-
1 Supported printers
-
2 Select printer
-
3 Flash firmware
-
4 Set up
Put the printer in contact with SimplyPrint
For this final step, we'll generate a settings file for your printer, which must be placed on a USB drive and inserted into the printer.
Beta: This Prusa direct integration is currently in beta with limited support.
We recommend the OctoPrint method with a Raspberry Pi (often one per printer) for the most stable experience, faster connections/downloads and more data. Learn more here.
All support for this beta runs exclusively in our Discord, channel #prusa-integration-beta - we don't offer support for this method anywhere else.
You must select a printer on step 2 to download settings.
After settings download
-
Put the downloaded file on a USB drive
-
Important:
The file must be called "prusa_printer_settings.ini" - if not, rename it!
In case you have downloaded this file multiple times, it may be called something like 'prusa_printer_settings (1).ini'. In that case, remove the '(1)' part.
-
Important:
The file must be called "prusa_printer_settings.ini" - if not, rename it!
- Plug the USB drive into your printer
-
On the printer home screen, click "Settings"
- Go to "Network"
- Go to "SimplyPrint"
- And click "Load Settings"
- Done! Your printer should connect to SimplyPrint momentarily
Setting up multiple Prusa printers?
You can repeat this process for each printer you want to set up. Each printer will need its own settings file downloaded and configured separately.
Thousands complete this setup every week. Follow each step carefully - most issues come from skipping ahead.
That's it! You're all set
You're now ready to connect your printer and start using SimplyPrint.
Create your free account