The best 3D printer for small business use prints the parts you need, in the material they have to be in. It does so without a specialist babysitting it. For most businesses that is no longer an industrial machine: today's enclosed printers print PETG, ABS, ASA and fibre-filled filaments that needed a five-figure printer a few years ago. This guide ranks the printers on sale today for business use, from what our printer catalog knows right now. It weighs materials, reliability, real-world use, reviews, price in your region, and how much each one depends on its maker's cloud. That makes it the best 3D printer for business work of most kinds, from jigs to the best professional 3D printer for a design studio.
Our picks: the best 3D printer for small business in 2026
The best printer for a business overall, then the best for each budget and for engineering materials. Every reason under a printer is read from its data and our assessment of it for business use, and the score is out of 100.
Partnerinformation: Vissa länkar på den här sidan är partnerlänkar. Vi kan få provision om du genomför ett köp, utan extra kostnad för dig. Som Amazon Associate tjänar vi på kvalificerade köp.
Bambu Lab P2S
Kina
The P2S is Bambu Lab's enclosed CoreXY printer and the successor to the P1S, with a 5-inch touchscreen, a quick-swap nozzle, AI failure detection and a 256 mm build cube. It is for anyone who wants an easy, fast printer that handles ABS and ASA as well as PLA and PETG.
- Enclosed with AI failure detection and a wide material range, but it uses Bambu's cloud by default and has no Ethernet.
- 1 000+ skrivare använder SimplyPrint
- Helt inkapslad, så ABS och ASA skrivs ut bra
- Skriver ut PETG, TPU och flexibla material, ABS & ASA, Nylon (PA), Polycarbonate (PC), Kolfiber- och glasfylld och PLA bra
- Recenserad av Tom's Hardware, TechRadar, Wired
- By default it runs through Bambu Lab's own software and cloud, which some organisations' compliance rules don't allow; with SimplyPrint it can run without them and use SimplyPrint's European cloud, in Bambu Lab's LAN-only mode (with Developer Mode on current firmware, which Bambu Lab doesn't support).
- Multi-colour prints produce a lot of purge waste (TechRadar, Tom's Hardware, Wired).
- Bambu Lab betygsätter ”Mest sluten” på vår öppenhetsskala: se varumärkesanteckningarna nedan
- Bambu Lab har haft motgångar under de senaste tre åren: se varumärkesanteckningarna nedan
Creality K2
Kina
- Helt inkapslad, så ABS och ASA skrivs ut bra
- Skriver ut PETG, TPU och flexibla material, ABS & ASA, Nylon (PA), Polycarbonate (PC) och PLA bra
- 100+ skrivare använder SimplyPrint
- Lanserad augusti 2025
- En inbyggd kamera för att övervaka utskrifter varifrån som helst
- Creality har haft motgångar under de senaste tre åren: se varumärkesanteckningarna nedan
Bambu Lab X2D
Kina
- 250+ skrivare använder SimplyPrint
- Helt inkapslad, så ABS och ASA skrivs ut bra
- Skriver ut PETG, TPU och flexibla material, ABS & ASA, Nylon (PA), Polycarbonate (PC), Kolfiber- och glasfylld och PLA bra
- Recenserad av Tom's Hardware, TechRadar, Notebookcheck
- Lanserad 14 april 2026
- Bambu Lab betygsätter ”Mest sluten” på vår öppenhetsskala: se varumärkesanteckningarna nedan
- Bambu Lab har haft motgångar under de senaste tre åren: se varumärkesanteckningarna nedan
Bambu Lab H2S
Kina
The H2S is Bambu Lab's large, fully enclosed single-nozzle printer: 340 x 320 x 340 mm, a 350 °C hotend and a 65 °C actively heated chamber. It is for makers and small businesses that want big, clean prints in everything from PLA to nylon and PC without paying for the H2D's second nozzle.
- An enclosed, heated-chamber machine for engineering materials with strong reliability reports; the closed Bambu ecosystem is the one compliance question.
- 250+ skrivare använder SimplyPrint
- Helt inkapslad, så ABS och ASA skrivs ut bra
- Skriver ut PETG, TPU och flexibla material, ABS & ASA, Nylon (PA), Polycarbonate (PC), Kolfiber- och glasfylld, Högtemperatur (PEI, PEEK, PEKK) och PLA bra
- Recenserad av Tom's Hardware, TechRadar, CNC Kitchen
- One nozzle means more purge waste on multi-colour prints than the dual-nozzle H2D, and Tom's Hardware sees skipping the second nozzle as a waste.
- Heavy, and CNC Kitchen measured a bed temperature spread of roughly 10 °C.
- Bambu Lab betygsätter ”Mest sluten” på vår öppenhetsskala: se varumärkesanteckningarna nedan
- Bambu Lab har haft motgångar under de senaste tre åren: se varumärkesanteckningarna nedan
/product_photo_md.png?cacheid=6924cc4d28d34)
Sovol SV08 Max (Heat Chamber)
Kina
- Helt inkapslad, så ABS och ASA skrivs ut bra
- Skriver ut PETG, TPU och flexibla material, ABS & ASA, Nylon (PA), Polycarbonate (PC) och PLA bra
- 10+ skrivare använder SimplyPrint
- Lanserad maj 2025
- En stor byggvolym: 500 x 500 x 450 mm
The ranking for business
The top ten for business. Open a printer for its specs, reviews and setup guide, or compare the top four on our printer comparison.
| # | Skrivare | Poäng | Från | Med SimplyPrint | Kapsling | Flerfärg | Varumärkets öppenhet |
|---|---|---|---|---|---|---|---|
| 1 | Bambu Lab P2S 256 x 256 x 256 mm |
83 | $449.00 | Verifierad av SimplyPrint | Helt inkapslad | Tillägg | Mest sluten |
| 2 | Bambu Lab H2S 340 x 320 x 340 mm |
90 | $1,049.00 | Verifierad av SimplyPrint | Helt inkapslad | Tillägg | Mest sluten |
| 3 | Bambu Lab H2D 325 x 320 x 325 mm |
90 | $1,399.00 | Verifierad av SimplyPrint | Helt inkapslad | Inbyggd | Mest sluten |
| 4 | Creality K2 Plus 350 x 350 x 350 mm |
87 | $999.00 | Kompatibel | Helt inkapslad | Tillägg | Mest öppen |
| 5 | Bambu Lab H2C 330 x 320 x 325 mm |
85 | $1,899.00 | Verifierad av SimplyPrint | Helt inkapslad | Inbyggd | Mest sluten |
| 6 | Bambu Lab X2D 256 x 256 x 260 mm |
85 | $589.00 | Verifierad av SimplyPrint | Helt inkapslad | Inbyggd | Mest sluten |
| 7 | QIDI Q2 270 x 270 x 256 mm |
85 | $449.00 | Kompatibel | Helt inkapslad | Tillägg | Mest öppen |
| 8 | Creality K2 Pro 300 x 300 x 300 mm |
84 | $599.00 | Kompatibel | Helt inkapslad | Tillägg | Mest öppen |
| 9 | QIDI Max4 390 x 390 x 340 mm |
82 | $1,049.00 | Kompatibel | Helt inkapslad | Tillägg | Mest öppen |
| 10 | Sovol SV08 Max (Heat Chamber) 500 x 500 x 450 mm |
80 | $1,099.00 | Kompatibel | Helt inkapslad | - | Öppna |
QIDI skickar oss några av sina nya skrivare gratis.
Priserna är de lägsta vi hittat i butiker i din region de senaste två veckorna och ändras ofta. Jämför de fyra bästa sida vid sida
What a business needs from a 3D printer
The materials your parts are made of
The best 3D printer for prototyping prints the material the part will be made in, because prototypes are only useful if they behave like the real part. An enclosed printer with a hot enough hotend prints ABS and ASA; nylon and polycarbonate want more heat and often a heated chamber; carbon- and glass-filled filaments need a hardened nozzle. Each printer's page in our compatibility list shows what it prints well, and why.
Reliability and support
A printer that stops when its one expert is on holiday costs more than it saves. Prefer printers many others run, makers that sell spare parts in your country, and a support channel that answers. Buy two of the same model before one bigger one: one prints while the other is serviced, and a rush job never waits for a repair.
Data, compliance and the cloud
Some printers send every job and every design file through their maker's cloud. For a business that means your designs, and sometimes your customers', pass through a third party. Check where that cloud runs and what it keeps, and whether that fits your data-protection obligations, or choose printers you can run on your own network. Our brand ratings below show how much each maker depends on its own cloud.
From one printer to a fleet
Most companies don't stay at one printer. SimplyPrint runs printers from more than 130 brands in one account, with a shared print queue, users and permissions, approval before a job starts, and maintenance tracking. See what that costs on our pricing page.
Total cost, not the sticker price
The printer is often the smallest part of what it costs. Count filament for prototypes that fail, hardened nozzles for abrasive materials, a dryer for nylon, and the hours someone spends looking after it. A printer that costs more but needs no attention is often the cheaper one by the end of the year.
Before you buy: a checklist
- Print your own part first. Send the maker or a reseller a real file and ask for a sample, or find a review that prints something like it.
- List your materials. Which filaments do your parts need now, and which next year?
- Ask about support. How do you reach the maker, how fast do spare parts arrive, and is there a local reseller?
- Check the data path. Where do your files go when you print, and can you keep them on your own network?
- Plan for the second printer. Will the same model still be on sale next year, and can one account run both?
- Count the people. Who will run it day to day, and who covers when they are away?
Open or walled garden: the brands behind the picks
Some printer makers work like Apple: their printer, slicer, cloud and spare parts work together, on their terms. Others work like Android: open firmware, any slicer, any filament, parts you can buy or print. A closed system can be simpler to buy and support, but your workflow then depends on one company's choices. We rate each brand in six areas from public sources, with a dated record of recalls, layoffs and policy changes.
Sovol
Öppenhet: Öppna (4.3 av 5)
Öppna
Slutet ekosystemÖppna
Sovol
Öppenhet: Öppna (4.3 av 5)Sovol is a Chinese 3D printer maker founded in 2018 that sells low-cost printers and publishes their designs. Its SV08 is a lower-cost derivative of the open-source Voron 2.4, released with its structure, electronics and firmware files, and most current models run Klipper. Its buyers are mainly hobbyists who like to tinker.
Grundat: 2018 · Webbplats: www.sovol3d.com
Sovol is among the most open brands: its printers are standard Klipper machines on open designs, with published files and no cloud. The trade-off is less hand-holding: Tom's Hardware found its larger printer needs experience to tune.
| Firmware och anpassad firmware ●●●●● |
Sovol publishes firmware source on GitHub; for the SV08 under GPL-3.0 together with structure files and motherboard designs. Newer repositories, such as the SV08 Max, carry no licence file. Sovol says damage caused by modified or third-party firmware voids its one-year warranty and that it does not help with modifying the source. [1][2][3] |
| Lokal styrning och integrationer ●●●●● |
The SV08 family runs Klipper with the Mainsail interface on the local network, so other software can use Moonraker's documented API. Tom's Hardware drove the SV08 from Mainsail, listed 'doesn't require the cloud', and found 'vanilla Klipper' on the SV08 Max. We found no Sovol cloud service or account requirement. [5][4][1][11] |
| Filament, slicrar och delar från tredje part ●●●●● |
Built on open designs and Klipper, so any filament can be used; Sovol supplies OrcaSlicer profiles, and Tom's Hardware notes the SV08 also works with Cura or PrusaSlicer using Voron settings and takes Bambu-style nozzles. Hotends and extruders are Sovol parts, sold in its store. [6][1][7] |
| Reparationer och reservdelar ●●●●● |
Sovol's store sells parts per model (hotends, extruders, fans, eMMC modules, heated beds), and the SV08's full CAD and motherboard files are public, so parts can be identified or made. [7][1] |
| Community och dokumentation ●●●●● |
Strong overlap with the Voron community, which Sovol supports with a donation programme, public GitHub repositories and a wiki; Sovol does not give technical help for modifying the source. [8][1][9] |
- Standard Klipper with Mainsail on the local network, no account or cloud.
- SV08 structure, electronics and firmware files are published.
- Spare parts sold per model, and open designs make parts easy to source.
- Low prices for Voron-style machines.
- Damage caused by modified or third-party firmware voids the one-year warranty.
- Sovol does not help with modifying its source code.
- Tom's Hardware found the SV08's default slicer profiles very conservative and says the SV08 Max needs an experienced hand to tune.
- Newer repositories (SV08 Max, Zero) have no licence file.
- juli 2026: Sovol launched the M1D, an open-source IDEX printer with a tool changer, on Kickstarter, where it passed $2.8 million in pledges. [10]
- mars 2024: Sovol released the SV08, a lower-cost derivative of the Voron 2.4, and published its structure, hardware and firmware files on GitHub under GPL-3.0. Sovol says it set up a donation programme with the Voron Design team. [1][8]
Undersökt utifrån 11 källor, senast kontrollerad 18 oktober 2026. Visa källor
- Sovol3d/SV08 on GitHub github.com
- Sovol3d/klipper on GitHub github.com
- Sovol3d/SV08MAX on GitHub github.com
- Sovol SV08 Max review: Monster printer | Tom's Hardware tomshardware.com
- Sovol SV08 Review: A Speedy Voron Tribute | Tom's Hardware tomshardware.com
- Sovol3d/Sovol-OrcaSlicer on GitHub github.com
- FDM Parts | Sovol sovol3d.com
- About Us | Sovol sovol3d.com
- Sovol Wiki wiki.sovol3d.com
- Sovol M1D 3D printer is the first open-source IDEX design with an integrated tool-changer | Tom's Hardware tomshardware.com
- moonraker.readthedocs.io
I den här guiden: Sovol SV08 Max (Heat Chamber)
QIDI
Öppenhet: Mest öppen (4.2 av 5)
Mest öppen
Slutet ekosystemÖppna
QIDI
Öppenhet: Mest öppen (4.2 av 5)QIDI Tech is a Chinese 3D printer maker formed in 2014. It sells enclosed, Klipper-based CoreXY printers such as the compact Q2 and the larger Plus4 and Max4, and develops the open-source QIDI Studio slicer and the QIDI Link app.
Grundat: 2014 · Webbplats: qidi3d.com
QIDI is mostly open: its printers are standard Klipper machines you can run fully on the local network, with published source and plenty of spare parts. The phone app and the store-only privacy policy are the weak spots.
| Firmware och anpassad firmware ●●●●● |
QIDI printers run QIDI's editions of Klipper and Moonraker with Fluidd. QIDI publishes them and per-model firmware packages on GitHub under GPL (for example the Q2 in January 2026 and the Max4 in August 2026) and answers issues there. [1][2][3] |
| Lokal styrning och integrationer ●●●●● |
QIDI printers run Klipper and Moonraker with Fluidd on the printer, and QIDI Studio connects to them on the local network by IP without an account. QIDI publishes its Moonraker edition on GitHub, and other software can use Moonraker's documented API. Only the QIDI Link phone app needs an account and QIDI's cloud. [4][5][11][12] |
| Filament, slicrar och delar från tredje part ●●●●● |
Third-party filament works; QIDI Studio is open source, and as Klipper and Moonraker printers they work with other Moonraker-compatible software. Hotends and nozzles are QIDI parts made per model. [6][1][7] |
| Reparationer och reservdelar ●●●●● |
QIDI's store lists many individual parts, including motherboards, eMMC modules, fans, extruders, hotends and Wi-Fi cards, and its wiki has replacement guides such as the Plus4 hotend. [7][8] |
| Data och integritet ●●●●● |
Local use needs no account. QIDI Link requires one and says which server it uses (Aliyun in China, AWS elsewhere). The published privacy policy covers the online store, not the printers or the app. [5][9] |
| Community och dokumentation ●●●●● |
Firmware is released and issues are taken on GitHub, and QIDI keeps a wiki per model with manuals, maintenance and troubleshooting guides. [1][4] |
- QIDI is one of the few printer makers we work with directly: they occasionally send us new printers, and put us in touch with their developers when we need them.
- Runs fully on the local network through Fluidd, with no account needed.
- Klipper and Moonraker sources and firmware updates are published on GitHub.
- Many individual spare parts, down to motherboards and eMMC modules.
- Open-source slicer and open filament choice.
- The QIDI Link app needs an account and QIDI's cloud.
- The privacy policy covers only the online store, not the printers or app.
- Hotends and nozzles are QIDI-specific parts.
- augusti 2026: QIDI published the firmware repository for the Max4 on GitHub under GPL-3.0. [2]
- januari 2026: QIDI published the Q2's Klipper-based firmware on GitHub under GPL-3.0, with update packages and an issue tracker. [1]
Undersökt utifrån 12 källor, senast kontrollerad 18 oktober 2026. Visa källor
- QIDITECH/QIDI_Q2 on GitHub github.com
- QIDITECH/QIDI_MAX4 on GitHub github.com
- QIDITECH/klipper on GitHub github.com
- Connect device and Fluidd | QIDI Wiki wiki.qidi3d.com
- QIDI Link | QIDI Wiki wiki.qidi3d.com
- QIDITECH/QIDIStudio on GitHub github.com
- Accessories | QIDI Online Store qidi3d.com
- PLUS4 Replace Hot End | QIDI Wiki wiki.qidi3d.com
- Privacy policy | QIDI Online Store qidi3d.com
- QIDI | 3D Printer Manufacturer Since 2014 qidi3d.com
- github.com
- moonraker.readthedocs.io
Creality
Öppenhet: Mest öppen (3.6 av 5)
Mest öppen
Slutet ekosystemÖppna
Creality
Öppenhet: Mest öppen (3.6 av 5)Creality is a Shenzhen 3D printer maker founded in 2014. Its low-cost Ender series, launched in 2017, made desktop 3D printing affordable for many hobbyists. It now sells Klipper-based K-series CoreXY printers, Ender and CR open-frame printers, the Hi and SPARKX beginner lines, the CFS multi-material system, 3D scanners and laser engravers, and runs the Creality Cloud model platform. It listed on the Hong Kong Stock Exchange in 2026.
Grundat: 2014 · Huvudkontor: Shenzhen, China · Ägande: Listed on the Hong Kong Stock Exchange (3388.HK) since 2026; founder Jack Chen is chief executive · Webbplats: www.creality.com
Creality sits in the middle: its Klipper-based printers can be run locally with Fluidd and open slicers, and it publishes firmware source, but usually months after launch, and it dropped root access on its 2025 K1 revisions.
| Firmware och anpassad firmware ●●●●● |
Creality publishes Klipper firmware source for the K1, K2, Hi and Ender-3 V3 KE on GitHub under GPL, but after launch: the K1 source came about three months after the series launched in May 2023, the K2 and Hi sources in September 2025. Earlier K1 printers have an official root option with a published guide, but Creality's wiki says the 2025 K1C and K1 Max do not support root access. [1][2][3][4][5] |
| Lokal styrning och integrationer ●●●●● |
Creality Print sends jobs over the local network with no account, and Creality Cloud is optional. The K2 series and Ender-3 V3 serve Fluidd on the printer, so other software can use Klipper's documented Moonraker API. On the K1 series, Creality's firmware notes treat Fluidd and Mainsail as add-ons owners install themselves, and Creality says the 2025 K1C and K1 Max do not support root access. The SPARKX i7 is set up through the Creality Cloud app. [6][20][7][21][4][8][22] |
| Filament, slicrar och delar från tredje part ●●●●● |
Third-party filament works; Creality Print is an open-source (AGPL-3.0) slicer and OrcaSlicer supports Creality printers. Creality sells nozzle, hotend and extruder kits per model; newer K2 parts such as its nozzle kit are Creality designs. [10][11][12] |
| Reparationer och reservdelar ●●●●● |
Creality's store sells extruder, hotend, heating-block and print-head kits per model, and its wiki has parts lists and replacement guides for current printers (for example the K2 Plus and SPARKX i7 hotends). [12][13][14] |
| Data och integritet ●●●●● |
Local printing needs no account; Creality Cloud and its app need one. Creality's published privacy policy is written for its websites and services, allows use of data for targeted advertising, and says little about printer data or where it is stored. [15][6] |
| Community och dokumentation ●●●●● |
One of the largest user bases (second in consumer 3D printers by 2025 sales value, per figures in its listing), a public wiki with model-specific guides, firmware and slicer sources on GitHub, and an official forum. [16][10][6] |
- Klipper-based models can be run entirely on the local network through Fluidd, without an account.
- Firmware for most current models and the Creality Print slicer are published as source on GitHub.
- Wide range, from budget Ender printers to multi-colour K2 machines.
- Spare-part kits and model-specific replacement guides are easy to find.
- Very large user base, so community help is easy to find.
- Firmware source has usually appeared months after a model ships.
- Root access, offered on earlier K1 printers, is not supported on the 2025 K1C and K1 Max.
- The privacy policy says little about printer and cloud data.
- The SPARKX line is built around the Creality Cloud app and an account.
- maj 2026: Creality listed on the Main Board of the Hong Kong Stock Exchange (3388.HK), raising about HK$1.27 billion net. Its prospectus showed 2025 revenue of RMB 3.13 billion and a net loss of RMB 182.4 million, after a profit in 2024. [16][5]
- november 2025: Creality's wiki states that the 2025 revisions of the K1C and K1 Max do not support root access, which earlier K1 printers offered through an official option and guide. [4][17][3]
- september 2025: Creality published the Klipper source for its K2 series and for the Hi on GitHub under GPL-3.0. [2][18]
- augusti 2023: About three months after the K1 series launched, Creality published its K1 Klipper source on GitHub, followed by a repository with a root guide and Fluidd and Mainsail install instructions. [1][3][5]
Undersökt utifrån 22 källor, senast kontrollerad 18 oktober 2026. Visa källor
- CrealityOfficial/K1_Series_Klipper on GitHub github.com
- CrealityOfficial/K2_Series_Klipper on GitHub github.com
- CrealityOfficial/K1_Series_Annex on GitHub github.com
- Root Disclaimer and Risk Warning | Creality Wiki wiki.creality.com
- New Creality IPO Prospectus Shows Record Revenue Alongside Competitive Pressure - 3D Printing Industry 3dprintingindustry.com
- LAN printing | Creality Wiki wiki.creality.com
- How To Control The Ender-3 V3 Using Fluidd Over A Local Area Network | Creality Wiki wiki.creality.com
- SPARKX i7: One-click printing with the Creality Cloud APP | Creality Wiki wiki.creality.com
- SPARKX i7: How to Print Using a USB Drive | Creality Wiki wiki.creality.com
- CrealityOfficial/CrealityPrint on GitHub github.com
- OrcaSlicer/OrcaSlicer on GitHub github.com
- 3D Printer Accessories | Creality Printer Upgrades & Parts store.creality.com
- Replace K2 Plus Hotend | Creality Wiki wiki.creality.com
- i7 Series Quick-Release Hotend Replacement Guide | Creality Wiki wiki.creality.com
- Privacy Policy | Creality creality.com
- Oversubscribed Creality IPO raises $177M, valuing desktop 3D printing company at $1.12 billion - 3D Printing Industry 3dprintingindustry.com
- Creality Root Disclaimer Explained: Risks, Impact, and 2025 K1 Changes | Makers101 makers101.com
- CrealityOfficial/Hi_Klipper on GitHub github.com
- About Us | Creality Official creality.com
- wiki.creality.com
- wiki.creality.com
- moonraker.readthedocs.io
I den här guiden: Creality K2, Creality K2 Plus, Creality K2 Pro
Bambu Lab
Öppenhet: Mest sluten (2.3 av 5)
Mest sluten
Slutet ekosystemÖppna
Bambu Lab
Öppenhet: Mest sluten (2.3 av 5)Bambu Lab is a Shenzhen company founded in 2020 by former DJI engineers. It makes FDM printers in four families (A, P, X and H), the AMS multi-material units, the Bambu Studio slicer, the Bambu Handy app and the MakerWorld model site, and designs them to be used together. Its printers are used by beginners, hobbyists, schools and print farms.
Grundat: 2020 · Huvudkontor: Shenzhen, China · Ägande: Privately held; founded by CEO Ye Tao and other former DJI staff, with venture investors (BGR, 2026) · Webbplats: bambulab.com
Bambu Lab works like Apple: printer, slicer, app, cloud and multi-material system come from one company and are made to work together. Filament and slicer choice stay open, but the firmware is closed and signed, and since 2025 third-party control needs Bambu Connect or the unsupported Developer Mode.
| Firmware och anpassad firmware ●●●●● |
The printer firmware is Bambu's own and closed; in 2022 Bambu said it would keep it in-house. Its security white paper describes secure boot that only runs verified firmware on X1, H2, P1 and A1 printers. Bambu publishes the GPL parts it uses (Linux kernel, U-Boot, BusyBox) but not the printer software. Rooting the X1 only became possible through a security flaw the X1Plus project used in 2024; Bambu then published a one-off rootable X1 firmware for owners who give up their warranty, and blocks rooting in later firmware. [1][2][3][4][22] |
| Lokal styrning och integrationer ●●●●● |
LAN Only mode prints and monitors from Bambu Studio or Bambu Connect without internet or an account; the Handy app, printing from outside the network and print history need Bambu's cloud. Since the 2025 authorization firmware, other software can only read status in normal mode. Full control needs Developer Mode, which cuts the cloud link and which Bambu says it cannot support because the protocols are not official. Bambu documents no local protocol; it offers a file hand-off to Bambu Connect and a Local Server SDK on application. [23][24][6][7][5] |
| Filament, slicrar och delar från tredje part ●●●●● |
Third-party filament works, and Bambu publicly denied in 2025 that it would restrict it. OrcaSlicer and other slicers can be used, but since the 2025 firmware they send and control prints through Bambu Connect or Developer Mode. Hotends are Bambu's own designs, and Bambu says it cannot promise long-term support for accessories that control the printer unless it approved them first. [7][6][4] |
| Reparationer och reservdelar ●●●●● |
Bambu's store sells individual spare parts down to motors, belts, encoders and boards, and its wiki has step-by-step replacement guides for each model (for example the P2S hotend and the H2D/H2C AP board). Many parts, hotends included, are Bambu-specific, so spares come from Bambu. [8][9][10] |
| Data och integritet ●●●●● |
Cloud features need a Bambu account, while LAN Only mode keeps jobs on the local network. Bambu publishes a Trust Center and a 38-page security white paper, says it holds ISO/IEC 27001, ISO/IEC 27701 and TRUSTe certifications, and runs a paid bug bounty. In August 2023 a cloud outage made some printers start earlier jobs on their own; Bambu apologised. [2][11][5][12] |
| Community och dokumentation ●●●●● |
Very large user community, the MakerWorld model site, a detailed wiki and a blog where Bambu explains its policy changes. Bambu Studio is developed in public on GitHub with an open issue tracker. The printer protocol is not documented, and Developer Mode is unsupported. [13][5][7] |
- Printer, slicer, app and AMS come from one company and are designed to work together, which makes a first setup simple.
- Step-by-step repair guides for each model and individual spare parts sold in Bambu's store.
- LAN Only mode works without internet or an account.
- Bambu Studio is open source, and third-party filament works.
- Publishes security certifications and runs a public bug bounty.
- Firmware is closed and signed; current models have no supported way to run custom firmware.
- Since the 2025 firmware, third-party software and accessories need Bambu Connect or the unsupported Developer Mode to control the printer.
- Remote printing, the Handy app and print history depend on Bambu's cloud.
- Hotends and many parts are Bambu-specific, so spares come from Bambu.
- In 2026 a US jury found the X1, P1 and A1 infringe Stratasys patents; Bambu is appealing.
- september 2026: A US federal jury in Texas found that Bambu Lab's X1, P1 and A1 printers infringe Stratasys patents on prime towers and bed levelling, and awarded Stratasys $27.6 million. No injunction was placed on the printers. Bambu told Tom's Hardware it disagrees with the verdict and intends to seek post-trial review and appeal. Stratasys had filed two suits in 2024; more patents are still to be decided. [14]
- maj 2026: Bambu Lab pressed the developer of 'OrcaSlicer-bambulab', a fork that restored direct cloud printing from OrcaSlicer, to remove it, according to Manufactur3D. On 7 May Bambu said the fork impersonated the official Bambu Studio client to its cloud, which its user agreement does not allow, and that modifying and sharing its AGPL code remains fine. The developer disputed the claims. [15][16][17]
- oktober 2025: Bambu Lab opened a Trust Center with a security white paper and listed ISO/IEC 27001, ISO/IEC 27701 and TRUSTe privacy certifications. A year later it said its bug bounty had worked with over 100 researchers and that it had added a public security update log. [2][11]
- 20 januari 2025: After criticism from users and print farms, Bambu Lab announced an optional Developer Mode for X1, P1, A1 and A1 mini that leaves MQTT, FTP and the live stream open for third-party software in LAN mode, without official support. It also said LAN mode via Bambu Connect needs neither internet nor an account, and that third-party filament would not be restricted. [7]
- 16 januari 2025: Bambu Lab announced firmware with 'authorization control', first for the X1: starting prints, moving axes, changing temperatures and binding the printer now require Bambu-approved software, also in LAN mode. On updated printers, third-party slicers and accessories such as the Panda Touch could no longer control the printer except through Bambu Connect; reading status still worked. Bambu cited security and up to 30 million unauthorised cloud requests a day; older firmware stayed optional. [6]
- mars 2024: After the X1Plus jailbreak, Bambu Lab published a one-off rootable firmware for the X1 series for owners who give up their warranty support. It said it does not support X1Plus, and that firmware after it would block rooting again. [4]
- februari 2024: Bambu Lab extended its A1 heatbed-cable callback to a recall of all A1 printers and asked owners to stop using them. It reported electrical faults in under 0.1% of units and offered a full refund plus an $80 voucher, or a redesigned heatbed plus a $120 voucher and six extra months of warranty. The A1 mini was not affected. [18][19]
- januari 2024: Community developers rooted the X1 series through a security flaw in its firmware (up to version 1.07) and released the X1Plus custom firmware. Bambu Lab closed the flaw in later firmware. [22]
- augusti 2023: During a Bambu cloud outage on 15 August 2023, some printers started print jobs without user action, because jobs stuck in the cloud were resent when service returned. Bambu apologised, took responsibility and said it would add checks before a print starts. [12]
- maj 2022: Before its first printers shipped, Bambu Lab said its firmware would stay closed and in-house to remain competitive, and promised to open-source everything if the company ever could not survive. [1]
Undersökt utifrån 24 källor, senast kontrollerad 20 oktober 2026. Visa källor
- To open, or not to open, that is the question blog.bambulab.com
- The Bambu Lab Trust Center for Complete Security and Privacy Transparency blog.bambulab.com
- Open Source Software | Bambu Lab Wiki wiki.bambulab.com
- Custom Firmware Plan and Our Principles on Ecosystem blog.bambulab.com
- How to enable LAN Mode on Bambu Lab printers | Bambu Lab Wiki wiki.bambulab.com
- Firmware Update Introducing New Authorization Control System blog.bambulab.com
- Updates and Third-Party Integration with Bambu Connect blog.bambulab.com
- 3D Printer Parts | Bambu Lab EU Store eu.store.bambulab.com
- Hotend Replacement Guide for the P2S | Bambu Lab Wiki wiki.bambulab.com
- Replace H2D/H2C AP Board | Bambu Lab Wiki wiki.bambulab.com
- One Year On: strengthening IoT Security through Global Certifications and Community Collaboration blog.bambulab.com
- Initial Investigation in the Bambu Cloud Temporary Outage blog.bambulab.com
- bambulab/BambuStudio on GitHub github.com
- Texas jury hits Bambu Lab with $27.6M verdict in Stratasys patent fight | Tom's Hardware tomshardware.com
- Bambu Lab OrcaSlicer controversy escalates | Manufactur3D manufactur3dmag.com
- Setting the record straight on Cloud Access and Community blog.bambulab.com
- jarczakpawel/OrcaSlicer-bambulab on GitHub github.com
- A1 Recall Update blog.bambulab.com
- A1 Heatbed Cable Callback blog.bambulab.com
- Who Owns Bambu Lab, The 3D Printer Manufacturer? | BGR bgr.com
- Bambu Lab A2L - Creative Playground. Extra Large. blog.bambulab.com
- X1Plus: Open Source Bambu Lab X1 Firmware | Hackaday hackaday.com
- wiki.bambulab.com
- wiki.bambulab.com
I den här guiden: Bambu Lab P2S, Bambu Lab X2D, Bambu Lab H2S, Bambu Lab H2D, Bambu Lab H2C
Where they come from, and staying compliant
Most of the best 3D printers today come from Chinese companies, and this ranking reflects that: right now they give you the most printer for the money. That's no judgement of the people who make them. But for some buyers, where a printer comes from matters: your company may have procurement, security or customer requirements about where its equipment comes from and where its data goes.
10 av de 10 bästa skrivarna i den här guiden kommer från ett kinesiskt företag. Här är de högst rankade från EU-företag:
Tjeckien
· Poäng 78 av 100 · $1,999.00
Tjeckien
· Poäng 70 av 100 · $1,299.00
Portugal
· Poäng 49 av 100
Portugal
· Poäng 47 av 100 · $476.10
Any printer, on your terms, with SimplyPrint
Whoever makes your printer, SimplyPrint decides what it talks to:
- Off its maker's cloud. Most printers connect through the SimplyPrint Client on your own network, or in their local-network mode (Bambu Lab's LAN-only mode, with Developer Mode on its newer printers), so they never need their maker's cloud. You can block them from the internet entirely and let only the SimplyPrint Client connect out.
- Your data stored in Europe. SimplyPrint's cloud is hosted in Frankfurt, Germany, under the GDPR. See how we keep it secure and who processes data for us.
- One place for access. Users, permissions, single sign-on and an audit log, for every printer, whatever its brand.
- On your own servers, if you need it. See cloud vs. on-premise.
How we choose
No brand pays for its place in this guide. The ranking is a formula over our catalog, the same for every printer, and it runs again each time the page loads. For business it weighs our assessment, the enclosure, materials and proven compatibility most:
| Vad vi väger in | Poäng | Så mäts det |
|---|---|---|
| Vår bedömning för denna användning | 22 | Vår skriftliga bedömning av skrivaren för den här typen av köpare: utmärkt, bra, okej eller dålig. En skrivare som vi bedömer som dålig för detta utelämnas. Alla skrivare har inte bedömts ännu. För dem utelämnas denna faktor och de andra väger tyngre. |
| Fungerar med SimplyPrint | 13 | Verifierad av SimplyPrint, kompatibel eller förväntas fungera utifrån anslutningssättet. |
| Kapsling | 12 | Helt inbyggd räknas mest, delvis inbyggd hälften. |
| Material den skriver ut bra med | 11 | Hur många typer av filament den skriver ut bra, baserat på temperaturer, kapsling och tillverkarens lista. |
| Hur många som används | 6 | Hur många skrivare av modellen som körs på SimplyPrint, i logaritmisk skala: ett mått på hur många som litar på den. En nyare version räknas som använd av minst hälften så många som den mest använda skrivare den efterträder, så den missgynnas inte för att vara ny. |
| Oberoende recensioner | 6 | Hur många respekterade recensenter från press och YouTube som har recenserat den, upp till fyra. |
| Hur ny den är | 5 | Skrivare som lanserats i år eller förra året räknas fullt, sedan mindre för varje år. En skrivare med en nyare version får inget här. |
| Byggvolym | 5 | Större är bättre, upp till cirka 400 mm på varje sida. |
| Flerfärg och multimaterial | 4 | Om den levereras med eller fungerar med en multimaterialenhet, en verktygsväxlare eller två extrudrar. |
| Inbyggd kamera | 4 | En inbyggd kamera för att övervaka utskrifter och upptäcka fel. |
| Betyg från SimplyPrint-användare | 3 | Vilket betyg SimplyPrint-användare ger den, när de har gjort det. |
| Pris | 3 | Det lägsta aktuella priset i din region, jämfört med de andra i guiden på en logaritmisk skala. Avsaknad av aktuellt pris räknas som lågt. |
| Ethernet | 3 | En Ethernet-port för stabil anslutning i ett belastat nätverk. |
| Varumärkets öppenhet | 3 | Varumärkets plats på vår skala från öppen till sluten, nedan. Ej bedömd räknas som mitten. |
En skrivare ingår i urvalet när den fungerar med SimplyPrint (verifierat, kompatibelt eller förväntat utifrån hur den ansluts), är tillverkarens egen modell och fortfarande säljs: tillverkaren säljer den fortfarande, en butik har ett aktuellt pris eller den lanserades under de senaste 3 åren.
Den här guiden rankar skrivare som kostar upp till US$3,000 i den billigaste butiken. Dyrare skrivare tas inte med om inte vår redaktör väljer dem.
Hur öppen ett varumärke är ger några få poäng, men aldrig tillräckligt för att göra en sämre skrivare bäst. Dess meritlista visas för varje val men ändrar inte poängen: nyheter om ett konto säger ingenting om dess skrivare.
Poängen väljer ut skrivarna, med ett undantag: när vår egen praktiska erfarenhet av en skrivare inte stämmer med dess poäng kan vår redaktör välja ett annat val, och det framgår av valet.
När en nyare version av en skrivare finns i guiden och är känd för att fungera med SimplyPrint, utelämnas den äldre. När den nyare inte finns med, stannar den äldre kvar, får inga poäng för hur ny den är och anger att den har en nyare version.
Några tillverkare skickar skrivare till oss eller samarbetar direkt med oss. När de gör det står det i guiden bredvid deras skrivare.
Har du upptäckt något fel? Berätta för oss så åtgärdar vi det. Kontakta oss
Öppenhetsskalan
Varje märke betygsätts från 1 (slutet) till 5 (öppet) inom sex områden, utifrån offentliga källor som vi listar vid varje betyg. Det sammanlagda betyget är det viktade medelvärdet och placerar märket på en skala från slutet ekosystem till öppet:
| Område | Vikt |
|---|---|
| Firmware och anpassad firmware | 30% |
| Lokal styrning och integrationer | 30% |
| Filament, slicrar och delar från tredje part | 15% |
| Reparationer och reservdelar | 10% |
| Data och integritet | 10% |
| Community och dokumentation | 5% |
Öppna från 4.25 · Mest öppen från 3.50 · Blandat från 2.75 · Mest sluten från 2.00 · Slutet ekosystem under det
Some buying links earn us a commission at no cost to you; they never change the ranking. We make SimplyPrint, which runs printers from every brand here, so "works with SimplyPrint" is one factor: it is the software a business would manage its printers with if it chose to.
Sammanställt idag från vår katalog: 184 skrivare rankade av 230 till salu som fungerar med SimplyPrint. 43 av dem har vår skriftliga bedömning för denna användning. 4 av 4 visade märken har betygsatts för öppenhet.