China
KOKONI EC2 at a glance
The KOKONI EC2 is a 3D printer by KOKONI with a 100 x 100 x 60 mm build volume.
- Build volume
- 100 x 100 x 60 mm
- Enclosure
- Fully enclosed
- Max print speed
- 100 mm/s
- Prints well
- PLA
- Built-in camera
- Yes
- Connectivity
- Wi-Fi
Connect the KOKONI EC2 to SimplyPrint
Does the KOKONI EC2 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
No known way to connect it to SimplyPrint
Unfortunately, the KOKONI EC2 is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
What slicer to use for the KOKONI EC2
None of the slicers in SimplyPrint's cloud can slice for the KOKONI EC2 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
No profile for the KOKONI EC2
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the KOKONI EC2.
No online slicing for the KOKONI EC2
KOKONI EC2 specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 100 x 100 x 60 mm |
|---|---|
| Bed type | Square |
| Bed size | 100 x 100 mm |
| Max print height | 60 mm |
Printing
| Enclosure | Fully enclosed |
|---|---|
| Max print speed | 100 mm/s |
| Max extruder temperature | 260 °C |
| Has heated bed | No |
| Number of nozzles | 1 |
| Toolheads | 1 |
| Direct drive | No |
| Probing tool / Auto Bed Leveling | No |
| Filament width | 1.75 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|---|
| IDEX (independent dual extruders) | No |
Connecting
| Connectivity | Wi-Fi |
|---|---|
| Built-in camera | Yes |
| Supports serial printing | Unknown |
| Shipped firmware | Unknown |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | KOKONI |
|---|---|
| Printer model name | EC2 |
| Made by a company from | China |
| Launched | October 2023 |
| Still made | Yes |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the KOKONI EC2 print?
Filament compatibility for the KOKONI EC2: the materials KOKONI lists for it.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | With care | Marginal - PETG prefers a hotter bed (~70-80C) than this printer reaches. |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Printers like the KOKONI EC2 that work with SimplyPrint
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.
-
Toybox Toybox
70 x 80 x 90 mmLaunched August 2017Connects with: OctoPrintSimilar build volumeCompatible
Where to buy the KOKONI EC2
Official store
Best for USA: KOKONI's global store
Bought straight from KOKONI, from the shop that serves where you are.
Frequently asked questions
Is the KOKONI EC2 compatible with SimplyPrint?
To our knowledge the KOKONI EC2 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the KOKONI EC2?
None of the slicers in SimplyPrint's cloud can slice for the KOKONI EC2 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
What filament can the KOKONI EC2 print?
KOKONI lists PLA for the EC2.
What is the KOKONI EC2's bed size and build volume?
The KOKONI EC2 has a 100 x 100 mm print bed and prints up to 60 mm tall, a build volume of about 100 x 100 x 60 mm. See the full specifications table above for bed type, temperatures and more.
When did the KOKONI EC2 come out?
KOKONI launched the EC2 in October 2023.
Where can I buy the KOKONI EC2?
From KOKONI's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.