Afinia H400+: specs, SimplyPrint compatibility and setup

By Afinia, USA Launched September 2018 No longer sold

Afinia H400+ image

Does it work with SimplyPrint?

Not expected to work Most likely not

We don't expect it to work, but we could be wrong.

Find out if it works What to buy instead

Afinia H400+ at a glance

The Afinia H400+ is a 3D printer by Afinia with a 120 x 120 x 120 mm build volume.

Build volume
120 x 120 x 120 mm
Enclosure
Fully enclosed
Prints well
PLA, PETG, TPU & flexibles
Connectivity
USB, Wi-Fi, Ethernet
All specifications

Connect the Afinia H400+ to SimplyPrint

Does the Afinia H400+ 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint

    Not expected to work

    Find out how to check
  • OctoPrint

    OctoPrint

    Directly, over USB

    Not expected to work

    Has a USB-B port for a computer, but it prints jobs sent from Afinia Studio, not G-code over serial. Source

    Find out how to check
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not compatible

    Ships Tiertime's closed firmware, not Klipper. Source

No known way to connect it to SimplyPrint

Unfortunately, the Afinia H400+ is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.

How we determine compatibility

We consider a printer compatible if it works with one or more of the following:

  • SimplyPrint custom integration for this specific model
  • OctoPrint support (requires the printer to support serial printing)
  • Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)

OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.

Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.

See printers that work View Compatible Printers

What slicer to use for the Afinia H400+

None of the slicers in SimplyPrint's cloud can slice for the Afinia H400+ that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

No profile for the Afinia H400+

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Afinia H400+.

No online slicing for the Afinia H400+

Afinia H400+ specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 120 x 120 x 120 mm
Bed type Square
Bed size 120 x 120 mm
Max print height 120 mm

Printing

Enclosure Fully enclosed
Max extruder temperature 299 °C
Has heated bed Yes
Max bed temperature 70 °C
Number of nozzles 1
Toolheads 1
Direct drive Yes
Probing tool / Auto Bed Leveling No
Filament width 1.75 mm

Multi-material

Toolchanger or hotend changer No
IDEX (independent dual extruders) No

Connecting

Connectivity USB, Wi-Fi, Ethernet
Prints from USB stick
Supports serial printing Unknown
Shipped firmware The maker's own

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Afinia
Printer model name H400+
Made by a company from USA
Launched September 2018
Still made No, discontinued

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Afinia H400+ print?

Filament compatibility for the Afinia H400+: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles Great The direct-drive extruder feeds flexible filament well. Print slowly for clean results.
ABS & ASA Not ideal Not recommended - the bed cannot reach the ~90-110C ABS and ASA need.
Nylon (PA) Not ideal Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure.
Polycarbonate (PC) Not ideal Not recommended - PC needs very high hotend temps and an enclosed chamber.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Printers like the Afinia H400+ that work with SimplyPrint

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.

  • Voron Voron 0.X 3D printer
    Voron Voron 0.X
    120 x 120 x 120 mm
    Launched April 2020
    Connects with: Klipper (Moonraker)
    Similar build volume
    Compatible
  • LABISTS SX1 Mini 3D printer
    LABISTS SX1 Mini
    120 x 120 x 115 mm
    Launched May 2021
    Connects with: OctoPrint
    Similar build volume
    Compatible
  • Afinia QD330 3D printer
    Afinia QD330
    220 x 220 x 220 mm
    Launched February 2024
    Connects with: SimplyPrint Client
    Also by Afinia
    Expected to work
  • Malyan M200 3D printer
    Malyan M200
    120 x 120 x 120 mm
    Connects with: OctoPrint
    Similar build volume
    Compatible
Compare 3D printers that work with SimplyPrint All Afinia printers

What to buy instead of the Afinia H400+

Afinia no longer makes or sells the H400+ new. These printers like it are on sale today, and work with SimplyPrint.

Frequently asked questions

Is the Afinia H400+ compatible with SimplyPrint?

To our knowledge the Afinia H400+ is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

What slicer should I use for the Afinia H400+?

None of the slicers in SimplyPrint's cloud can slice for the Afinia H400+ that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

What filament can the Afinia H400+ print?

Based on its specs (hotend up to 299C, heated bed up to 70C), the Afinia H400+ handles PLA, PETG, or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.

What is the Afinia H400+'s bed size and build volume?

The Afinia H400+ has a 120 x 120 mm print bed and prints up to 120 mm tall, a build volume of about 120 x 120 x 120 mm. See the full specifications table above for bed type, temperatures and more.

When did the Afinia H400+ come out?

Afinia launched the H400+ in September 2018. It has since been discontinued, so you can't buy it new from Afinia any more.

Is the Afinia H400+ still sold?

No. Afinia no longer makes or sells the H400+ new. Printers like it you can buy today: Afinia QD330.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.