BigRep ONE.5X: specs, SimplyPrint compatibility and setup

By BigRep, Germany Launched April 2026

BigRep ONE.5X image

Does it work with SimplyPrint?

Not expected to work Most likely not

We don't expect it to work, but we could be wrong.

Find out if it works

BigRep ONE.5X at a glance

The BigRep ONE.5X is a professional large-format filament printer with a one cubic metre build volume (1005 mm in each direction) and dual extruders reaching 280 degrees C. It is for companies, labs and universities that need full-scale parts, tooling and prototypes in one piece.

Build volume
1005 x 1005 x 1005 mm
Prints well
PLA, PETG, TPU & flexibles, Carbon-fiber & glass-filled
All specifications

Connect the BigRep ONE.5X to SimplyPrint

Does the BigRep ONE.5X 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint

    Not expected to work

    Find out how to check
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not expected to work

    Closed industrial machine with BigRep's own controller, HMI and CONNECT software; nothing points to Klipper. Source

    Find out how to check
  • OctoPrint

    OctoPrint

    Directly, over USB

    Not expected to work

    Industrial controller with its own HMI; no USB port for a computer is documented. Source

    Find out how to check

No known way to connect it to SimplyPrint

Unfortunately, the BigRep ONE.5X is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.

How we determine compatibility

We consider a printer compatible if it works with one or more of the following:

  • SimplyPrint custom integration for this specific model
  • OctoPrint support (requires the printer to support serial printing)
  • Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)

OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.

Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.

See printers that work View Compatible Printers

What slicer to use for the BigRep ONE.5X

None of the slicers in SimplyPrint's cloud can slice for the BigRep ONE.5X that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

No profile for the BigRep ONE.5X

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the BigRep ONE.5X.

No online slicing for the BigRep ONE.5X

BigRep ONE.5X specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 1005 x 1005 x 1005 mm
Bed type Square
Bed size 1005 x 1005 mm
Max print height 1005 mm

Printing

Max extruder temperature 280 °C
Has heated bed Yes
Max bed temperature 80 °C
Number of nozzles 2
Toolheads 2
Direct drive No
Probing tool / Auto Bed Leveling Yes
Filament width 2.85 mm

Multi-material

Toolchanger or hotend changer No

Connecting

Supports serial printing Unknown
Shipped firmware Unknown

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand BigRep
Printer model name ONE.5X
Made by a company from Germany
Launched April 2026
Still made Yes

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the BigRep ONE.5X print?

Filament compatibility for the BigRep ONE.5X: the materials BigRep lists for it.

Filament Suitability Notes
PLA Great On the maker's list of materials for this printer.
PETG Great On the maker's list of materials for this printer.
TPU & flexibles Great On the maker's list of materials for this printer.
ABS & ASA With care Borderline - the bed runs a little cool and an enclosure is essential for ABS and ASA.
Nylon (PA) Not ideal Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure.
Polycarbonate (PC) Not ideal Not recommended - PC needs very high hotend temps and an enclosed chamber.
Carbon-fiber & glass-filled Great On the maker's list of materials for this printer.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

When to choose the BigRep ONE.5X

Choose the ONE.5X when the part itself is the problem: BigRep lists a 1005 x 1005 x 1005 mm volume, an open material system and German-built support, with training and service. It is an industrial purchase, with a weight of about 635 kg and a 208 to 240 V, 16 A supply, so it is not a printer to put in a classroom. We found no independent review of the ONE.5X, and BigRep gives no price, only a quote. For smaller engineering parts, an enclosed desktop printer such as the Qidi Max4 costs far less.

Pros

  • A 1005 x 1005 x 1005 mm build volume, so large parts print in one piece (BigRep).
  • Dual PEX2 extruders in Single, Dual or Twin mode; Relay Mode takes over when a spool runs out, and Twin mode prints two identical parts at once (BigRep).
  • An open material system that takes third-party filament, with BigRep profiles for PLA, PETG, ABS, ASA, nylon, TPU and soluble BVOH (BigRep).
  • Automated calibration, adaptive bed levelling, input shaping and auto-sequential printing for non-stop production (BigRep).

Cons

  • Needs a lot of room and power: about 635 kg, 1848 x 2070 x 1668 mm and 208 to 240 V at 16 A (BigRep).
  • No price published, only a quote, and 2.85 mm filament and diamond nozzles of 0.6 mm and up mean fine detail is not its job (BigRep).
  • Not expected to connect through Klipper or OctoPrint, and our facts list no SimplyPrint Client route, so check before planning around SimplyPrint.
  • No independent review found.

Who it suits

  • Schools Not a good fit

    Industrial in size, weight and power, though BigRep names research and education as uses; it is a lab or university investment, not a classroom printer.

  • Hobbyists Not a good fit

    Far beyond a hobbyist's budget and space.

  • Businesses Good fit

    Full-scale prototypes, tooling and moulds in one piece, with BigRep's service and an open material system, but no SimplyPrint connection is expected.

  • Print farms Not a good fit

    Twin mode and auto-sequential printing help production, but each machine is huge and costly, and a SimplyPrint connection is not expected.

Written from the maker's information and independent reviews. Read more by the manufacturer

Printers like the BigRep ONE.5X that work with SimplyPrint

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.

  • MINGDA MD-1000 Pro+ 3D printer
    MINGDA MD-1000 Pro+
    1000 x 1000 x 1000 mm
    Launched 2026
    Connects with: Klipper (Moonraker)
    Similar build volume · Also prints Carbon-fiber & glass-filled
    Expected to work
  • MINGDA MD-1000D Ultra
    1000 x 1000 x 1000 mm
    Connects with: Klipper (Moonraker)
    Similar build volume · Also prints Carbon-fiber & glass-filled
    Expected to work
  • Bambu Lab P2S Combo 3D printer
    Bambu Lab P2S Combo
    256 x 256 x 256 mm
    Launched October 14, 2025
    Connects with: SimplyPrint Client
    Also prints Carbon-fiber & glass-filled
    Verified by SimplyPrint
  • Bambu Lab X2D Combo 3D printer
    Bambu Lab X2D Combo
    256 x 256 x 260 mm
    Launched April 14, 2026
    Connects with: SimplyPrint Client
    Also prints Carbon-fiber & glass-filled
    Verified by SimplyPrint
Compare 3D printers that work with SimplyPrint All BigRep printers

Frequently asked questions

Is the BigRep ONE.5X compatible with SimplyPrint?

To our knowledge the BigRep ONE.5X is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

What slicer should I use for the BigRep ONE.5X?

None of the slicers in SimplyPrint's cloud can slice for the BigRep ONE.5X that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

What filament can the BigRep ONE.5X print?

BigRep lists PLA, PETG, TPU & flexibles and Carbon-fiber & glass-filled for the ONE.5X.

What is the BigRep ONE.5X's bed size and build volume?

The BigRep ONE.5X has a 1005 x 1005 mm print bed and prints up to 1005 mm tall, a build volume of about 1005 x 1005 x 1005 mm. See the full specifications table above for bed type, temperatures and more.

When did the BigRep ONE.5X come out?

BigRep launched the ONE.5X in April 2026.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.