Afinia H800+: specs, SimplyPrint compatibility and setup

By Afinia, USA Launched 2015 No longer sold

Does it work with SimplyPrint?

Not expected to work Most likely not

We don't expect it to work, but we could be wrong.

Find out if it works What to buy instead

Afinia H800+ at a glance

The Afinia H800+ is a 3D printer by Afinia with a 255 x 205 x 205 mm build volume.

Build volume
255 x 205 x 205 mm
Enclosure
Fully enclosed
Prints well
PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA)
Connectivity
USB, Wi-Fi
All specifications

Connect the Afinia H800+ to SimplyPrint

Does the Afinia H800+ 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint

    Not expected to work

    Find out how to check
  • OctoPrint

    OctoPrint

    Directly, over USB

    Not expected to work

    Prints jobs sent from Afinia Studio (STL/UP3) over USB or Wi-Fi, not G-code over serial. Source

    Find out how to check
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not compatible

    Ships Tiertime's closed firmware, not Klipper. Source

No known way to connect it to SimplyPrint

Unfortunately, the Afinia H800+ is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.

How we determine compatibility

We consider a printer compatible if it works with one or more of the following:

  • SimplyPrint custom integration for this specific model
  • OctoPrint support (requires the printer to support serial printing)
  • Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)

OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.

Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.

See printers that work View Compatible Printers

What slicer to use for the Afinia H800+

None of the slicers in SimplyPrint's cloud can slice for the Afinia H800+ that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

No profile for the Afinia H800+

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Afinia H800+.

No online slicing for the Afinia H800+

Afinia H800+ specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 255 x 205 x 205 mm
Bed type Rectangle
Bed size 255 x 205 mm
Max print height 205 mm

Printing

Enclosure Fully enclosed
Max extruder temperature 260 °C
Has heated bed Yes
Max bed temperature 100 °C
Number of nozzles 1
Toolheads 1
Direct drive Yes
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Connecting

Connectivity USB, Wi-Fi
Supports serial printing Unknown
Shipped firmware The maker's own

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Afinia
Printer model name H800+
Made by a company from USA
Launched 2015
Still made No, discontinued

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Afinia H800+ print?

Filament compatibility for the Afinia H800+: the materials Afinia lists for it.

Filament Suitability Notes
PLA Great On the maker's list of materials for this printer.
PETG Great On the maker's list of materials for this printer.
TPU & flexibles Great On the maker's list of materials for this printer.
ABS & ASA Great On the maker's list of materials for this printer.
Nylon (PA) Good Doable with care - dry the filament thoroughly, and an enclosure helps a lot.
Polycarbonate (PC) Not ideal Not recommended - PC needs very high hotend temps and an enclosed chamber.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Printers like the Afinia H800+ that work with SimplyPrint

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.

  • Creality K1C 3D printer
    Creality K1C
    220 x 220 x 250 mm
    Launched January 25, 2024
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA)
    Compatible
  • Creality K1 3D printer
    Creality K1
    220 x 220 x 250 mm
    Launched April 2023
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA)
    Compatible
  • Anycubic Kobra S1 3D printer
    Anycubic Kobra S1
    250 x 250 x 250 mm
    Launched January 2, 2025
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA)
    Compatible
  • Prusa CORE One 3D printer
    Prusa CORE One
    250 x 220 x 270 mm
    Launched January 2025
    Connects with: SimplyPrint Client, OctoPrint, Prusa direct firmware
    Similar build volume · Also prints ABS & ASA, Nylon (PA)
    Compatible
Compare 3D printers that work with SimplyPrint All Afinia printers

What to buy instead of the Afinia H800+

Afinia no longer makes or sells the H800+ new. These printers like it are on sale today, and work with SimplyPrint.

Frequently asked questions

Is the Afinia H800+ compatible with SimplyPrint?

To our knowledge the Afinia H800+ is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

What slicer should I use for the Afinia H800+?

None of the slicers in SimplyPrint's cloud can slice for the Afinia H800+ that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

What filament can the Afinia H800+ print?

Afinia lists PLA, ABS & ASA, PETG and TPU & flexibles for the H800+.

What is the Afinia H800+'s bed size and build volume?

The Afinia H800+ has a 255 x 205 mm print bed and prints up to 205 mm tall, a build volume of about 255 x 205 x 205 mm. See the full specifications table above for bed type, temperatures and more.

When did the Afinia H800+ come out?

Afinia launched the H800+ in 2015. It has since been discontinued, so you can't buy it new from Afinia any more.

Is the Afinia H800+ still sold?

No. Afinia no longer makes or sells the H800+ new. Printers like it you can buy today: Creality K1C, Creality K1 and Anycubic Kobra S1.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.