Netherlands
Builder Extreme 3000 PRO at a glance
The Builder Extreme 3000 PRO is a 3D printer by Builder with a 1100 x 1100 x 820 mm build volume.
- Build volume
- 1100 x 1100 x 820 mm
- Max print speed
- 300 mm/s
- Prints well
- PLA, PETG, TPU & flexibles
- Built-in camera
- Yes
- Connectivity
- USB, Wi-Fi, Ethernet
Connect the Builder Extreme 3000 PRO to SimplyPrint
Does the Builder Extreme 3000 PRO 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
Klipper (Moonraker)
Not confirmed yet - help us find out
Builder does not say what firmware or controller it runs. Source
Help us confirm Be one of the first to confirm it -
OctoPrint
Directly, over USB
Not confirmed yet - help us find out
Has a USB port, but whether it prints over USB from a computer is not documented. Source
Help us confirm Be one of the first to confirm it
What slicer to use for the Builder Extreme 3000 PRO
None of the slicers in SimplyPrint's cloud can slice for the Builder Extreme 3000 PRO that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
No profile for the Builder Extreme 3000 PRO
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Builder Extreme 3000 PRO.
No online slicing for the Builder Extreme 3000 PRO
Builder Extreme 3000 PRO specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 1100 x 1100 x 820 mm |
|---|---|
| Bed type | Square |
| Bed size | 1100 x 1100 mm |
| Max print height | 820 mm |
Printing
| Max print speed | 300 mm/s |
|---|---|
| Max extruder temperature | 250 °C |
| Has heated bed | Yes |
| Max bed temperature | 60 °C |
| Number of nozzles | 1 |
| Toolheads | 1 |
| Direct drive | Yes |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Connecting
| Connectivity | USB, Wi-Fi, Ethernet |
|---|---|
| Built-in camera | Yes |
| Supports serial printing | Unknown |
| Shipped firmware | Unknown |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Builder |
|---|---|
| Printer model name | Extreme 3000 PRO |
| Made by a company from | Netherlands |
| Launched | 2021 |
| Still made | Yes |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Builder Extreme 3000 PRO print?
Filament compatibility for the Builder Extreme 3000 PRO: the materials Builder lists for it.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Printers like the Builder Extreme 3000 PRO that work with SimplyPrint
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.
-
WASP 3MT HDP
1000 x 1000 x 1000 mmLaunched November 2021Connects with: OctoPrintSimilar build volumeCompatible -
MINGDA MD-1000D
1000 x 1000 x 1000 mmLaunched 2023Connects with: Klipper (Moonraker)Similar build volumeCompatible -
re:3D Terabot 4
915 x 915 x 1000 mmLaunched January 2023Connects with: Klipper (Moonraker)Similar build volumeCompatible -
Tronxy VEHO 1000
1000 x 1000 x 1000 mmLaunched May 2023Connects with: OctoPrintSimilar build volumeExpected to work
Where to buy the Builder Extreme 3000 PRO
Official store
Best for USA: Builder's global store
Bought straight from Builder, from the shop that serves where you are.
Frequently asked questions
Is the Builder Extreme 3000 PRO compatible with SimplyPrint?
We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Builder Extreme 3000 PRO, our compatibility check tells you in a few questions how it could connect.
What slicer should I use for the Builder Extreme 3000 PRO?
None of the slicers in SimplyPrint's cloud can slice for the Builder Extreme 3000 PRO that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
What filament can the Builder Extreme 3000 PRO print?
Builder lists PLA, PETG and TPU & flexibles for the Extreme 3000 PRO.
What is the Builder Extreme 3000 PRO's bed size and build volume?
The Builder Extreme 3000 PRO has a 1100 x 1100 mm print bed and prints up to 820 mm tall, a build volume of about 1100 x 1100 x 820 mm. See the full specifications table above for bed type, temperatures and more.
When did the Builder Extreme 3000 PRO come out?
Builder launched the Extreme 3000 PRO in 2021.
Where can I buy the Builder Extreme 3000 PRO?
From Builder's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.