Table of Contents
Learn all about the specifications of the IFactory3D One Pro 3D printer, whether it's compatible with OctoPrint, Mainsail, Fluidd and SimplyPrint, and how to set each of them up.
Printer Compatibility for IFactory3D One Pro
Does the IFactory3D One Pro 3D printer work with OctoPrint, Mainsail, Fluidd and SimplyPrint?
Figuring out if your particular printer works with OctoPrint, Mainsail, Fluidd or SimplyPrint can be a challenging task - especially if you're new to 3D printing - as there are thousands of printers out there.
We're here to make it a little easier for you, by answering the question; is the IFactory3D One Pro compatible with OctoPrint, Mainsail, Fluidd and SimplyPrint?
Did we make a mistake? Is any of this data wrong? Let us know!
No Current Compatibility
Unfortunately, the IFactory3D One Pro is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
What Slicer to Use for IFactory3D One Pro
Find the best slicing software for your IFactory3D One Pro 3D printer.
Compatible Slicers for IFactory3D One Pro
At SimplyPrint we support the following 6 slicers. But, that does not mean that no other slicers are compatible with this the IFactory3D One Pro. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the IFactory3D One Pro.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by IFactory3D—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for IFactory3D One Pro
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your IFactory3D One Pro. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the IFactory3D One Pro print?
A guide to the materials the IFactory3D One Pro can handle, based on its hotend specs.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | With care | Marginal - PETG prefers a hotter bed (~70-80C) than this printer reaches. |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
IFactory3D One Pro Printer Specifications: Bed Type, Size, Print Height and More
Discover the key features of the IFactory3D One Pro 3D printer model. From its bed type to its size, print height, and more, we provide detailed specifications to help you understand the printer's capabilities.
| Specification | Details |
|---|---|
| Printer model name | One Pro |
| Printer manufacturer / brand | IFactory3D |
| Bed type | Rectangle |
| Bed size | 620 x 540 mm |
| Max print height | 380mm |
| Has heated bed | No |
| Max extruder temperature | 285° |
| Filament width | 1.75mm |
| Number of nozzles | 1 |
| Probing tool / Auto Bed Leveling | No |
| Direct drive | Yes |
| Supports serial printing | Yes |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Did we make a mistake? Is any of this data wrong? Let us know!
Frequently asked questions
Is the IFactory3D One Pro compatible with SimplyPrint?
To our knowledge the IFactory3D One Pro is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the IFactory3D One Pro?
Cura, PrusaSlicer and OrcaSlicer all work with the IFactory3D One Pro, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the IFactory3D One Pro print?
Based on its specs (hotend up to 285C, no heated bed), the IFactory3D One Pro handles PLA or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.
What is the IFactory3D One Pro's build volume?
The IFactory3D One Pro has a build volume of about 620 x 540 x 380 mm. See the full specifications table above for bed type, temperatures and more.
Final words
We've reached the end of our IFactory3D One Pro information guide. We devote substantial time to research and gather data on as many 3D printers as possible, understanding the challenge of finding comprehensive, reliable information all in one place. Our primary focus is providing insights into the compatibility of specific printers with the most popular 3D printing clients. We hope this guide has helped answer your questions!