CEL Robox RBX01: specs, SimplyPrint compatibility and setup

By CEL, United Kingdom Launched November 2014

Does it work with SimplyPrint?

Not expected to work Most likely not

We don't expect it to work, but we could be wrong.

Find out if it works

CEL Robox RBX01 at a glance

The CEL Robox RBX01 is a 3D printer by CEL with a 210 x 150 x 100 mm build volume.

Build volume
210 x 150 x 100 mm
Enclosure
Fully enclosed
Motion system
Bed slinger
Prints well
PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
All specifications

Connect the CEL Robox RBX01 to SimplyPrint

Does the CEL Robox RBX01 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint

    Not expected to work

    Find out how to check
  • OctoPrint

    OctoPrint

    Directly, over USB

    Not expected to work

    Driven over USB by CEL's AutoMaker software (or CEL's Root box), not by generic G-code senders. Source

    Find out how to check
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not compatible

    Runs CEL's own firmware ('We made our own user interface and firmware'). Source

No known way to connect it to SimplyPrint

Unfortunately, the CEL Robox RBX01 is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.

How we determine compatibility

We consider a printer compatible if it works with one or more of the following:

  • SimplyPrint custom integration for this specific model
  • OctoPrint support (requires the printer to support serial printing)
  • Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)

OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.

Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.

See printers that work View Compatible Printers

What slicer to use for the CEL Robox RBX01

None of the slicers in SimplyPrint's cloud can slice for the CEL Robox RBX01 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

No profile for the CEL Robox RBX01

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the CEL Robox RBX01.

No online slicing for the CEL Robox RBX01

CEL Robox RBX01 specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 210 x 150 x 100 mm
Bed type Rectangle
Bed size 210 x 150 mm
Max print height 100 mm

Printing

Enclosure Fully enclosed
Motion system Bed slinger
Max extruder temperature 280 °C
Has heated bed Yes
Max bed temperature 150 °C
Number of nozzles 1
Direct drive No
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Connecting

Supports serial printing Unknown
Shipped firmware The maker's own

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand CEL
Printer model name Robox RBX01
Made by a company from United Kingdom
Launched November 2014

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the CEL Robox RBX01 print?

Filament compatibility for the CEL Robox RBX01: the materials CEL lists for it.

Filament Suitability Notes
PLA Great On the maker's list of materials for this printer.
PETG Great On the maker's list of materials for this printer.
TPU & flexibles Great On the maker's list of materials for this printer.
ABS & ASA Great On the maker's list of materials for this printer.
Nylon (PA) Great On the maker's list of materials for this printer.
Polycarbonate (PC) Great On the maker's list of materials for this printer.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Printers like the CEL Robox RBX01 that work with SimplyPrint

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.

  • Sovol Zero 3D printer
    Sovol Zero
    152 x 152 x 152 mm
    Launched March 2025
    Connects with: Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • PrintersForAnts Salad Fork 3D printer
    PrintersForAnts Salad Fork
    180 x 180 x 150 mm
    Launched September 2021
    Connects with: Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • Monoprice Maker Ultimate 2 3D printer
    Monoprice Maker Ultimate 2
    200 x 150 x 150 mm
    Connects with: OctoPrint
    Similar build volume · Also prints ABS & ASA, Nylon (PA)
    Compatible
  • Bambu Lab P1S 3D printer
    Bambu Lab P1S
    256 x 256 x 256 mm
    Launched July 13, 2023
    Connects with: SimplyPrint Client
    Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Verified by SimplyPrint
Compare 3D printers that work with SimplyPrint All CEL printers

Frequently asked questions

Is the CEL Robox RBX01 compatible with SimplyPrint?

To our knowledge the CEL Robox RBX01 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

What slicer should I use for the CEL Robox RBX01?

None of the slicers in SimplyPrint's cloud can slice for the CEL Robox RBX01 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

What filament can the CEL Robox RBX01 print?

CEL lists PLA, ABS & ASA, Nylon (PA), Polycarbonate (PC), PETG and TPU & flexibles for the Robox RBX01.

What is the CEL Robox RBX01's bed size and build volume?

The CEL Robox RBX01 has a 210 x 150 mm print bed and prints up to 100 mm tall, a build volume of about 210 x 150 x 100 mm. See the full specifications table above for bed type, temperatures and more.

When did the CEL Robox RBX01 come out?

CEL launched the Robox RBX01 in November 2014.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.