If you already have access to Mainsail, Fluidd or Moonraker, you can skip this step and continue to the next step.
If you have a Neptune 4 Series, Qidi Tech printer, or another printer with a Makerbase mainboard, your Moonraker version is likely outdated and cannot be easily updated.
You'll need to follow a special setup guide instead of this one.
Read the Makerbase setup guide
If your printer is not affected, continue with the checklist below.
Follow these steps to access Mainsail or Fluidd on your printer:
Make sure your printer is connected to your network.
You need to know where your printer is on your network.
Open your printer's web interface in a browser.
http://192.168.1.100
(example)http://mainsail.local
or http://fluidd.local
Once you have access to your printer's web interface (Mainsail, Fluidd, or Moonraker via SSH), continue to the next step where we'll enable SimplyPrint!
You're now ready to connect your printer and start using SimplyPrint.
Create your free account