Connect the Flashforge Adventurer 4 Pro to SimplyPrint
Does the Flashforge Adventurer 4 Pro 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd?
Each way of connecting it, what it needs, and how to set it up.
SimplyPrint
Not compatible
Klipper (Moonraker)
Not compatible
Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification
OctoPrint
Directly, over USB
Not compatible
No known way to connect it to SimplyPrint
Unfortunately, the Flashforge Adventurer 4 Pro is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
SimplyPrint custom integration for this specific model
OctoPrint support (requires the printer to support serial printing)
Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
What slicer to use for the Flashforge Adventurer 4 Pro
Use Flashforge's own slicer, Flash Studio / Orca-Flashforge or FlashPrint: none of the slicers in SimplyPrint's cloud has a profile for the Flashforge Adventurer 4 Pro, and it doesn't take standard G-code that we know of.
Flashforge Adventurer 4 Pro specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Size
Build volume
220 x 200 x 250 mm
Bed type
Rectangle
Bed size
220 x 200 mm
Max print height
250 mm
Printing
Max extruder temperature
265 °C
Has heated bed
Yes
Max bed temperature
110 °C
Number of nozzles
1
Direct drive
No
Probing tool / Auto Bed Leveling
Yes
Filament width
1.75 mm
Connecting
Supports serial printing
No
Shipped firmware
The maker's own
Files and slicing
Supported file formats
G-code (.gcode, .gco, .g)
The printer
Printer manufacturer / brand
Flashforge
Printer model name
Adventurer 4 Pro
Made by a company from
China
Launched
July 2023
Disclaimer:
We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Flashforge Adventurer 4 Pro print?
Filament compatibility for the Flashforge Adventurer 4 Pro: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
Filament
Suitability
Notes
PLA
Great
The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG
Great
Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles
With care
Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA
With care
The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA)
With care
Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC)
Not ideal
Not recommended - PC needs very high hotend temps and an enclosed chamber.
Carbon-fiber & glass-filled
With care
Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
The Flashforge Adventurer series
Every Flashforge printer in the series, oldest first.
Printers like the Flashforge Adventurer 4 Pro that work with SimplyPrint
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.
Who makes the Flashforge Adventurer 4 Pro, and how open Flashforge leaves you: whether its printers run without its cloud, take any filament and slicer, and can be repaired. Each area is rated from public sources.
Openness: Mixed (3.0 of 5)
Mixed
Walled gardenOpen
Flashforge (Zhejiang Flashforge 3D Technology) is a Chinese 3D printer maker founded in 2011. It sells the Adventurer 5M and 5M Pro CoreXY printers, the AD5X multi-colour printer and the Creator series, plus resin and wax printers, to customers ranging from hobbyists to businesses.
Founded:
2011 ·
Headquarters:
Zhejiang, China ·
Ownership:
Zhejiang Flashforge 3D Technology Co., Ltd. ·
Website:www.flashforge.com
Flashforge is mixed: the Adventurer 5M runs Klipper with published source and works in a LAN mode with open slicers, but the stock system is closed to modification and its app relies on the cloud.
Firmware and custom firmware ●●●●●
The Adventurer 5M series runs Klipper, and Flashforge published its Klipper source on GitHub under GPL-3.0 in January 2024. The stock system is not built to be modified: the community 'Klipper Mod', which adds Moonraker, Mainsail and Fluidd, is unofficial and warns that it may cost the warranty.
[1][2]
Local control and integrations ●●●●●
A LAN mode lets Orca-Flashforge send jobs on the local network, and USB printing works offline. The Flash Maker app needs internet and a Flashforge account and does not connect in LAN mode. Flashforge documents no local API for other software. Moonraker with Mainsail or Fluidd comes only with the community Klipper Mod, which is unofficial and warns that it may cost the warranty.
[3][4][2]
Third-party filament, slicers and parts ●●●●●
Third-party filament works; Orca-Flashforge is an open-source OrcaSlicer fork and OrcaSlicer itself supports Flashforge printers. Nozzles are sold as complete printer-specific assemblies.
[5][6][7]
Repairs and spare parts ●●●●●
Flashforge sells nozzle, extruder, filament-feeding and touchscreen assemblies for the Adventurer 5M, and its wiki has replacement guides, for example the AD5X extruder board.
[7][8]
Community and documentation ●●●●●
A wiki with manuals, FAQs and maintenance guides, and slicer and Klipper sources on GitHub; much of the advanced use comes from the community mod.
[3][1][2]
Pros
Long-established maker, founded in 2011.
LAN mode and USB printing work without the cloud.
Klipper source and an open-source slicer are published.
Common replacement assemblies are sold for the Adventurer 5M.
Cons
Stock firmware is not meant to be modified; deeper control needs an unofficial community mod.
The Flash Maker app needs internet and an account, and does not work in LAN mode.
Nozzles are sold as complete printer-specific assemblies.
Track record
January 2024: Flashforge published the Klipper source for the Adventurer 5M and 5M Pro on GitHub under GPL-3.0.
[1]
Researched from 10 sources, last checked October 18, 2026. Show sources
Is the Flashforge Adventurer 4 Pro compatible with SimplyPrint?
To our knowledge the Flashforge Adventurer 4 Pro is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the Flashforge Adventurer 4 Pro?
Use Flashforge's own slicer, Flash Studio / Orca-Flashforge or FlashPrint: none of the slicers in SimplyPrint's cloud has a profile for the Flashforge Adventurer 4 Pro, and it doesn't take standard G-code that we know of.
What filament can the Flashforge Adventurer 4 Pro print?
Based on its specs (hotend up to 265C, heated bed up to 110C), the Flashforge Adventurer 4 Pro handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.
What is the Flashforge Adventurer 4 Pro's bed size and build volume?
The Flashforge Adventurer 4 Pro has a 220 x 200 mm print bed and prints up to 250 mm tall, a build volume of about 220 x 200 x 250 mm. See the full specifications table above for bed type, temperatures and more.
When did the Flashforge Adventurer 4 Pro come out?
Flashforge launched the Adventurer 4 Pro in July 2023.
China
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
