Sindoh 3DWOX 1: specs, SimplyPrint compatibility and setup

By Sindoh, South Korea Launched May 2018

Sindoh 3DWOX 1 image

Does it work with SimplyPrint?

Not expected to work Most likely not

We don't expect it to work, but we could be wrong.

Find out if it works

Sindoh 3DWOX 1 at a glance

The Sindoh 3DWOX 1 is a 3D printer by Sindoh with a 210 x 200 x 195 mm build volume.

Build volume
210 x 200 x 195 mm
Enclosure
Fully enclosed
Prints well
PLA, PETG, ABS & ASA, Nylon (PA)
Built-in camera
Yes
Connectivity
USB, Ethernet, Wi-Fi
All specifications

Connect the Sindoh 3DWOX 1 to SimplyPrint

Does the Sindoh 3DWOX 1 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint

    Not expected to work

    Find out how to check
  • OctoPrint

    OctoPrint

    Directly, over USB

    Not expected to work

    Closed Sindoh firmware driven by 3DWOX Desktop/cloud; an OctoPrint forum thread finds no serial port and no confirmed working setup. Source

    Find out how to check
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not compatible

    Ships Sindoh's closed firmware; no Klipper. Source

No known way to connect it to SimplyPrint

Unfortunately, the Sindoh 3DWOX 1 is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.

How we determine compatibility

We consider a printer compatible if it works with one or more of the following:

  • SimplyPrint custom integration for this specific model
  • OctoPrint support (requires the printer to support serial printing)
  • Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)

OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.

Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.

See printers that work View Compatible Printers

What slicer to use for the Sindoh 3DWOX 1

None of the slicers in SimplyPrint's cloud can slice for the Sindoh 3DWOX 1 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

No profile for the Sindoh 3DWOX 1

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Sindoh 3DWOX 1.

No online slicing for the Sindoh 3DWOX 1

Sindoh 3DWOX 1 specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 210 x 200 x 195 mm
Bed type Square
Bed size 210 x 200 mm
Max print height 195 mm

Printing

Enclosure Fully enclosed
Max extruder temperature 250 °C
Has heated bed Yes
Max bed temperature 110 °C
Number of nozzles 1
Toolheads 1
Direct drive No
Probing tool / Auto Bed Leveling No
Filament width 1.75 mm

Multi-material

Toolchanger or hotend changer No

Connecting

Connectivity USB, Ethernet, Wi-Fi
Built-in camera Yes
Supports serial printing Unknown
Shipped firmware The maker's own

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Sindoh
Printer model name 3DWOX 1
Made by a company from South Korea
Launched May 2018

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Sindoh 3DWOX 1 print?

Filament compatibility for the Sindoh 3DWOX 1: the materials Sindoh lists for it.

Filament Suitability Notes
PLA Great On the maker's list of materials for this printer.
PETG Great On the maker's list of materials for this printer.
TPU & flexibles With care Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA Great On the maker's list of materials for this printer.
Nylon (PA) Good Doable with care - dry the filament thoroughly, and an enclosure helps a lot.
Polycarbonate (PC) Not ideal Not recommended - PC needs very high hotend temps and an enclosed chamber.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Printers like the Sindoh 3DWOX 1 that work with SimplyPrint

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.

  • Creality K1C 3D printer
    Creality K1C
    220 x 220 x 250 mm
    Launched January 25, 2024
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA)
    Compatible
  • Creality K1 3D printer
    Creality K1
    220 x 220 x 250 mm
    Launched April 2023
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA)
    Compatible
  • Flashforge Adventurer 5M Pro 3D printer
    Flashforge Adventurer 5M Pro
    220 x 220 x 220 mm
    Launched September 5, 2023
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA)
    Compatible
  • Snapmaker J1s 3D printer
    Snapmaker J1s
    300 x 200 x 200 mm
    Launched June 2023
    Connects with: OctoPrint
    Similar build volume · Also prints ABS & ASA, Nylon (PA)
    Compatible
Compare 3D printers that work with SimplyPrint All Sindoh printers

Frequently asked questions

Is the Sindoh 3DWOX 1 compatible with SimplyPrint?

To our knowledge the Sindoh 3DWOX 1 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

What slicer should I use for the Sindoh 3DWOX 1?

None of the slicers in SimplyPrint's cloud can slice for the Sindoh 3DWOX 1 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

What filament can the Sindoh 3DWOX 1 print?

Sindoh lists PLA, ABS & ASA and PETG for the 3DWOX 1.

What is the Sindoh 3DWOX 1's bed size and build volume?

The Sindoh 3DWOX 1 has a 210 x 200 mm print bed and prints up to 195 mm tall, a build volume of about 210 x 200 x 195 mm. See the full specifications table above for bed type, temperatures and more.

When did the Sindoh 3DWOX 1 come out?

Sindoh launched the 3DWOX 1 in May 2018.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.