The slicer

Slice your models directly in SimplyPrint

Get started for free
Feature image

The SimplyPrint slicer makes 3D printing a breeze

SimplyPrint comes with a built-in slicer that already knows your printer and material. This makes for a slicing experience like no other. The slicer settings are automatically configured for your printer and material.

Feature image

Settings you are used to

The SimplyPrint slicer is a versatile tool that can handle even the biggest projects. The slicer features familiar settings that can be fine-tuned for the best printing quality.

Unlike most other slicers, this one knows the printer you are using as well as the material mounted to it. This means that temperatures, print speeds and retraction is set depending on your printer and material.

Your profiles are stored in the cloud

Never have that perfect slicer profile disappear on you again. All your slicer profiles are tied to your SimplyPrint profile, and will follow you anywhere, on any device. This means that you will get the same slicing experience wherever you are slicing models for your printer.

Feature image
Feature image

Modes for all skill levels

SimplyPrint offers 3 different slicer setting modes:

1. Easy - Just hit one of three buttons to pick between Pretty, Fast, and Strong, and the settings adjust automatically.

2. Simple - Gives you basic control over common settings such as layer height, infill, and support.

3. Advanced - Lets you dig into all the slicer settings, and fine-tune every aspect.

Auto rotate models

With a clever algorithm, SimplyPrint can automatically rotate your model to optimize adhesion to the bed and less wasted material.

Import models from your cloud files

You can upload models either from your own computer or import them from your SimplyPrint files.

Sliced model preview

Check out the 3D preview of your model before sending it to the printer


Start prints directly from the slicer

When you are happy with your model you can start the sliced file on your printer directly from the slicer

Add sliced models to print queue

If you are slicing models for future printing, you can add the sliced model to the queue and start them later

Start prints on multiple printers

SimplyPrint makes sure that it is safe to start the same print on multiple printers at once.

Frequently asked questions

Yes the slicer works just fine on a phone. The interface is hidden away a little bit because of the smaller screen, but all the settings and features are available.
Yes - The slicer supports .STL, .3MF and .OBJ files. If you use 3MF files, the slicer will treat all independent bodies as such and you will be able to manipulate each one separately.
If you are using Cura or Simplify3D you can export your profiles and import them directly to SimplyPrint. Just go to the slicer, click “Profile” > “Import profile” and follow instructions for how to export your Cura and/or Simplify3D profiles.