China
Intamsys FUNMAT PRO 410 at a glance
The Intamsys FUNMAT PRO 410 is a 3D printer by Intamsys with a 305 x 305 x 406 mm build volume.
- Build volume
- 305 x 305 x 406 mm
- Enclosure
- Fully enclosed
- Max print speed
- 300 mm/s
- Prints well
- PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- Built-in camera
- Yes
- Connectivity
- Wi-Fi, USB
Connect the Intamsys FUNMAT PRO 410 to SimplyPrint
Does the Intamsys FUNMAT PRO 410 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
No known way to connect it to SimplyPrint
Unfortunately, the Intamsys FUNMAT PRO 410 is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
What slicer to use for the Intamsys FUNMAT PRO 410
None of the slicers in SimplyPrint's cloud can slice for the Intamsys FUNMAT PRO 410 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
No profile for the Intamsys FUNMAT PRO 410
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Intamsys FUNMAT PRO 410.
No online slicing for the Intamsys FUNMAT PRO 410
Intamsys FUNMAT PRO 410 specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 305 x 305 x 406 mm |
|---|---|
| Bed type | Square |
| Bed size | 305 x 305 mm |
| Max print height | 406 mm |
Printing
| Enclosure | Fully enclosed |
|---|---|
| Max print speed | 300 mm/s |
| Max extruder temperature | 500 °C |
| Has heated bed | Yes |
| Max bed temperature | 160 °C |
| Heated chamber | Up to 90 °C |
| Number of nozzles | 2 |
| Toolheads | 2 |
| Direct drive | Yes |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|
Connecting
| Connectivity | Wi-Fi, USB |
|---|---|
| Built-in camera | Yes |
| Supports serial printing | Unknown |
| Shipped firmware | Unknown |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Intamsys |
|---|---|
| Printer model name | FUNMAT PRO 410 |
| Made by a company from | China |
| Launched | November 2018 |
| Still made | Yes |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Intamsys FUNMAT PRO 410 print?
Filament compatibility for the Intamsys FUNMAT PRO 410: the materials Intamsys lists for it.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
| High-temperature (PEI, PEEK, PEKK) | Great | On the maker's list of materials for this printer. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Printers like the Intamsys FUNMAT PRO 410 that work with SimplyPrint
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.
-
Creality K1 Max
300 x 300 x 300 mmLaunched July 14, 2023Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible -
Bambu Lab H2S Combo
340 x 320 x 340 mmLaunched August 26, 2025Connects with: SimplyPrint ClientSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)Verified by SimplyPrint -
Bambu Lab H2D Combo
325 x 320 x 325 mmLaunched March 25, 2025Connects with: SimplyPrint ClientSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)Verified by SimplyPrint -
Creality K2 Plus Combo
350 x 350 x 350 mmLaunched July 31, 2024Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible
Where to buy the Intamsys FUNMAT PRO 410
Official store
Best for USA: Intamsys's global store
Bought straight from Intamsys, from the shop that serves where you are.
Frequently asked questions
Is the Intamsys FUNMAT PRO 410 compatible with SimplyPrint?
To our knowledge the Intamsys FUNMAT PRO 410 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the Intamsys FUNMAT PRO 410?
None of the slicers in SimplyPrint's cloud can slice for the Intamsys FUNMAT PRO 410 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
What filament can the Intamsys FUNMAT PRO 410 print?
Intamsys lists PLA, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the FUNMAT PRO 410.
What is the Intamsys FUNMAT PRO 410's bed size and build volume?
The Intamsys FUNMAT PRO 410 has a 305 x 305 mm print bed and prints up to 406 mm tall, a build volume of about 305 x 305 x 406 mm. See the full specifications table above for bed type, temperatures and more.
When did the Intamsys FUNMAT PRO 410 come out?
Intamsys launched the FUNMAT PRO 410 in November 2018.
Where can I buy the Intamsys FUNMAT PRO 410?
From Intamsys's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.