Afinia H+1: specs, SimplyPrint compatibility and setup

By Afinia, USA Launched 2019

Afinia H+1 image

Does it work with SimplyPrint?

Not expected to work Most likely not

We don't expect it to work, but we could be wrong.

Find out if it works

Afinia H+1 at a glance

The Afinia H+1 is a 3D printer by Afinia with a 205 x 255 x 225 mm build volume.

Build volume
205 x 255 x 225 mm
Enclosure
Fully enclosed
Prints well
PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
Connectivity
USB, Wi-Fi, Ethernet
All specifications

Connect the Afinia H+1 to SimplyPrint

Does the Afinia H+1 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint

    Not expected to work

    Find out how to check
  • OctoPrint

    OctoPrint

    Directly, over USB

    Not expected to work

    Prints jobs from Afinia Studio in its own UP3/tsk format over USB, Wi-Fi or Ethernet, not G-code over serial. Source

    Find out how to check
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not compatible

    Ships Tiertime's closed firmware, not Klipper. Source

No known way to connect it to SimplyPrint

Unfortunately, the Afinia H+1 is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.

How we determine compatibility

We consider a printer compatible if it works with one or more of the following:

  • SimplyPrint custom integration for this specific model
  • OctoPrint support (requires the printer to support serial printing)
  • Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)

OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.

Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.

See printers that work View Compatible Printers

What slicer to use for the Afinia H+1

None of the slicers in SimplyPrint's cloud can slice for the Afinia H+1 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

No profile for the Afinia H+1

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Afinia H+1.

No online slicing for the Afinia H+1

Afinia H+1 specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 205 x 255 x 225 mm
Bed type Rectangle
Bed size 205 x 255 mm
Max print height 225 mm

Printing

Enclosure Fully enclosed
Max extruder temperature 299 °C
Has heated bed Yes
Max bed temperature 100 °C
Number of nozzles 1
Toolheads 1
Direct drive Yes
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Multi-material

Toolchanger or hotend changer No
IDEX (independent dual extruders) No

Connecting

Connectivity USB, Wi-Fi, Ethernet
Prints from USB stick
Supports serial printing Unknown
Shipped firmware The maker's own

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Afinia
Printer model name H+1
Made by a company from USA
Launched 2019

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Afinia H+1 print?

Filament compatibility for the Afinia H+1: the materials Afinia lists for it.

Filament Suitability Notes
PLA Great On the maker's list of materials for this printer.
PETG Great On the maker's list of materials for this printer.
TPU & flexibles Great On the maker's list of materials for this printer.
ABS & ASA Great On the maker's list of materials for this printer.
Nylon (PA) Good Doable with care - dry the filament thoroughly, and an enclosure helps a lot.
Polycarbonate (PC) Great On the maker's list of materials for this printer.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Printers like the Afinia H+1 that work with SimplyPrint

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.

  • FrankenVoron Tridex 3D printer
    FrankenVoron Tridex
    225 x 250 x 250 mm
    Launched December 2021
    Connects with: Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Expected to work
  • SnakeOil-XY SnakeOil-XY 3D printer
    SnakeOil-XY SnakeOil-XY
    250 x 240 x 230 mm
    Launched June 2021
    Connects with: Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • Bambu Lab P1S 3D printer
    Bambu Lab P1S
    256 x 256 x 256 mm
    Launched July 13, 2023
    Connects with: SimplyPrint Client
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Verified by SimplyPrint
  • Bambu Lab P2S Combo 3D printer
    Bambu Lab P2S Combo
    256 x 256 x 256 mm
    Launched October 14, 2025
    Connects with: SimplyPrint Client
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Verified by SimplyPrint
Compare 3D printers that work with SimplyPrint All Afinia printers

Frequently asked questions

Is the Afinia H+1 compatible with SimplyPrint?

To our knowledge the Afinia H+1 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

What slicer should I use for the Afinia H+1?

None of the slicers in SimplyPrint's cloud can slice for the Afinia H+1 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

What filament can the Afinia H+1 print?

Afinia lists PLA, PETG, TPU & flexibles, ABS & ASA and Polycarbonate (PC) for the H+1.

What is the Afinia H+1's bed size and build volume?

The Afinia H+1 has a 205 x 255 mm print bed and prints up to 225 mm tall, a build volume of about 205 x 255 x 225 mm. See the full specifications table above for bed type, temperatures and more.

When did the Afinia H+1 come out?

Afinia launched the H+1 in 2019.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.