Table of Contents
Learn all about the specifications of the XYZprinting da Vinci Jr 1.0 Pro 3D printer, whether it's compatible with OctoPrint, Mainsail, Fluidd and SimplyPrint, and how to set each of them up.
Printer Compatibility for XYZprinting da Vinci Jr 1.0 Pro
Does the XYZprinting da Vinci Jr 1.0 Pro 3D printer work with OctoPrint, Mainsail, Fluidd and SimplyPrint?
Figuring out if your particular printer works with OctoPrint, Mainsail, Fluidd or SimplyPrint can be a challenging task - especially if you're new to 3D printing - as there are thousands of printers out there.
We're here to make it a little easier for you, by answering the question; is the XYZprinting da Vinci Jr 1.0 Pro compatible with OctoPrint, Mainsail, Fluidd and SimplyPrint?
Did we make a mistake? Is any of this data wrong? Let us know!
No Current Compatibility
Unfortunately, the XYZprinting da Vinci Jr 1.0 Pro is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
What Slicer to Use for XYZprinting da Vinci Jr 1.0 Pro
Find the best slicing software for your XYZprinting da Vinci Jr 1.0 Pro 3D printer.
Compatible Slicers for XYZprinting da Vinci Jr 1.0 Pro
At SimplyPrint we support the following 6 slicers. But, that does not mean that no other slicers are compatible with this the XYZprinting da Vinci Jr 1.0 Pro. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the XYZprinting da Vinci Jr 1.0 Pro.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by XYZprinting—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for XYZprinting da Vinci Jr 1.0 Pro
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your XYZprinting da Vinci Jr 1.0 Pro. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
What filament can the XYZprinting da Vinci Jr 1.0 Pro print?
A guide to the materials the XYZprinting da Vinci Jr 1.0 Pro can handle, based on its hotend specs.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | With care | Marginal - PETG prefers a hotter bed (~70-80C) than this printer reaches. |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
XYZprinting da Vinci Jr 1.0 Pro Printer Specifications: Bed Type, Size, Print Height and More
Discover the key features of the XYZprinting da Vinci Jr 1.0 Pro 3D printer model. From its bed type to its size, print height, and more, we provide detailed specifications to help you understand the printer's capabilities.
| Specification | Details |
|---|---|
| Printer model name | da Vinci Jr 1.0 Pro |
| Printer manufacturer / brand | XYZprinting |
| Bed type | Square |
| Bed size | 150 x 150 mm |
| Max print height | 150mm |
| Has heated bed | No |
| Max extruder temperature | 240° |
| Filament width | 1.75mm |
| Number of nozzles | 1 |
| Probing tool / Auto Bed Leveling | Yes |
| Direct drive | No |
| Supports serial printing | Yes |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Did we make a mistake? Is any of this data wrong? Let us know!
Frequently asked questions
Is the XYZprinting da Vinci Jr 1.0 Pro compatible with SimplyPrint?
To our knowledge the XYZprinting da Vinci Jr 1.0 Pro is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the XYZprinting da Vinci Jr 1.0 Pro?
Cura, PrusaSlicer and OrcaSlicer all work with the XYZprinting da Vinci Jr 1.0 Pro, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
What filament can the XYZprinting da Vinci Jr 1.0 Pro print?
Based on its specs (hotend up to 240C, no heated bed), the XYZprinting da Vinci Jr 1.0 Pro handles PLA well. See the full filament guide above for ABS, nylon, PC and composites.
What is the XYZprinting da Vinci Jr 1.0 Pro's build volume?
The XYZprinting da Vinci Jr 1.0 Pro has a build volume of about 150 x 150 x 150 mm. See the full specifications table above for bed type, temperatures and more.
Final words
We've reached the end of our XYZprinting da Vinci Jr 1.0 Pro information guide. We devote substantial time to research and gather data on as many 3D printers as possible, understanding the challenge of finding comprehensive, reliable information all in one place. Our primary focus is providing insights into the compatibility of specific printers with the most popular 3D printing clients. We hope this guide has helped answer your questions!