Setting up SimplyPrint on Anycubic Kobra S1 Combo: Klipper method
Klipper setup for this printer. Follow the steps to connect your Anycubic Kobra S1 Combo 3D printer to SimplyPrint.
If you already have access to Mainsail, Fluidd or Moonraker, you can skip this step and continue to the next step.
If you have a Neptune 4 Series, Qidi Tech printer, or another printer with a Makerbase mainboard, your Moonraker version is likely outdated and cannot be easily updated.
We have dedicated setup guides for these printers:
Elegoo Neptune 4 Qidi Tech Comgrow T300 Other Makerbase printers
If your Makerbase-powered printer is not listed but you can access Mainsail or Fluidd, try continuing with this guide first - the regular setup may still work.
Follow these steps to access Mainsail or Fluidd on your printer:
Make sure your printer is connected to your network.
You need to know where your printer is on your network.
Open your printer's web interface in a browser.
http://192.168.1.100 (example)http://mainsail.local or http://fluidd.localIf you discover in the next step that your Moonraker version is too old (older than v0.8.0) and you can't update it through the web interface, but you do have SSH access to your printer, you can use our SSH setup script as a fallback. This script works on any Klipper printer with SSH access, not just Makerbase-powered ones.
Once you have access to your printer's web interface (Mainsail, Fluidd, or Moonraker via SSH), continue to the next step where we'll enable SimplyPrint!
Thousands complete this setup every week. Follow each step carefully - most issues come from skipping ahead.
You're now ready to connect your printer and start using SimplyPrint.
Create your free account
