Stratasys F770 at a glance
Stratasys's large-format FDM printer: a 1,000 x 610 x 610 mm build envelope in a fully heated chamber, for ASA and ABS-M30 with soluble support. It makes large prototypes, jigs and fixtures in one piece.
- Build volume
- 1000 x 610 x 610 mm
- Enclosure
- Fully enclosed
- Prints well
- ABS & ASA
- Built-in camera
- Yes
- Connectivity
- Ethernet, Wi-Fi
Connect the Stratasys F770 to SimplyPrint
Does the Stratasys F770 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
The maker's cloud
Possible, not built yet
Prints through Stratasys's GrabCAD Print. GrabCAD's SDK gives software vendors APIs to connect Stratasys printers to their systems; its first packages covered the F123 Series, F900 and Fortus 450mc. SimplyPrint could build support on it, but it isn't built yet. Source
-
SimplyPrint Client
Not compatible
Runs Stratasys's closed controller and takes jobs only through Stratasys's own software, such as GrabCAD Print. Source
-
Klipper (Moonraker)
Not compatible
Runs Stratasys's closed controller and prints from Stratasys's own software; no Klipper or Moonraker is documented. Source
-
OctoPrint
Directly, over USB
Not compatible
Runs Stratasys's closed controller and takes jobs only through Stratasys's own software, such as GrabCAD Print; no OctoPrint or serial control is documented. Source
What slicer to use for the Stratasys F770
None of the slicers in SimplyPrint's cloud can slice for the Stratasys F770 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
No profile for the Stratasys F770
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Stratasys F770.
No online slicing for the Stratasys F770
Stratasys F770 specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 1000 x 610 x 610 mm |
|---|---|
| Bed type | Rectangle |
| Bed size | 1000 x 610 mm |
| Max print height | 610 mm |
Printing
| Enclosure | Fully enclosed |
|---|---|
| Max extruder temperature | 330 °C |
| Has heated bed | No |
| Heated chamber | Yes |
| Number of nozzles | 1 |
| Toolheads | 2 |
| Direct drive | No |
| Probing tool / Auto Bed Leveling | No |
| Filament width | 1.75 mm |
Connecting
| Connectivity | Ethernet, Wi-Fi |
|---|---|
| Built-in camera | Yes |
| Supports serial printing | No |
| Shipped firmware | The maker's own |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Stratasys |
|---|---|
| Printer model name | F770 |
| Launched | April 27, 2021 |
| Still made | Yes |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Stratasys F770 print?
Filament compatibility for the Stratasys F770: the materials Stratasys lists for it. It prints only Stratasys's own materials.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. |
| PETG | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. |
| TPU & flexibles | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. |
| Polycarbonate (PC) | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. |
| Carbon-fiber & glass-filled | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
When to choose the Stratasys F770
Choose it when parts are long rather than exotic: Stratasys calls its build chamber the longest fully heated one on the market, 1,171 mm on the diagonal. For ULTEM, nylon or PC, the F900 or F3300 is the one.
Pros
- 1,000 x 610 x 610 mm build envelope, up to 1,171 mm on the diagonal.
- Fully heated build chamber and soluble support.
- Material boxes of 3,277 cm3 run up to 140 hours unattended.
- A built-in camera, with status checks from GrabCAD Print on a phone.
Cons
- Not supported by SimplyPrint yet: support could be built on GrabCAD's SDK.
- Runs Stratasys's closed controller with GrabCAD Print, so there is no OctoPrint or Klipper route.
- Prints ASA and ABS-M30 only, and only Stratasys's own material.
- Needs three-phase power and weighs 658 kg.
Who it suits
-
Schools Not a good fit
A 658 kg machine on three-phase power with a narrow material range.
-
Hobbyists Not a good fit
Built for industrial large-format parts.
-
Businesses Great fit
Large prototypes and tooling in one piece instead of glued sections.
-
Print farms Can work
GrabCAD Print queues jobs across Stratasys printers, but SimplyPrint cannot manage it today.
Written from the maker's information and independent reviews. Read more by the manufacturer
Printers like the Stratasys F770 that work with SimplyPrint
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.
-
MINGDA Raptor 800
800 x 800 x 800 mmLaunched 2026Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASAExpected to work -
Tronxy VEHO 800A
800 x 800 x 800 mmLaunched July 2025Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASACompatible -
Bambu Lab P1S
256 x 256 x 256 mmLaunched July 13, 2023Connects with: SimplyPrint ClientAlso prints ABS & ASAVerified by SimplyPrint -
Creality K1 Max
300 x 300 x 300 mmLaunched July 14, 2023Connects with: SimplyPrint Client, Klipper (Moonraker)Also prints ABS & ASACompatible
Frequently asked questions
Is the Stratasys F770 compatible with SimplyPrint?
Not yet. The maker's software would allow SimplyPrint to connect to the Stratasys F770, but we haven't built it.
What slicer should I use for the Stratasys F770?
None of the slicers in SimplyPrint's cloud can slice for the Stratasys F770 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
What filament can the Stratasys F770 print?
Stratasys lists ABS & ASA for the F770. It prints only Stratasys's own materials.
What is the Stratasys F770's bed size and build volume?
The Stratasys F770 has a 1000 x 610 mm print bed and prints up to 610 mm tall, a build volume of about 1000 x 610 x 610 mm. See the full specifications table above for bed type, temperatures and more.
When did the Stratasys F770 come out?
Stratasys launched the F770 on April 27, 2021.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.