your BCN3D Epsilon W27: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
BCN3D Epsilon W27 specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 420 x 300 x 220 mm |
|---|---|
| Bed type | Rectangle |
| Bed size | 420 x 300 mm |
| Max print height | 220 mm |
Printing
| Enclosure | Fully enclosed |
|---|---|
| Max extruder temperature | 300 °C |
| Has heated bed | Yes |
| Max bed temperature | 120 °C |
| Number of nozzles | 2 |
| Toolheads | 2 |
| Direct drive | No |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 2.85 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|---|
| IDEX (independent dual extruders) | Yes |
Connecting
| Connectivity | SD card, Wi-Fi, Ethernet |
|---|---|
| Prints from | SD card |
| Supports serial printing | Unknown |
| Shipped firmware | Marlin |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | BCN3D |
|---|---|
| Printer model name | Epsilon W27 |
| Made by a company from | Spain |
| Launched | October 19, 2020 |
| Still made | Yes |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the BCN3D Epsilon W27 print?
Filament compatibility for the BCN3D Epsilon W27: the materials BCN3D lists for it.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Good | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Printers like the BCN3D Epsilon W27 that work with SimplyPrint
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.
-
Voron Voron Trident
350 x 350 x 250 mmLaunched August 31, 2021Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible -
Vivedino Troodon 2.0
350 x 350 x 320 mmLaunched 2022Connects with: OctoPrintSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible -
QIDI i-fast
330 x 250 x 320 mmLaunched April 2022Connects with: OctoPrintSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible -
Mattershaper Salute
300 x 300 x 350 mmLaunched 2022Connects with: OctoPrintSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filledCompatible
Where to buy the BCN3D Epsilon W27
Official store
Best for USA: BCN3D's global store
Bought straight from BCN3D, from the shop that serves where you are.
Frequently asked questions
Is the BCN3D Epsilon W27 compatible with SimplyPrint?
To our knowledge the BCN3D Epsilon W27 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the BCN3D Epsilon W27?
Cura, PrusaSlicer and OrcaSlicer all work with the BCN3D Epsilon W27, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the BCN3D Epsilon W27?
Yes, but OrcaSlicer has no built-in profile for the BCN3D Epsilon W27 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the BCN3D Epsilon W27 print?
BCN3D lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA) and Carbon-fiber & glass-filled for the Epsilon W27.
What is the BCN3D Epsilon W27's bed size and build volume?
The BCN3D Epsilon W27 has a 420 x 300 mm print bed and prints up to 220 mm tall, a build volume of about 420 x 300 x 220 mm. See the full specifications table above for bed type, temperatures and more.
When did the BCN3D Epsilon W27 come out?
BCN3D launched the Epsilon W27 on October 19, 2020.
Where can I buy the BCN3D Epsilon W27?
From BCN3D's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.