Skip to main content

Setting up SimplyPrint on Ultimaker S5: SimplyPrint Client method

SimplyPrint Client setup for this printer. Follow the steps to connect your Ultimaker S5 3D printer to SimplyPrint.

Ultimaker S5 image
Back to Ultimaker
  • 1 Introduction
  • 2 Install the client
  • 3 Connect your printer

Connect your printer

The client takes it from here. Open it, then choose Add printer - it finds printers on your network and walks you through connecting yours.

Open the client

First, open the client you installed. You can reach it from:

  • The system tray icon on Windows.
  • The menu-bar icon on macOS.
  • A browser at http://localhost:8000 (or http://<device-ip>:8000 on a Pi or another device).

There is nothing to sign in to in the client itself. Once it is open, add and link your printers below.

  1. Make sure your printer is powered on and on the same network as the device running the client.
  2. In the client, click Add printer and pick your brand. It lists printers it finds on your network, or you can enter the details by hand.
  3. Follow the on-screen steps. Brand-specific prompts (an access code, a serial number, a password, or an "Allow" tap on the printer) appear right in the client.
Finish linking in SimplyPrint

Each printer you add shows up in the client as Pending with a short setup code. Open SimplyPrint, go to your printers, and enter that code to link the printer to your account. That is it, the printer comes online and you can start printing.

What each brand needs
Bambu Lab
One time on the printer, turn on LAN-only mode and Developer Mode. Then enter its IP, 8-character access code, and serial number (all on the printer's screen). Cloud login is monitor-only on current firmware.
Works with: A1, A1 Mini, A2L, H2C, H2D, H2S, P1P, P1S, P2S, X1, X1-Carbon, X1E, X2D.
Creality
Auto-discovered, or enter the printer's IP. The model is detected automatically, no code or password.
Works with: CR-10 SE, Ender-3 V3, Ender-3 V3 KE, Ender-3 V3 Mega, Ender-3 V3 Plus, Ender-3 V4, Ender 5 Max, Hi, K1, K1 Max, K1 SE, K1C, K2, K2 Plus, K2 Pro, K2 SE, K3, SPARKX i7, SPARKX i8.
Anycubic
Auto-discovered, or enter the printer's IP. The model is detected automatically, no code needed.
Works with: Kobra 2 Pro, Kobra 3, Kobra 3 Max, Kobra 3 Max V2 Combo, Kobra 3 V2, Kobra 4, Kobra S1, Kobra S1 Max, Kobra X.
Elegoo
Enter the printer's IP, then pick your model.
Works with: Centauri Carbon, Centauri Carbon 2, Centauri Carbon Canvas.
Snapmaker
Enter the printer's IP, no code or password needed.
Works with: U1.
Flashforge
One time on the printer, turn on LAN-only mode. Then enter its IP and LAN access code (both on the printer's screen).
Works with: AD5X, Adventurer 5M, Adventurer 5M Pro, Creator 5, Creator 5 Pro.
Dremel
Auto-discovered, or enter the printer's IP. No code or password needed.
Works with: 3D40, 3D40-FLX, 3D45.
Ultimaker
Enter the printer's IP, then press Allow on the printer's screen to authorise.
Works with: 2+ Connect, 3, 3 Extended, S3, S5, S7, S7 Pro.
Duet
Enter the board's IP. If you set a Duet Web Control password, enter it; otherwise leave it blank.
Works with: Duet 3 (6HC, 6XD, Mini 5+), Duet 2 (WiFi, Ethernet, Maestro), and other RepRapFirmware boards.
Need help?
Claude Ask Claude ChatGPT Ask ChatGPT Perplexity Ask Perplexity Grok Ask Grok

Thousands complete this setup every week. Follow each step carefully - most issues come from skipping ahead.

Why some setups are tricky: Some manufacturers lock down their printers, requiring workarounds like custom firmware. If hardware is listed as required, there's no shortcut.

About support: Direct setup support is available for Enterprise & School plans. Our AI support bot can help everyone else just as effectively.

Community help: Join our Discord for community support and tips from other users.

Markdown version of this guide - paste into any AI assistant

That's it! You're all set

You're now ready to connect your printer and start using SimplyPrint.

Create your free account
Back

Common Questions

The SimplyPrint Client is a small app, made by us, that you run on a device on your network. It talks to your printers locally and bridges them to SimplyPrint, so you do not have to install anything on the printers themselves. One client can connect many printers across different brands at once.
Bambu Lab, Creality, Anycubic, Elegoo, Snapmaker, Flashforge, Dremel, Ultimaker, and Duet. You pick your brand during setup and follow the connection steps for it.
It depends on the printer. Some brands (such as Creality and Anycubic) can also connect directly on the printer with OctoPrint or Klipper, and you will see both options. The client is the simplest path and works the same across brands. For closed printers like Bambu Lab, the client is the only way in.
No. Mobile devices cannot run the background processes the client needs. Use an actual computer (Raspberry Pi, Mac, Windows, or Linux). Once the client is running, you can of course use phones and tablets to control your printers through the SimplyPrint web and mobile apps.
Yes. The client must be running whenever you want to start prints, monitor remotely, or use SimplyPrint features. If the device is off or asleep, SimplyPrint cannot reach your printer.

Tip: A Raspberry Pi uses very little electricity (about $5-10 per year) and is built to run 24/7.
Yes. A single client can connect many printers on the same network, including a mix of brands.
No. Prints run locally on the printer once files are sent. If the client or your internet connection goes down, an ongoing print keeps going.
No. Your printers only need to be on the same local network as the client. The device running the client does need internet access to reach the SimplyPrint servers.