The Creator 5 Pro is the enclosed version of Flashforge's four-toolhead tool changer: a 256 mm build cube, 320 °C hotends, an actively heated chamber up to 65 °C and HEPA plus carbon filtration. It is for makers and small businesses that want low-waste multi-colour and multi-material printing including ABS, ASA, nylon and PC.
Finds print quality top-tier across tool changes, and cut a four-colour Benchy's waste from 36 g to 8 g by tuning the prime tower. Cons: only four filaments, long print preparation, high default priming waste, manual filament handling, no nozzle cleaning or official dryer, and purging into the build chamber. Suggests weighing whether a dedicated tool changer is needed.
“The Flashforge Creator 5 Pro is a very good 3D printer—especially, though not exclusively, for complex multi-color or multi-material projects.”
ModBot · 2026年7月25日
Tests both the open Creator 5 and the enclosed Creator 5 Pro with many materials and grew more impressed over time. Nitpicks: buzzing LEDs, a small screen, a heat soak that cannot be skipped and slow per-tool filament loading. Advises the Pro for ABS and ASA and the cheaper Creator 5 for multicolor PLA-type printing.
Flashforge Creator 5 Proを選択するケース
Choose the Creator 5 Pro when you want a tool changer and engineering materials in one machine: ModBot advises it over the open Creator 5 for ABS and ASA, and Notebookcheck rates its print quality top-tier across tool changes. If you only print PLA-type colours, the cheaper Creator 5 does the same job. For engineering materials in one or two colours, an enclosed single-toolhead printer such as the Qidi Plus5 or Bambu Lab H2S avoids the long print preparation and manual per-tool filament handling Notebookcheck noted; it suggests weighing whether you need a dedicated tool changer at all.
メリット
Four toolheads keep waste low: Notebookcheck cut a four-colour Benchy's waste from 36 g to 8 g by tuning the prime tower.
Enclosed with active chamber heating to 65 °C, an H13 HEPA and carbon filter, and door-open detection (Flashforge).
A wide material range: ABS, ASA, PC, nylon, TPU, PETG and carbon-filled PLA (Flashforge), and ModBot found it handled many materials.
Built-in camera, and it works with SimplyPrint through the SimplyPrint Client.
デメリット
Only four filaments, long print preparation and high default priming waste that purges into the build chamber (Notebookcheck).
Filament is handled by hand for each toolhead, with no nozzle cleaning or official dryer (Notebookcheck); ModBot found per-tool loading slow.
A heat soak that can't be skipped, buzzing LEDs and a small screen (ModBot).
New in 2026, so it has a short track record.
おすすめの対象
学校動作する場合あり
Enclosed, filtered and with door detection, and SimplyPrint can hold student prints for approval, but four toolheads loaded by hand and long print preparation ask a lot of a classroom.
ホビーユーザー適しています
Low-waste multi-colour plus ABS and ASA in one machine, at a higher price than the open Creator 5.
企業適しています
A heated, filtered chamber and four materials per print suit functional multi-material parts, though the long preparation slows short jobs.
プリントファーム動作する場合あり
Capable per machine, but manual per-tool filament handling, the mandatory heat soak and its newness weigh on unattended fleets.
Flashforge (Zhejiang Flashforge 3D Technology) is a Chinese 3D printer maker founded in 2011. It sells the Adventurer 5M and 5M Pro CoreXY printers, the AD5X multi-colour printer and the Creator series, plus resin and wax printers, to customers ranging from hobbyists to businesses.
設立:
2011 ·
本社:
Zhejiang, China ·
所有関係:
Zhejiang Flashforge 3D Technology Co., Ltd. ·
ウェブサイト:www.flashforge.com
Flashforge is mixed: the Adventurer 5M runs Klipper with published source and works in a LAN mode with open slicers, but the stock system is closed to modification and its app relies on the cloud.
ファームウェアとカスタムファームウェア ●●●●●
The Adventurer 5M series runs Klipper, and Flashforge published its Klipper source on GitHub under GPL-3.0 in January 2024. The stock system is not built to be modified: the community 'Klipper Mod', which adds Moonraker, Mainsail and Fluidd, is unofficial and warns that it may cost the warranty.
[1][2]
ローカル制御と連携 ●●●●●
A LAN mode lets Orca-Flashforge send jobs on the local network, and USB printing works offline. The Flash Maker app needs internet and a Flashforge account and does not connect in LAN mode. Flashforge documents no local API for other software. Moonraker with Mainsail or Fluidd comes only with the community Klipper Mod, which is unofficial and warns that it may cost the warranty.
[3][4][2]
サードパーティー製フィラメント、スライサー、部品 ●●●●●
Third-party filament works; Orca-Flashforge is an open-source OrcaSlicer fork and OrcaSlicer itself supports Flashforge printers. Nozzles are sold as complete printer-specific assemblies.
[5][6][7]
修理と交換部品 ●●●●●
Flashforge sells nozzle, extruder, filament-feeding and touchscreen assemblies for the Adventurer 5M, and its wiki has replacement guides, for example the AD5X extruder board.
[7][8]
コミュニティとドキュメント ●●●●●
A wiki with manuals, FAQs and maintenance guides, and slicer and Klipper sources on GitHub; much of the advanced use comes from the community mod.
[3][1][2]
メリット
Long-established maker, founded in 2011.
LAN mode and USB printing work without the cloud.
Klipper source and an open-source slicer are published.
Common replacement assemblies are sold for the Adventurer 5M.
デメリット
Stock firmware is not meant to be modified; deeper control needs an unofficial community mod.
The Flash Maker app needs internet and an account, and does not work in LAN mode.
Nozzles are sold as complete printer-specific assemblies.
実績
1月 2024: Flashforge published the Klipper source for the Adventurer 5M and 5M Pro on GitHub under GPL-3.0.
[1]
中国
SimplyPrintクライアント 
PrusaSlicer
BambuStudio
CrealityPrint
Cura
Kiri:Moto
オーストラリア向けFlashforge
カナダ向けFlashforge
EU向けFlashforge
英国向けFlashforge