Tiertime UP mini 3: specs, SimplyPrint compatibility and setup

By Tiertime, China Launched 2022

Tiertime UP mini 3 image

Does it work with SimplyPrint?

Not expected to work Most likely not

We don't expect it to work, but we could be wrong.

Find out if it works Buy from Tiertime

Tiertime UP mini 3 at a glance

The Tiertime UP mini 3 is a 3D printer by Tiertime with a 200 x 200 x 200 mm build volume.

Build volume
200 x 200 x 200 mm
Enclosure
Fully enclosed
Prints well
PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
Connectivity
USB, Wi-Fi
All specifications

Connect the Tiertime UP mini 3 to SimplyPrint

Does the Tiertime UP mini 3 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint

    Not expected to work

    Find out how to check
  • OctoPrint

    OctoPrint

    Directly, over USB

    Not expected to work

    UP printers take Tiertime's own 'UP machine code' over USB from UP Studio, not G-code over serial; a community tool converts G-code to it, not a live serial link. Source

    Find out how to check
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not compatible

    Closed Tiertime firmware; no Klipper. Source

No known way to connect it to SimplyPrint

Unfortunately, the Tiertime UP mini 3 is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.

How we determine compatibility

We consider a printer compatible if it works with one or more of the following:

  • SimplyPrint custom integration for this specific model
  • OctoPrint support (requires the printer to support serial printing)
  • Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)

OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.

Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.

See printers that work View Compatible Printers

What slicer to use for the Tiertime UP mini 3

None of the slicers in SimplyPrint's cloud can slice for the Tiertime UP mini 3 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

No profile for the Tiertime UP mini 3

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Tiertime UP mini 3.

No online slicing for the Tiertime UP mini 3

Tiertime UP mini 3 specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 200 x 200 x 200 mm
Bed type Square
Bed size 200 x 200 mm
Max print height 200 mm

Printing

Enclosure Fully enclosed
Max extruder temperature 300 °C
Has heated bed Yes
Max bed temperature 100 °C
Number of nozzles 1
Toolheads 1
Direct drive No
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Multi-material

Toolchanger or hotend changer No
IDEX (independent dual extruders) No

Connecting

Connectivity USB, Wi-Fi
Supports serial printing Unknown
Shipped firmware The maker's own

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Tiertime
Printer model name UP mini 3
Made by a company from China
Launched 2022

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Tiertime UP mini 3 print?

Filament compatibility for the Tiertime UP mini 3: the materials Tiertime lists for it.

Filament Suitability Notes
PLA Great On the maker's list of materials for this printer.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles Great On the maker's list of materials for this printer.
ABS & ASA Great On the maker's list of materials for this printer.
Nylon (PA) Good Doable with care - dry the filament thoroughly, and an enclosure helps a lot.
Polycarbonate (PC) Good In range for PC. Dry the filament, print slowly, and use an enclosure for the best results.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Printers like the Tiertime UP mini 3 that work with SimplyPrint

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.

  • Creality K1C 3D printer
    Creality K1C
    220 x 220 x 250 mm
    Launched January 25, 2024
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • Creality K1 3D printer
    Creality K1
    220 x 220 x 250 mm
    Launched April 2023
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • Flashforge Adventurer 5M Pro 3D printer
    Flashforge Adventurer 5M Pro
    220 x 220 x 220 mm
    Launched September 5, 2023
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • Snapmaker J1s 3D printer
    Snapmaker J1s
    300 x 200 x 200 mm
    Launched June 2023
    Connects with: OctoPrint
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
Compare 3D printers that work with SimplyPrint All Tiertime printers

Where to buy the Tiertime UP mini 3

Tiertime Official store

Best for USA: Tiertime's global store

Bought straight from Tiertime, from the shop that serves where you are.

Buy from Tiertime

Frequently asked questions

Is the Tiertime UP mini 3 compatible with SimplyPrint?

To our knowledge the Tiertime UP mini 3 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

What slicer should I use for the Tiertime UP mini 3?

None of the slicers in SimplyPrint's cloud can slice for the Tiertime UP mini 3 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

What filament can the Tiertime UP mini 3 print?

Tiertime lists PLA, ABS & ASA and TPU & flexibles for the UP mini 3.

What is the Tiertime UP mini 3's bed size and build volume?

The Tiertime UP mini 3 has a 200 x 200 mm print bed and prints up to 200 mm tall, a build volume of about 200 x 200 x 200 mm. See the full specifications table above for bed type, temperatures and more.

When did the Tiertime UP mini 3 come out?

Tiertime launched the UP mini 3 in 2022.

Where can I buy the Tiertime UP mini 3?

From Tiertime's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.