Setting up SimplyPrint on Creality K1 Max: SimplyPrint Client method

SimplyPrint Client setup for this printer. Follow the steps to connect your Creality K1 Max 3D printer to SimplyPrint.

Creality K1 Max image
Back to SimplyPrint Client
  • 1 Introduction
  • 2 Install the client
  • 3 Connect your printer
SimplyPrint Creality

Connect your Creality printer(s) to SimplyPrint

Bring your Creality printer(s) into SimplyPrint with one small app on a device on your network - across brands, with nothing installed on the printers.

How the client works

The SimplyPrint bridge

No software is installed on your Creality printer - the SimplyPrint Client does the work for it:

  • Our SimplyPrint Client runs on a separate device on your network
  • This device acts as a "bridge" connecting your printer(s) to SimplyPrint
  • It's a wireless setup - no extra cables needed!
Important: The device running the client must remain turned on at all times to maintain the connection to your printers.
What you'll need
  • A device that will remain powered on

    Any computer or device such as a Raspberry Pi that can run the SimplyPrint client

  • Network connection

    The device must be on the same network as your printer(s)

  • Your Creality printer(s)

    Make sure it's powered on and connected to your network

Ready to proceed?

Now that you understand how the client works, let's set up your Creality printer with SimplyPrint.

Next, you'll install the SimplyPrint Client on a device, then connect your printer.

Need help?
Claude Ask Claude ChatGPT Ask ChatGPT Perplexity Ask Perplexity Grok Ask Grok

Thousands complete this setup every week. Follow each step carefully - most issues come from skipping ahead.

Why some setups are tricky: Some manufacturers lock down their printers, requiring workarounds like custom firmware. If hardware is listed as required, there's no shortcut.

About support: Direct setup support is available for Enterprise & School plans. Our AI support bot can help everyone else just as effectively.

Community help: Join our Discord for community support and tips from other users.

Markdown version of this guide - paste into any AI assistant

That's it! You're all set

You're now ready to connect your printer and start using SimplyPrint.

Create your free account
Back Next

Common Questions

The SimplyPrint Client is a small app, made by us, that you run on a device on your network. It talks to your printers locally and bridges them to SimplyPrint, so you do not have to install anything on the printers themselves. One client can connect many printers across different brands at once.
Bambu Lab, Creality, Anycubic, Elegoo, Ultimaker, and Duet. You pick your brand during setup and follow the connection steps for it.
It depends on the printer. Some brands (such as Creality and Anycubic) can also connect directly on the printer with OctoPrint or Klipper, and you will see both options. The client is the simplest path and works the same across brands. For closed printers like Bambu Lab, the client is the only way in.
No. Mobile devices cannot run the background processes the client needs. Use an actual computer (Raspberry Pi, Mac, Windows, or Linux). Once the client is running, you can of course use phones and tablets to control your printers through the SimplyPrint web and mobile apps.
Yes. The client must be running whenever you want to start prints, monitor remotely, or use SimplyPrint features. If the device is off or asleep, SimplyPrint cannot reach your printer.

Tip: A Raspberry Pi uses very little electricity (about $5-10 per year) and is built to run 24/7.
Yes. A single client can connect many printers on the same network, including a mix of brands.
No. Prints run locally on the printer once files are sent. If the client or your internet connection goes down, an ongoing print keeps going.
No. Your printers only need to be on the same local network as the client. The device running the client does need internet access to reach the SimplyPrint servers.