3DGence INDUSTRY F421: specs, SimplyPrint compatibility and setup

By 3DGence Launched February 2022

3DGence INDUSTRY F421 image

Does it work with SimplyPrint?

Not expected to work Most likely not

We don't expect it to work, but we could be wrong.

Find out if it works

3DGence INDUSTRY F421 at a glance

The 3DGence INDUSTRY F421 is a 3D printer by 3DGence with a 380 x 380 x 420 mm build volume.

Build volume
380 x 380 x 420 mm
Enclosure
Fully enclosed
Max print speed
400 mm/s
Prints well
PLA, PETG, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
Built-in camera
Yes
Connectivity
Wi-Fi, Ethernet, USB
All specifications

Connect the 3DGence INDUSTRY F421 to SimplyPrint

Does the 3DGence INDUSTRY F421 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint

    Not expected to work

    Find out how to check
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not expected to work

    Closed industrial machine run through 3DGence's own controller and CONNECT software; nothing points to Klipper. Source

    Find out how to check
  • OctoPrint

    OctoPrint

    Directly, over USB

    Not expected to work

    Takes jobs over Ethernet, Wi-Fi or a USB drive; no USB port for a computer is documented. Source

    Find out how to check

No known way to connect it to SimplyPrint

Unfortunately, the 3DGence INDUSTRY F421 is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.

How we determine compatibility

We consider a printer compatible if it works with one or more of the following:

  • SimplyPrint custom integration for this specific model
  • OctoPrint support (requires the printer to support serial printing)
  • Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)

OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.

Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.

See printers that work View Compatible Printers

What slicer to use for the 3DGence INDUSTRY F421

None of the slicers in SimplyPrint's cloud can slice for the 3DGence INDUSTRY F421 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

No profile for the 3DGence INDUSTRY F421

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the 3DGence INDUSTRY F421.

No online slicing for the 3DGence INDUSTRY F421

3DGence INDUSTRY F421 specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 380 x 380 x 420 mm
Bed type Square
Bed size 380 x 380 mm
Max print height 420 mm

Printing

Enclosure Fully enclosed
Max print speed 400 mm/s
Max extruder temperature 500 °C
Has heated bed Yes
Max bed temperature 180 °C
Heated chamber Up to 195 °C
Number of nozzles 2
Toolheads 2
Direct drive No
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Connecting

Connectivity Wi-Fi, Ethernet, USB
Built-in camera Yes
Prints from USB stick
Supports serial printing Unknown
Shipped firmware Unknown

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand 3DGence
Printer model name INDUSTRY F421
Launched February 2022

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the 3DGence INDUSTRY F421 print?

Filament compatibility for the 3DGence INDUSTRY F421: the materials 3DGence lists for it.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles With care Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA Great On the maker's list of materials for this printer.
Nylon (PA) Great On the maker's list of materials for this printer.
Polycarbonate (PC) Great On the maker's list of materials for this printer.
Carbon-fiber & glass-filled Great On the maker's list of materials for this printer.
High-temperature (PEI, PEEK, PEKK) Great On the maker's list of materials for this printer.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Printers like the 3DGence INDUSTRY F421 that work with SimplyPrint

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.

  • Creality K2 Plus Combo 3D printer
    Creality K2 Plus Combo
    350 x 350 x 350 mm
    Launched July 31, 2024
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • FLSUN S1 3D printer
    FLSUN S1
    320 x 320 x 430 mm
    Launched June 3, 2024
    Connects with: Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • Mattershaper Multiplexer 3D printer
    Mattershaper Multiplexer
    520 x 300 x 400 mm
    Launched 2022
    Connects with: OctoPrint
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
    Compatible
  • Fusion3 EDGE 3D printer
    Fusion3 EDGE
    368 x 368 x 343 mm
    Launched 2022
    Connects with: OctoPrint
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
Compare 3D printers that work with SimplyPrint All 3DGence printers

Frequently asked questions

Is the 3DGence INDUSTRY F421 compatible with SimplyPrint?

To our knowledge the 3DGence INDUSTRY F421 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

What slicer should I use for the 3DGence INDUSTRY F421?

None of the slicers in SimplyPrint's cloud can slice for the 3DGence INDUSTRY F421 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

What filament can the 3DGence INDUSTRY F421 print?

3DGence lists ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the INDUSTRY F421.

What is the 3DGence INDUSTRY F421's bed size and build volume?

The 3DGence INDUSTRY F421 has a 380 x 380 mm print bed and prints up to 420 mm tall, a build volume of about 380 x 380 x 420 mm. See the full specifications table above for bed type, temperatures and more.

When did the 3DGence INDUSTRY F421 come out?

3DGence launched the INDUSTRY F421 in February 2022.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.