China
Raise3D E2CF at a glance
The Raise3D E2CF is a 3D printer by Raise3D with a 330 x 240 x 240 mm build volume.
- Build volume
- 330 x 240 x 240 mm
- Enclosure
- Fully enclosed
- Max print speed
- 150 mm/s
- Motion system
- Other kinematics
- Prints well
- PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Built-in camera
- Yes
- Connectivity
- Wi-Fi, Ethernet, USB
Connect the Raise3D E2CF to SimplyPrint
Does the Raise3D E2CF 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
Klipper (Moonraker)
Not expected to work
Ships Raise3D's RepRapFirmware-based motion firmware under its own embedded-Linux UI; no Klipper or Moonraker. Source
-
OctoPrint
Directly, over USB
Not expected to work
No USB device port for a computer: the USB ports are host ports for flash drives, and the motion controller is driven by Raise3D's embedded-Linux logic board (ideaMaker, RaiseCloud, Raise3D API). Not expected to work as shipped. Source
No known way to connect it to SimplyPrint
Unfortunately, the Raise3D E2CF is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
What slicer to use for the Raise3D E2CF
Use Raise3D's own slicer, ideaMaker: none of the slicers in SimplyPrint's cloud has a profile for the Raise3D E2CF, and it doesn't take standard G-code that we know of.
Raise3D's own slicer
-
ideaMakerMade by Raise3D, not in the SimplyPrint cloud
No profile for the Raise3D E2CF
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Raise3D E2CF.
No online slicing for the Raise3D E2CF
Get ideaMakerThe app for the Raise3D E2CF
Raise3D's own app is RaiseCloud.
Raise3D E2CF specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 330 x 240 x 240 mm |
|---|---|
| Bed type | Square |
| Bed size | 330 x 240 mm |
| Max print height | 240 mm |
Printing
| Enclosure | Fully enclosed |
|---|---|
| Motion system | Other kinematics |
| Max print speed | 150 mm/s |
| Max extruder temperature | 330 °C |
| Has heated bed | Yes |
| Max bed temperature | 110 °C |
| Number of nozzles | 2 |
| Toolheads | 2 |
| Direct drive | Yes |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|---|
| IDEX (independent dual extruders) | Yes |
Connecting
| Connectivity | Wi-Fi, Ethernet, USB |
|---|---|
| Built-in camera | Yes |
| Prints from | USB stick |
| Supports serial printing | Unknown |
| Shipped firmware | The maker's own |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Raise3D |
|---|---|
| Printer model name | E2CF |
| Made by a company from | China |
| Launched | August 2021 |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Raise3D E2CF print?
Filament compatibility for the Raise3D E2CF: the materials Raise3D lists for it.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Printers like the Raise3D E2CF that work with SimplyPrint
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.
-
Bambu Lab P1S
256 x 256 x 256 mmLaunched July 13, 2023Connects with: SimplyPrint ClientSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Verified by SimplyPrint -
Creality K1 Max
300 x 300 x 300 mmLaunched July 14, 2023Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible -
Creality CR-5 Pro H
300 x 225 x 380 mmLaunched February 2023Connects with: OctoPrintSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible -
QIDI X-Plus 3
280 x 280 x 270 mmLaunched March 2023Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible
Where to buy the Raise3D E2CF
Official store
Best for USA: Raise3D's store for the US
Bought straight from Raise3D, from the shop that serves where you are.
Frequently asked questions
Is the Raise3D E2CF compatible with SimplyPrint?
To our knowledge the Raise3D E2CF is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the Raise3D E2CF?
Use Raise3D's own slicer, ideaMaker: none of the slicers in SimplyPrint's cloud has a profile for the Raise3D E2CF, and it doesn't take standard G-code that we know of.
What filament can the Raise3D E2CF print?
Raise3D lists PLA, PETG, ABS & ASA, Polycarbonate (PC), Nylon (PA) and Carbon-fiber & glass-filled for the E2CF.
What is the Raise3D E2CF's bed size and build volume?
The Raise3D E2CF has a 330 x 240 mm print bed and prints up to 240 mm tall, a build volume of about 330 x 240 x 240 mm. See the full specifications table above for bed type, temperatures and more.
When did the Raise3D E2CF come out?
Raise3D launched the E2CF in August 2021.
Where can I buy the Raise3D E2CF?
From Raise3D's own store, which has shops for the US. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.