China
Tiertime UP300 at a glance
The Tiertime UP300 is a 3D printer by Tiertime with a 205 x 255 x 225 mm build volume.
- Build volume
- 205 x 255 x 225 mm
- Enclosure
- Fully enclosed
- Prints well
- PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
- Connectivity
- USB, Wi-Fi, Ethernet
Connect the Tiertime UP300 to SimplyPrint
Does the Tiertime UP300 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
OctoPrint
Directly, over USB
Not expected to work
UP printers take Tiertime's own 'UP machine code' over USB from UP Studio, not G-code over serial; a community tool converts G-code to it, not a live serial link. Source
No known way to connect it to SimplyPrint
Unfortunately, the Tiertime UP300 is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
What slicer to use for the Tiertime UP300
None of the slicers in SimplyPrint's cloud can slice for the Tiertime UP300 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
No profile for the Tiertime UP300
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Tiertime UP300.
No online slicing for the Tiertime UP300
Tiertime UP300 specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 205 x 255 x 225 mm |
|---|---|
| Bed type | Square |
| Bed size | 205 x 255 mm |
| Max print height | 225 mm |
Printing
| Enclosure | Fully enclosed |
|---|---|
| Max extruder temperature | 299 °C |
| Has heated bed | Yes |
| Max bed temperature | 100 °C |
| Number of nozzles | 1 |
| Toolheads | 1 |
| Direct drive | Yes |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|---|
| IDEX (independent dual extruders) | No |
Connecting
| Connectivity | USB, Wi-Fi, Ethernet |
|---|---|
| Prints from | USB stick |
| Supports serial printing | Unknown |
| Shipped firmware | The maker's own |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Tiertime |
|---|---|
| Printer model name | UP300 |
| Made by a company from | China |
| Launched | 2018 |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Tiertime UP300 print?
Filament compatibility for the Tiertime UP300: the materials Tiertime lists for it.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Good | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Good | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Printers like the Tiertime UP300 that work with SimplyPrint
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.
-
Bambu Lab P1S
256 x 256 x 256 mmLaunched July 13, 2023Connects with: SimplyPrint ClientSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Verified by SimplyPrint -
Bambu Lab P2S Combo
256 x 256 x 256 mmLaunched October 14, 2025Connects with: SimplyPrint ClientSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Verified by SimplyPrint -
Creality K1C
220 x 220 x 250 mmLaunched January 25, 2024Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible -
Creality K1
220 x 220 x 250 mmLaunched April 2023Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible
Where to buy the Tiertime UP300
Official store
Best for USA: Tiertime's global store
Bought straight from Tiertime, from the shop that serves where you are.
Frequently asked questions
Is the Tiertime UP300 compatible with SimplyPrint?
To our knowledge the Tiertime UP300 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the Tiertime UP300?
None of the slicers in SimplyPrint's cloud can slice for the Tiertime UP300 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
What filament can the Tiertime UP300 print?
Tiertime lists PLA, ABS & ASA and TPU & flexibles for the UP300.
What is the Tiertime UP300's bed size and build volume?
The Tiertime UP300 has a 205 x 255 mm print bed and prints up to 225 mm tall, a build volume of about 205 x 255 x 225 mm. See the full specifications table above for bed type, temperatures and more.
When did the Tiertime UP300 come out?
Tiertime launched the UP300 in 2018.
Where can I buy the Tiertime UP300?
From Tiertime's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.