Intamsys FUNMAT PRO 610HT: specs, SimplyPrint compatibility and setup

By Intamsys, China Launched February 2019

Intamsys FUNMAT PRO 610HT image

Does it work with SimplyPrint?

Not expected to work Most likely not

We don't expect it to work, but we could be wrong.

Find out if it works Buy from Intamsys

Intamsys FUNMAT PRO 610HT at a glance

The Intamsys FUNMAT PRO 610HT is a 3D printer by Intamsys with a 610 x 508 x 508 mm build volume.

Build volume
610 x 508 x 508 mm
Enclosure
Fully enclosed
Prints well
PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
All specifications

Connect the Intamsys FUNMAT PRO 610HT to SimplyPrint

Does the Intamsys FUNMAT PRO 610HT 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint

    Not expected to work

    Find out how to check
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not expected to work

    1.4-tonne industrial machine with servo drives and a safety PLC, run through INTAMSUITE; no sign of Klipper or Moonraker. Source

    Find out how to check
  • OctoPrint

    OctoPrint

    Directly, over USB

    Not expected to work

    Industrial controller and workflow; no USB serial printing documented. Source

    Find out how to check

No known way to connect it to SimplyPrint

Unfortunately, the Intamsys FUNMAT PRO 610HT is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.

How we determine compatibility

We consider a printer compatible if it works with one or more of the following:

  • SimplyPrint custom integration for this specific model
  • OctoPrint support (requires the printer to support serial printing)
  • Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)

OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.

Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.

See printers that work View Compatible Printers

What slicer to use for the Intamsys FUNMAT PRO 610HT

None of the slicers in SimplyPrint's cloud can slice for the Intamsys FUNMAT PRO 610HT that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

No profile for the Intamsys FUNMAT PRO 610HT

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Intamsys FUNMAT PRO 610HT.

No online slicing for the Intamsys FUNMAT PRO 610HT

Intamsys FUNMAT PRO 610HT specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 610 x 508 x 508 mm
Bed type Square
Bed size 610 x 508 mm
Max print height 508 mm

Printing

Enclosure Fully enclosed
Max extruder temperature 500 °C
Has heated bed Yes
Max bed temperature 100 °C
Heated chamber Up to 300 °C
Number of nozzles 2
Toolheads 2
Direct drive Yes
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Multi-material

Toolchanger or hotend changer No

Connecting

Supports serial printing Unknown
Shipped firmware Unknown

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Intamsys
Printer model name FUNMAT PRO 610HT
Made by a company from China
Launched February 2019
Still made Yes

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Intamsys FUNMAT PRO 610HT print?

Filament compatibility for the Intamsys FUNMAT PRO 610HT: the materials Intamsys lists for it.

Filament Suitability Notes
PLA Great On the maker's list of materials for this printer.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles Great The direct-drive extruder feeds flexible filament well. Print slowly for clean results.
ABS & ASA Great On the maker's list of materials for this printer.
Nylon (PA) Great On the maker's list of materials for this printer.
Polycarbonate (PC) Great On the maker's list of materials for this printer.
Carbon-fiber & glass-filled Great On the maker's list of materials for this printer.
High-temperature (PEI, PEEK, PEKK) Great On the maker's list of materials for this printer.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Printers like the Intamsys FUNMAT PRO 610HT that work with SimplyPrint

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.

  • Sovol SV08 Max (Heat Chamber) 3D printer
    Sovol SV08 Max (Heat Chamber)
    500 x 500 x 450 mm
    Launched May 2025
    Connects with: Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • Kentstrapper Bold 755 3D printer
    Kentstrapper Bold 755
    700 x 500 x 500 mm
    Connects with: SimplyPrint built in
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
    Compatible
  • WASP 4070 FX 3D printer
    WASP 4070 FX
    400 x 400 x 700 mm
    Connects with: OctoPrint
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • WASP 4070 ZX 3D printer
    WASP 4070 ZX
    400 x 400 x 700 mm
    Connects with: OctoPrint
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
Compare 3D printers that work with SimplyPrint All Intamsys printers

Where to buy the Intamsys FUNMAT PRO 610HT

Intamsys Official store

Best for USA: Intamsys's global store

Bought straight from Intamsys, from the shop that serves where you are.

Buy from Intamsys

Frequently asked questions

Is the Intamsys FUNMAT PRO 610HT compatible with SimplyPrint?

To our knowledge the Intamsys FUNMAT PRO 610HT is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

What slicer should I use for the Intamsys FUNMAT PRO 610HT?

None of the slicers in SimplyPrint's cloud can slice for the Intamsys FUNMAT PRO 610HT that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

What filament can the Intamsys FUNMAT PRO 610HT print?

Intamsys lists PLA, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the FUNMAT PRO 610HT.

What is the Intamsys FUNMAT PRO 610HT's bed size and build volume?

The Intamsys FUNMAT PRO 610HT has a 610 x 508 mm print bed and prints up to 508 mm tall, a build volume of about 610 x 508 x 508 mm. See the full specifications table above for bed type, temperatures and more.

When did the Intamsys FUNMAT PRO 610HT come out?

Intamsys launched the FUNMAT PRO 610HT in February 2019.

Where can I buy the Intamsys FUNMAT PRO 610HT?

From Intamsys's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.