China
Raise3D E2 at a glance
The Raise3D E2 is a 3D printer by Raise3D with a 330 x 240 x 240 mm build volume.
- Build volume
- 330 x 240 x 240 mm
- Enclosure
- Fully enclosed
- Prints well
- PLA, PETG, ABS & ASA, Nylon (PA), Polycarbonate (PC)
- Built-in camera
- Yes
- Connectivity
- Wi-Fi, Ethernet, USB
Connect the Raise3D E2 to SimplyPrint
Does the Raise3D E2 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
SimplyPrint
Not compatible
-
Klipper (Moonraker)
Not compatible
-
OctoPrint
Directly, over USB
Not compatible
No known way to connect it to SimplyPrint
Unfortunately, the Raise3D E2 is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
What slicer to use for the Raise3D E2
None of the slicers in SimplyPrint's cloud has a ready-made profile for the Raise3D E2, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
Raise3D's own slicer
-
ideaMakerMade by Raise3D, not in the SimplyPrint cloud
No profile for the Raise3D E2
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Raise3D E2.
Cloud-Based Slicer for Raise3D E2
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Raise3D E2 models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Raise3D E2: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
Raise3D E2 specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 330 x 240 x 240 mm |
|---|---|
| Bed type | Rectangle |
| Bed size | 330 x 240 mm |
| Max print height | 240 mm |
Printing
| Enclosure | Fully enclosed |
|---|---|
| Max extruder temperature | 300 °C |
| Has heated bed | Yes |
| Max bed temperature | 110 °C |
| Number of nozzles | 1 |
| Toolheads | 2 |
| Direct drive | No |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|---|
| IDEX (independent dual extruders) | Yes |
Connecting
| Connectivity | Wi-Fi, Ethernet, USB |
|---|---|
| Built-in camera | Yes |
| Supports serial printing | Yes |
| Shipped firmware | RepRapFirmware (Duet) |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Raise3D |
|---|---|
| Printer model name | E2 |
| Made by a company from | China |
| Launched | November 2019 |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Raise3D E2 print?
Filament compatibility for the Raise3D E2: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | Enclosed, with a hot enough hotend and bed: ABS and ASA print well. |
| Nylon (PA) | Good | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Good | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Printers like the Raise3D E2 that work with SimplyPrint
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.
-
FrankenVoron Tridex
225 x 250 x 250 mmLaunched December 2021Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Expected to work -
SnakeOil-XY SnakeOil-XY
250 x 240 x 230 mmLaunched June 2021Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible -
Bambu Lab P1S
256 x 256 x 256 mmLaunched July 13, 2023Connects with: SimplyPrint ClientSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Verified by SimplyPrint -
Bambu Lab P2S Combo
256 x 256 x 256 mmLaunched October 14, 2025Connects with: SimplyPrint ClientSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Verified by SimplyPrint
Where to buy the Raise3D E2
Official store
Best for USA: Raise3D's store for the US
Bought straight from Raise3D, from the shop that serves where you are.
Frequently asked questions
Is the Raise3D E2 compatible with SimplyPrint?
To our knowledge the Raise3D E2 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the Raise3D E2?
Cura, PrusaSlicer and OrcaSlicer all work with the Raise3D E2, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the Raise3D E2?
Yes, but OrcaSlicer has no built-in profile for the Raise3D E2 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Raise3D E2 print?
Based on its specs (hotend up to 300C, heated bed up to 110C), the Raise3D E2 handles PLA, PETG, ABS & ASA, or Nylon (PA) well. See the full filament guide above for ABS, nylon, PC and composites.
What is the Raise3D E2's bed size and build volume?
The Raise3D E2 has a 330 x 240 mm print bed and prints up to 240 mm tall, a build volume of about 330 x 240 x 240 mm. See the full specifications table above for bed type, temperatures and more.
When did the Raise3D E2 come out?
Raise3D launched the E2 in November 2019.
Where can I buy the Raise3D E2?
From Raise3D's own store, which has shops for the US. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.