Tiertime UP600 HS: specs, SimplyPrint compatibility and setup

By Tiertime, China Launched 2026

Tiertime UP600 HS image

Does it work with SimplyPrint?

Not confirmed yet - help us find out We can't tell

We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

Find out if it works

Tiertime UP600 HS at a glance

The UP600 HS is Tiertime's large enclosed printer with a 500 x 400 x 600 mm build volume, HEPA and carbon filtering and a 299 °C extruder. It is for workshops that need big, closed engineering-material parts and work in Tiertime's software.

Build volume
500 x 400 x 600 mm
Enclosure
Fully enclosed
Max print speed
200 mm/s
Prints well
PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
Connectivity
USB, Wi-Fi, Ethernet
All specifications

Connect the Tiertime UP600 HS to SimplyPrint

Does the Tiertime UP600 HS 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint

    Not confirmed yet - help us find out

    Help us confirm Be one of the first to confirm it
  • OctoPrint

    OctoPrint

    Directly, over USB

    Not confirmed yet - help us find out

    Newer UP firmware with a Linux touchscreen and G-code import (OrcaSlicer); no source on serial printing or OctoPrint. Source

    Help us confirm Be one of the first to confirm it
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not compatible

    Closed Tiertime firmware; no Klipper. Source

What slicer to use for the Tiertime UP600 HS

None of the slicers in SimplyPrint's cloud can slice for the Tiertime UP600 HS that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

No profile for the Tiertime UP600 HS

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Tiertime UP600 HS.

No online slicing for the Tiertime UP600 HS

Tiertime UP600 HS specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 500 x 400 x 600 mm
Bed type Square
Bed size 500 x 400 mm
Max print height 600 mm

Printing

Enclosure Fully enclosed
Max print speed 200 mm/s
Max extruder temperature 299 °C
Has heated bed Yes
Max bed temperature 100 °C
Number of nozzles 1
Toolheads 1
Direct drive No
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Multi-material

Toolchanger or hotend changer No
IDEX (independent dual extruders) No

Connecting

Connectivity USB, Wi-Fi, Ethernet
Prints from USB stick
Supports serial printing Unknown
Shipped firmware The maker's own

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Tiertime
Printer model name UP600 HS
Made by a company from China
Launched 2026

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Tiertime UP600 HS print?

Filament compatibility for the Tiertime UP600 HS: the materials Tiertime lists for it.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great On the maker's list of materials for this printer.
TPU & flexibles Great On the maker's list of materials for this printer.
ABS & ASA Great On the maker's list of materials for this printer.
Nylon (PA) Great On the maker's list of materials for this printer.
Polycarbonate (PC) Great On the maker's list of materials for this printer.
Carbon-fiber & glass-filled Great On the maker's list of materials for this printer.
High-temperature (PEI, PEEK, PEKK) Great On the maker's list of materials for this printer.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

When to choose the Tiertime UP600 HS

Choose the UP600 HS when a closed machine with a tall 600 mm build height and filtered air matters more than speed: it prints at up to 200 mm/s. Its 299 °C extruder covers ABS, ASA, PETG, TPU, PC, nylon and composites. For a heated chamber and a 400 °C extruder, the UP400 Pro is the higher-spec Tiertime; for large builds at lower cost see the open-frame Tronxy VEHO printers.

Pros

  • 500 x 400 x 600 mm build volume in a fully enclosed machine (Tiertime).
  • HEPA and activated-carbon filtration, and printing pauses when the front door opens (Tiertime).
  • Handles ABS, ASA, PETG, TPU, PC, PC-ABS, nylon, PET-CF, PP-GF and PPS filaments (Tiertime).
  • Wi-Fi, Ethernet, USB and USB stick, a 7-inch touchscreen and a Tiertime Print Queue for several users (Tiertime).
  • Out-of-filament detection, automatic levelling and pause to change filament (Tiertime).

Cons

  • Print speed is limited to 200 mm/s and 5,000 mm/s² acceleration, slow for a printer this size.
  • Extruder tops out at 299 °C with a single extruder, which limits the hottest materials.
  • No confirmed SimplyPrint connection method in our facts: Klipper is incompatible and OctoPrint is unknown.
  • No camera in our facts, and no independent hands-on review found.

Who it suits

  • Schools Can work

    Enclosed and filtered, but very large and costly for a classroom, and we cannot confirm a SimplyPrint connection for approval queues.

  • Hobbyists Not a good fit

    Big, expensive and slow for what most hobbyists print.

  • Businesses Good fit

    Large closed engineering-plastic parts, with Tiertime's own queue rather than SimplyPrint.

  • Print farms Not a good fit

    200 mm/s, no confirmed SimplyPrint connection and no camera or plate-swap kit in our facts.

Written from the maker's information and independent reviews. Read more by the manufacturer

Printers like the Tiertime UP600 HS that work with SimplyPrint

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.

  • Sovol SV08 Max (Heat Chamber) 3D printer
    Sovol SV08 Max (Heat Chamber)
    500 x 500 x 450 mm
    Launched May 2025
    Connects with: Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • MINGDA Raptor 450 3D printer
    MINGDA Raptor 450
    450 x 450 x 500 mm
    Launched 2026
    Connects with: Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
    Expected to work
  • Tronxy VEHO 500A 3D printer
    Tronxy VEHO 500A
    500 x 500 x 500 mm
    Launched February 2025
    Connects with: Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
    Compatible
  • Kentstrapper Bold 755 3D printer
    Kentstrapper Bold 755
    700 x 500 x 500 mm
    Connects with: SimplyPrint built in
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
    Compatible
Compare 3D printers that work with SimplyPrint All Tiertime printers

Frequently asked questions

Is the Tiertime UP600 HS compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Tiertime UP600 HS, our compatibility check tells you in a few questions how it could connect.

What slicer should I use for the Tiertime UP600 HS?

None of the slicers in SimplyPrint's cloud can slice for the Tiertime UP600 HS that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

What filament can the Tiertime UP600 HS print?

Tiertime lists ABS & ASA, PETG, TPU & flexibles, Polycarbonate (PC), Nylon (PA), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the UP600 HS.

What is the Tiertime UP600 HS's bed size and build volume?

The Tiertime UP600 HS has a 500 x 400 mm print bed and prints up to 600 mm tall, a build volume of about 500 x 400 x 600 mm. See the full specifications table above for bed type, temperatures and more.

When did the Tiertime UP600 HS come out?

Tiertime launched the UP600 HS in 2026.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.