A print farm runs on filament the way a car runs on fuel: the right one is boring. It prints the same from spool to spool, it's in stock when you reorder, and it doesn't jam a multi-material unit at three in the morning. Other rankings test a spool or two. This one ranks on what print farms on SimplyPrint actually stock and print, counted together across farms, with the Open Filament Database's facts.
Our picks: the best filament for print farms in 2026
PLA, PETG, ABS and ASA lines, one per brand, ranked on the score below. Every reason is read from the data; a farm count shows only once enough farms use it.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
Bambu Lab PLA Basic
Bambu Lab PLA Basic is PLA filament by Bambu Lab, a brand from China. Print it with the nozzle at 190-230 °C and the bed at 35-45 °C. It comes in 31 colours, on 1 kg spools.
- Stocked or printed by 1,000+ accounts on SimplyPrint
- Ready-made profiles in OrcaSlicer, BambuStudio, ElegooSlicer, CrealityPrint
- Tagged spools: Bambu Lab
- 31 colours
ELEGOO RAPID PETG
ELEGOO RAPID PETG is PETG filament by ELEGOO, a brand from China. Print it with the nozzle at 220-250 °C and the bed at 75-91 °C. It comes in 13 colours, on 250 g, 1 kg and 3 kg spools.
- Stocked or printed by 100+ accounts on SimplyPrint
- Ready-made profiles in PrusaSlicer, OrcaSlicer, ElegooSlicer
- Tagged spools: ELEGOO Canvas
- 13 colours
SUNLU PETG
SUNLU PETG is PETG filament by SUNLU, a brand from China. Print it with the nozzle at 240-260 °C and the bed at 60-70 °C. It comes in 39 colours, on 250 g, 500 g, 1 kg, 2 kg, 3 kg and 5 kg spools.
- Stocked or printed by 100+ accounts on SimplyPrint
- Ready-made profiles in PrusaSlicer, OrcaSlicer, BambuStudio, ElegooSlicer
- 39 colours
eSUN 3D PLA+
eSUN 3D PLA+ is PLA filament by eSUN 3D, a brand from China. Print it with the nozzle at 210-230 °C and the bed at 45-61 °C. It comes in 51 colours, on 1 kg and 3 kg spools.
- Stocked or printed by 100+ accounts on SimplyPrint
- Ready-made profiles in OrcaSlicer, BambuStudio, ElegooSlicer, CrealityPrint
- 51 colours
Creality Hyper PLA
Creality Hyper PLA is PLA filament by Creality, a brand from China. Print it with the nozzle at 190-230 °C and the bed at 25-61 °C. It comes in 15 colours, on 1 kg spools.
- Stocked or printed by 100+ accounts on SimplyPrint
- Ready-made profiles in OrcaSlicer, ElegooSlicer
- Tagged spools: Creality CFS
- 15 colours
Print farm filament, ranked
| # | Filament | Score | Material | Nozzle | On SimplyPrint |
|---|---|---|---|---|---|
| 1 | Bambu Lab PLA Basic | 100 | PLA | 190-230 °C | 1,000+ accounts |
| 2 | Bambu Lab PLA Matte | 99 | PLA | 190-230 °C | 500+ accounts |
| 3 | Bambu Lab ABS | 97 | ABS | 240-270 °C | 100+ accounts |
| 4 | Bambu Lab PETG Translucent | 97 | PETG | 230-270 °C | 100+ accounts |
| 5 | Bambu Lab PETG HF | 94 | PETG | 230-260 °C | 100+ accounts |
| 6 | ELEGOO RAPID PETG | 94 | PETG | 220-250 °C | 100+ accounts |
| 7 | SUNLU PETG | 92 | PETG | 240-260 °C | 100+ accounts |
| 8 | eSUN 3D PLA+ | 92 | PLA | 210-230 °C | 100+ accounts |
| 9 | Bambu Lab ASA | 87 | ASA | 240-270 °C | 100+ accounts |
| 10 | Bambu Lab PETG Basic | 87 | PETG | 230-260 °C | 100+ accounts |
| 11 | Bambu Lab PLA Metal | 87 | PLA | 190-230 °C | 100+ accounts |
| 12 | ELEGOO PLA | 87 | PLA | 190-220 °C | 500+ accounts |
| 13 | SUNLU PLA | 87 | PLA | 200-240 °C | 500+ accounts |
| 14 | Bambu Lab PLA Silk+ | 84 | PLA | 210-240 °C | 100+ accounts |
| 15 | Bambu Lab PLA Translucent | 84 | PLA | 200-240 °C | 100+ accounts |
1,393 filaments in the running. Compare the top four side by side
What a farm needs from filament
Consistency, then price
A cheaper spool that fails one print in twenty costs more than it saves. Choose on how it prints first, then on the price per kilogram.
Big spools, refills and stock
Fewer spool changes means fewer stops. Check that the line comes on big spools or as refills, and that a shop near you keeps it in stock.
Know what's on every printer
With dozens of printers, the hard part is knowing which spool is where and how much is left. SimplyPrint's filament management tracks every spool and NFC tags identify one with a scan.
How we choose
| What we weigh | Points |
|---|---|
| How many print farms on SimplyPrint run it | 40 |
| Sold by a shop we link to | 15 |
| How many SimplyPrint accounts stock and print it | 10 |
| Big spools or refills | 10 |
| Slicer profiles of its own | 10 |
| Feeds through a multi-material unit | 10 |
| NFC or RFID tags on the maker's spools | 5 |
What SimplyPrint accounts stock and print is counted together across accounts, as of 23 Oct 2026, and only shown from a few accounts up: no account can be told apart. Every other fact is the Open Filament Database's: a filament it has no temperatures for, or no colours, isn't in the running.
The score picks the filaments, one per brand, with one exception: our editor can put a filament first from hands-on experience, and that pick says so.
Some shops pay us a commission when you buy through our links; it never changes a score. Spotted something wrong? Tell us.