Stratasys F900 at a glance
Stratasys's largest FDM production printer: a 914 x 610 x 914 mm heated build chamber and the full range of Stratasys's FDM materials, ULTEM, PPSF and Antero included. It is built for production parts and tooling in regulated industries such as aerospace.
- Build volume
- 914 x 610 x 914 mm
- Enclosure
- Fully enclosed
- Prints well
- PLA, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- Connectivity
- Ethernet
Connect the Stratasys F900 to SimplyPrint
Does the Stratasys F900 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
The maker's cloud
Possible, not built yet
Prints through Stratasys's GrabCAD Print, and GrabCAD's SDK gives software vendors APIs to connect Stratasys FDM printers to their systems. SimplyPrint could build support on it, but it isn't built yet. Source
-
SimplyPrint Client
Not compatible
Runs Stratasys's closed controller and takes jobs only through Stratasys's own software, such as GrabCAD Print. Source
-
Klipper (Moonraker)
Not compatible
Runs Stratasys's closed controller and prints from Stratasys's own software; no Klipper or Moonraker is documented. Source
-
OctoPrint
Directly, over USB
Not compatible
Runs Stratasys's closed controller and takes jobs only through Stratasys's own software, such as GrabCAD Print; no OctoPrint or serial control is documented. Source
What slicer to use for the Stratasys F900
None of the slicers in SimplyPrint's cloud can slice for the Stratasys F900 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
No profile for the Stratasys F900
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Stratasys F900.
No online slicing for the Stratasys F900
Stratasys F900 specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 914 x 610 x 914 mm |
|---|---|
| Bed type | Rectangle |
| Bed size | 914 x 610 mm |
| Max print height | 914 mm |
Printing
| Enclosure | Fully enclosed |
|---|---|
| Max extruder temperature | 415 °C |
| Has heated bed | No |
| Heated chamber | Up to 220 °C |
| Number of nozzles | 1 |
| Toolheads | 2 |
| Direct drive | No |
| Probing tool / Auto Bed Leveling | No |
| Filament width | 1.75 mm |
Connecting
| Connectivity | Ethernet |
|---|---|
| Supports serial printing | No |
| Shipped firmware | The maker's own |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Stratasys |
|---|---|
| Printer model name | F900 |
| Launched | April 23, 2018 |
| Still made | Yes |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Stratasys F900 print?
Filament compatibility for the Stratasys F900: the materials Stratasys lists for it.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | With care | Marginal - PETG prefers a hotter bed (~70-80C) than this printer reaches. |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
| High-temperature (PEI, PEEK, PEKK) | Great | On the maker's list of materials for this printer. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
When to choose the Stratasys F900
Choose it for the biggest parts in high-performance materials, or where certified production matters. The F3300 prints faster in a smaller chamber; the Fortus 450mc covers most of the same materials in a 406 x 355 x 406 mm envelope.
Pros
- 914 x 610 x 914 mm: Stratasys's largest FDM build chamber.
- Prints ULTEM 1010 and 9085, PPSF, Antero PEKK, nylons, PC, ASA and ABS.
- +/- 0.089 mm accuracy, with an optional FDC cabinet for longer unattended runs.
- Secure connectivity options, including STIG compliance for US government use.
Cons
- Not supported by SimplyPrint yet: support could be built on GrabCAD's SDK.
- Runs Stratasys's closed controller with its own software, so there is no OctoPrint or Klipper route.
- Materials beyond Stratasys's own need the separately licensed OpenAM software.
- Weighs 2,869 kg and needs three-phase power.
Who it suits
-
Schools Not a good fit
A 2.9-tonne production machine.
-
Hobbyists Not a good fit
Built for industrial production.
-
Businesses Great fit
Large, certified production parts in high-performance thermoplastics.
-
Print farms Can work
GrabCAD Print queues jobs across Stratasys printers, but SimplyPrint cannot manage it today.
Written from the maker's information and independent reviews. Read more by the manufacturer
Printers like the Stratasys F900 that work with SimplyPrint
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.
-
MINGDA Raptor 800
800 x 800 x 800 mmLaunched 2026Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filledExpected to work -
Tronxy VEHO 800A
800 x 800 x 800 mmLaunched July 2025Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filledCompatible -
Modix BIG-180X
1800 x 600 x 660 mmLaunched 2020Connects with: Duet (RepRapFirmware)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filledCompatible -
Bambu Lab P1S
256 x 256 x 256 mmLaunched July 13, 2023Connects with: SimplyPrint ClientAlso prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Verified by SimplyPrint
Frequently asked questions
Is the Stratasys F900 compatible with SimplyPrint?
Not yet. The maker's software would allow SimplyPrint to connect to the Stratasys F900, but we haven't built it.
What slicer should I use for the Stratasys F900?
None of the slicers in SimplyPrint's cloud can slice for the Stratasys F900 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
What filament can the Stratasys F900 print?
Stratasys lists ABS & ASA, Polycarbonate (PC), Nylon (PA), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the F900.
What is the Stratasys F900's bed size and build volume?
The Stratasys F900 has a 914 x 610 mm print bed and prints up to 914 mm tall, a build volume of about 914 x 610 x 914 mm. See the full specifications table above for bed type, temperatures and more.
When did the Stratasys F900 come out?
Stratasys launched the F900 on April 23, 2018.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.