Poland
Zortrax Endureal at a glance
The Zortrax Endureal is a 3D printer by Zortrax with a 400 x 300 x 300 mm build volume.
- Build volume
- 400 x 300 x 300 mm
- Enclosure
- Fully enclosed
- Prints well
- PLA, PETG, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- Built-in camera
- Yes
- Connectivity
- Wi-Fi, Ethernet, USB
Connect the Zortrax Endureal to SimplyPrint
Does the Zortrax Endureal 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
No known way to connect it to SimplyPrint
Unfortunately, the Zortrax Endureal is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
What slicer to use for the Zortrax Endureal
None of the slicers in SimplyPrint's cloud can slice for the Zortrax Endureal that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
No profile for the Zortrax Endureal
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Zortrax Endureal.
No online slicing for the Zortrax Endureal
The app for the Zortrax Endureal
Zortrax's own app is Zortrax inCloud.
Zortrax Endureal specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 400 x 300 x 300 mm |
|---|---|
| Bed type | Rectangle |
| Bed size | 400 x 300 mm |
| Max print height | 300 mm |
Printing
| Enclosure | Fully enclosed |
|---|---|
| Max extruder temperature | 480 °C |
| Has heated bed | Yes |
| Max bed temperature | 220 °C |
| Heated chamber | Up to 200 °C |
| Number of nozzles | 2 |
| Toolheads | 2 |
| Direct drive | No |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|---|
| IDEX (independent dual extruders) | No |
Connecting
| Connectivity | Wi-Fi, Ethernet, USB |
|---|---|
| Built-in camera | Yes |
| Supports serial printing | No |
| Shipped firmware | The maker's own |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Zortrax |
|---|---|
| Printer model name | Endureal |
| Made by a company from | Poland |
| Launched | September 2019 |
| Still made | Yes |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Zortrax Endureal print?
Filament compatibility for the Zortrax Endureal: the materials Zortrax lists for it.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Good | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
| High-temperature (PEI, PEEK, PEKK) | Great | On the maker's list of materials for this printer. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Printers like the Zortrax Endureal that work with SimplyPrint
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.
-
Voron Voron Trident
350 x 350 x 250 mmLaunched August 31, 2021Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible -
Vision Miner 22 IDEX
350 x 350 x 450 mmLaunched 2021Connects with: Duet (RepRapFirmware)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)Compatible -
Creality K1 Max
300 x 300 x 300 mmLaunched July 14, 2023Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible -
Bambu Lab H2S Combo
340 x 320 x 340 mmLaunched August 26, 2025Connects with: SimplyPrint ClientSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)Verified by SimplyPrint
Where to buy the Zortrax Endureal
Official store
Best for USA: Zortrax's global store
Bought straight from Zortrax, from the shop that serves where you are.
Frequently asked questions
Is the Zortrax Endureal compatible with SimplyPrint?
To our knowledge the Zortrax Endureal is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the Zortrax Endureal?
None of the slicers in SimplyPrint's cloud can slice for the Zortrax Endureal that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
What filament can the Zortrax Endureal print?
Zortrax lists ABS & ASA, Polycarbonate (PC), High-temperature (PEI, PEEK, PEKK) and Carbon-fiber & glass-filled for the Endureal.
What is the Zortrax Endureal's bed size and build volume?
The Zortrax Endureal has a 400 x 300 mm print bed and prints up to 300 mm tall, a build volume of about 400 x 300 x 300 mm. See the full specifications table above for bed type, temperatures and more.
When did the Zortrax Endureal come out?
Zortrax launched the Endureal in September 2019.
Where can I buy the Zortrax Endureal?
From Zortrax's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.