The S8 is UltiMaker's fastest dual-material desktop printer, built in Europe with a fully enclosed chamber, an integrated EPA filter and a camera. It is for engineering teams, product developers and schools that want a reliable, easy printer and use UltiMaker's software.
Byggevolumen
330 x 240 x 300 mm
Kabinet
Helt lukket
Maks. printhastighed
500 mm/s
Printer godt
PLA, PETG, TPU og fleksible materialer, ABS & ASA, Nylon (PA), Polycarbonate (PC), Kul- og glasfiberforstærket
Fungerer Ultimaker S8-3D-printeren med SimplyPrint, OctoPrint, Mainsail og Fluidd?
Hver forbindelsesmetode, hvad den kræver, og hvordan den sættes op.
SimplyPrint-klient
Ikke bekræftet endnu, hjælp os med at finde ud af det
The SimplyPrint Client's UltiMaker integration covers the S3, S5 and S7 (local HTTP API). The S6 and S8 run a different firmware that UltiMaker says is not compatible with the S3/S5/S7's; whether its local API is the same is unconfirmed.
Kilde
UltiMaker S-line printers take jobs over the network or from a USB drive; no USB serial printing is documented (the S7's manual shows a host port only).
Kilde
Ultimaker S8-specifikationer: printpladestørrelse, printhøjde og mere
Dens størrelse, temperaturer, multimateriale og forbindelsesmuligheder, baseret på producentens oplysninger og vores egen research.
Læs mere fra producenten
Størrelse
Byggevolumen
330 x 240 x 300 mm
Printpladetype
Rectangle
Printpladestørrelse
330 x 240 mm
Maks. printhøjde
300 mm
Printning
Kabinet
Helt lukket
Maks. printhastighed
500 mm/s
Maksimal extrudertemperatur
340 °C
Har opvarmet bed
Ja
Maks. printpladetemperatur
120 °C
Antal dyser
2
Toolheads
2
Direct drive
Nej
Probing tool / Auto Bed Leveling
Ja
Filamentbredde
2.85 mm
Multimateriale
Toolchanger eller hotend-skifter
Nej
IDEX (uafhængige dobbeltekstrudere)
Nej
Opretter forbindelse
Forbindelse
Wi-Fi, Ethernet, USB
Indbygget kamera
Ja
Understøtter serieprint
Nej
Medfølgende firmware
Producentens egen
Filer og slicing
Understøttede filformater
G-code (.gcode, .gco, .g)
Printeren
Printerproducent / mærke
Ultimaker
Printermodelnavn
S8
Fremstillet af en virksomhed fra
Nederlandene
Lanceret
marts 2025
Produceres stadig
Ja
Ansvarsfraskrivelse:
Vi stræber efter at holde denne information så aktuel og præcis som muligt, men kan ikke garantere dens fuldstændighed eller pålidelighed. Vores data er baseret på brugeres indsendelser og producentreferencer.
Hvilket filament kan Ultimaker S8 printe?
Filamentkompatibilitet for Ultimaker S8: de materialer, Ultimaker angiver til den.
Filament
Egnethed
Noter
PLA
Fantastisk
På producentens materialeliste til denne printer.
PETG
Fantastisk
På producentens materialeliste til denne printer.
TPU og fleksible materialer
Fantastisk
På producentens materialeliste til denne printer.
ABS & ASA
Fantastisk
På producentens materialeliste til denne printer.
Nylon (PA)
Fantastisk
På producentens materialeliste til denne printer.
Polycarbonate (PC)
Fantastisk
På producentens materialeliste til denne printer.
Kul- og glasfiberforstærket
Fantastisk
På producentens materialeliste til denne printer.
Tip: dette er en generel vejledning ud fra printerens specifikationer - tjek altid filamentets anbefalede indstillinger. Med SimplyPrint kan du gemme en profil for hver spole og holde styr på præcis, hvilket filament du har på lager.
Hvornår du skal vælge Ultimaker S8
Choose the S8 when you want a fully enclosed professional dual-extrusion printer and value speed and ease of use over price. The UltiMaker S6 costs less but has only a partly enclosed chamber; the Factor 4 Plus is for heated-chamber production work. The S8 Pro Bundle, which UltiMaker pitches for 24/7 printing, shares this guidance. A confirmed SimplyPrint connection is still missing.
Fordele
Up to 4x the productivity of its predecessor and 500 mm/s travel speed, with print accuracy of 0.15 mm ± 0.15% (UltiMaker); 3Dnatives measured a part in 34 minutes that took just over 2 hours on the S7.
Fully enclosed build chamber with an integrated EPA filter (UltiMaker).
Dual extrusion with high-flow print cores lets you combine two very different materials (UltiMaker).
3Dnatives scored it 9.4/10 and rated ease of use 10/10 (3Dnatives).
Wi-Fi on 2.4 and 5 GHz and Gigabit Ethernet (UltiMaker), and our facts list a built-in camera.
Ulemper
No confirmed way to connect it to SimplyPrint: Klipper is not possible and OctoPrint is unlikely, and our SimplyPrint Client status is unknown.
3Dnatives lists the price (about EUR 8,000) and a slow start to printing as drawbacks; small parts gain least from the speed boost (3Dnatives).
3Dnatives calls it an evolution of the S7: the hardware is nearly unchanged and it ships with two print cores instead of three.
3Dnatives hit a bug that blocked printing with generic-colour filament; UltiMaker fixed it within a few weeks (3Dnatives).
Hvem den passer til
SkolerGodt match
Enclosed with an air filter and very easy to use, but the price is high and no SimplyPrint connection is confirmed.
HobbybrugereIkke et godt match
A professional machine priced well above hobby range.
VirksomhederRigtig godt match
A fast, enclosed, easy dual-material printer with a European build and a good independent score.
PrintfarmeKan fungere
Good for steady production, but we cannot yet connect it to SimplyPrint, so you would run it through UltiMaker's software.
Printere som Ultimaker S8, der fungerer med SimplyPrint
Printere fra samme producent i lignende størrelse, som printer med de samme tekniske materialer eller multimateriale, og som du kan købe i dag, og som vi ved fungerer med SimplyPrint.
Hvem der laver Ultimaker S8, og hvor åben Ultimaker er: om printerne kan køre uden deres cloud, bruge alle filamenter og slicere og repareres. Hvert område vurderes ud fra offentlige kilder.
Åbenhed: Blandet (2.9 ud af 5)
Blandet
Lukket økosystemÅbn
UltiMaker is the company formed in 2022 when the Dutch printer maker Ultimaker, founded in 2011, merged with MakerBot. It sells professional desktop and industrial printers (the S series, Factor 4, MakerBot Method and Sketch) to businesses, engineering teams and schools, and develops the open-source Cura slicer and the Digital Factory cloud platform.
Grundlagt:
2011 ·
Hovedkvarter:
Zaltbommel, Netherlands, and New York, USA ·
Ejerskab:
Privately held; at the 2022 merger NPM Capital held the majority and Stratasys a minority stake ·
Hjemmeside:ultimaker.com
UltiMaker is mixed: Cura and material choice are open, and printers can be used on the local network, but the printer firmware is closed and most management features sit in its Digital Factory cloud.
Firmware og brugerdefineret firmware ●●●●●
The printers' own software is not published: UltiMaker's GitHub has its Linux kernel configuration and Cura, but no printer firmware. We found no documented way to run custom firmware on current S-series or Method printers.
[1][2]
Lokal styring og integrationer ●●●●●
Cura can add an S-series printer on the local network, by discovery or IP, without signing in, and start prints. UltiMaker says most features are only available through its Digital Factory cloud, and the API it documents publicly is that cloud API; we found no public documentation for controlling the printers locally.
[3][12]
Tredjepartsfilament, slicere og dele ●●●●●
Cura is open source and widely used with other brands, and UltiMaker lists over 300 materials, including third-party ones, for the S series. Print cores and the Material Station are UltiMaker's own parts.
[2][4]
Reparationer og reservedele ●●●●●
UltiMaker publishes maintenance schedules for the S series and sells part bundles and maintenance kits, and gives an expected printer lifetime of five years at 1,500 printing hours a year.
[5]
Data og privatliv ●●●●●
Local printing needs no account; Digital Factory needs one. UltiMaker's privacy policy says data is stored and processed in the EEA or the United States depending on the user's region.
[6][3]
Fællesskab og dokumentation ●●●●●
Cura is developed in public on GitHub with a large open issue tracker, and UltiMaker runs a community forum and support knowledge base. Printer internals are not documented publicly.
[2][3]
Fordele
Cura is open source and works with printers from many brands.
Wide material choice on the S series, including third-party materials.
Printers can be used on the local network without an account.
Published maintenance schedules and maintenance kits for long service life.
Ulemper
Printer firmware is closed.
Most fleet and management features need the Digital Factory cloud, with paid tiers.
MakerBot CloudPrint was shut down in 2025, forcing users to move platforms.
Print cores and the Material Station are UltiMaker-only parts.
Dokumenteret erfaring
21. maj 2026: UltiMaker launched the Factor 4 Plus, an industrial printer up to twice as fast as the Factor 4, with TRACE print validation for production and defence customers.
[7]
februar 2026: UltiMaker sold the Thingiverse model platform to MyMiniFactory and archived its Thingiverse forum.
[8]
december 2025: UltiMaker shut down MakerBot CloudPrint in early December 2025. Users had to reconnect printers to Digital Factory, with a free year of its premium tier offered to former CloudPrint users; the Replicator+ cannot be networked in Digital Factory.
[9]
maj 2022: Ultimaker and Stratasys' MakerBot announced a merger backed by $62.4 million from NPM Capital and Stratasys, with co-CEOs from both companies and headquarters in the Netherlands and New York. The combined company took the UltiMaker name.
[10][11]
Baseret på 12 kilder, sidst kontrolleret 18. oktober 2026. Vis kilder
Det ved vi ikke endnu. SimplyPrint virker med 130+ mærker og 600+ modeller via OctoPrint, Klipper og indbyggede integrationer. Har du en Ultimaker S8, fortæller vores kompatibilitetstjek dig med få spørgsmål, hvordan den kan tilsluttes.
Hvilken slicer skal jeg bruge til Ultimaker S8?
Brug Cura, Ultimakers egen slicer, lavet til mærkets printere. Du kan køre den i SimplyPrints online-slicer; der er endnu ingen færdig profil til Ultimaker S8 i den.
Hvilket filament kan Ultimaker S8 printe?
Ultimaker angiver PLA, PETG, ABS & ASA, Nylon (PA), Polycarbonate (PC), TPU og fleksible materialer og Kul- og glasfiberforstærket til S8.
Hvad er Ultimaker S8s printpladestørrelse og byggevolumen?
Ultimaker S8 har en printplade på 330 x 240 mm og kan printe op til 300 mm i højden, med et byggevolumen på cirka 330 x 240 x 300 mm. Se den fulde specifikationstabel ovenfor for printpladetype, temperaturer og mere.
Hvornår udkom Ultimaker S8?
Ultimaker lancerede S8 i marts 2025.
Hvor kan jeg købe Ultimaker S8?
Fra Ultimakers egen butik, som har butikker i USA. Linkene på denne side fører til disse butikker. Nogle er affiliate-links, så vi kan få provision uden ekstra omkostning for dig.
Nederlandene
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Kiri:Moto
Bedst for USA: Ultimakers butik for USA