Co Print Quadro at a glance
The Co Print Quadro is a 3D printer by Co Print with a 300 x 300 x 300 mm build volume.
- Build volume
- 300 x 300 x 300 mm
- Max print speed
- 600 mm/s
- Motion system
- Bed slinger
- Prints well
- PLA, PETG
- Built-in camera
- Yes
Connect the Co Print Quadro to SimplyPrint
Does the Co Print Quadro 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
Klipper (Moonraker)
Not confirmed yet - help us find out
Co Print has not said what firmware Quadro runs. Source
Help us confirm Be one of the first to confirm it -
OctoPrint
Directly, over USB
Not confirmed yet - help us find out
Not shipping; connectivity not published. Source
Help us confirm Be one of the first to confirm it
What slicer to use for the Co Print Quadro
None of the slicers in SimplyPrint's cloud can slice for the Co Print Quadro that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
No profile for the Co Print Quadro
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Co Print Quadro.
No online slicing for the Co Print Quadro
Co Print Quadro specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 300 x 300 x 300 mm |
|---|---|
| Bed type | Square |
| Bed size | 300 x 300 mm |
| Max print height | 300 mm |
Printing
| Motion system | Bed slinger |
|---|---|
| Max print speed | 600 mm/s |
| Max extruder temperature | 300 °C |
| Has heated bed | Yes |
| Max bed temperature | 100 °C |
| Number of nozzles | 4 |
| Toolheads | 4 |
| Direct drive | No |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|
Connecting
| Built-in camera | Yes |
|---|---|
| Supports serial printing | Unknown |
| Shipped firmware | Unknown |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Co Print |
|---|---|
| Printer model name | Quadro |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Co Print Quadro print?
Filament compatibility for the Co Print Quadro: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Printers like the Co Print Quadro that work with SimplyPrint
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.
-
Creality K1 Max
300 x 300 x 300 mmLaunched July 14, 2023Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volumeCompatible -
Snapmaker U1
270 x 270 x 270 mmLaunched 2025Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volumeCompatible -
Anycubic Kobra X
260 x 260 x 260 mmLaunched March 2026Connects with: SimplyPrint ClientSimilar build volumeCompatible -
Bambu Lab H2S Combo
340 x 320 x 340 mmLaunched August 26, 2025Connects with: SimplyPrint ClientSimilar build volumeVerified by SimplyPrint
Frequently asked questions
Is the Co Print Quadro compatible with SimplyPrint?
We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Co Print Quadro, our compatibility check tells you in a few questions how it could connect.
What slicer should I use for the Co Print Quadro?
None of the slicers in SimplyPrint's cloud can slice for the Co Print Quadro that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
What filament can the Co Print Quadro print?
Based on its specs (hotend up to 300C, heated bed up to 100C), the Co Print Quadro handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.
What is the Co Print Quadro's bed size and build volume?
The Co Print Quadro has a 300 x 300 mm print bed and prints up to 300 mm tall, a build volume of about 300 x 300 x 300 mm. See the full specifications table above for bed type, temperatures and more.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.