The Factor 4 Plus is UltiMaker's industrial dual-extrusion printer with an insulated, temperature-controlled chamber, 340 °C print cores and a built-in material station for up to six spools. It is for manufacturing, defence and research teams that need traceable parts and 24/7 running.
Byggevolumen
330 x 240 x 300 mm
Kabinet
Helt lukket
Bevægelsessystem
Andre kinematikker
Printer godt
PLA, PETG, TPU og fleksible materialer, ABS & ASA, Nylon (PA), Polycarbonate (PC), Kul- og glasfiberforstærket
Fungerer Ultimaker Factor 4 Plus-3D-printeren med SimplyPrint, OctoPrint, Mainsail og Fluidd?
Hver forbindelsesmetode, hvad den kræver, og hvordan den sættes op.
SimplyPrint-klient
Ikke bekræftet endnu, hjælp os med at finde ud af det
The SimplyPrint Client's UltiMaker integration covers the S3/S5/S7; nothing confirms the Factor 4 Plus exposes the same local API.
Kilde
Ultimaker Factor 4 Plus-specifikationer: printpladestørrelse, printhøjde og mere
Dens størrelse, temperaturer, multimateriale og forbindelsesmuligheder, baseret på producentens oplysninger og vores egen research.
Læs mere fra producenten
Størrelse
Byggevolumen
330 x 240 x 300 mm
Printpladetype
Rectangle
Printpladestørrelse
330 x 240 mm
Maks. printhøjde
300 mm
Printning
Kabinet
Helt lukket
Bevægelsessystem
Andre kinematikker
Maksimal extrudertemperatur
340 °C
Har opvarmet bed
Ja
Maks. printpladetemperatur
120 °C
Opvarmet kammer
Op til 70 °C
Antal dyser
2
Toolheads
2
Direct drive
Ja
Probing tool / Auto Bed Leveling
Ja
Filamentbredde
2.85 mm
Multimateriale
Toolchanger eller hotend-skifter
Nej
IDEX (uafhængige dobbeltekstrudere)
Nej
Opretter forbindelse
Forbindelse
Wi-Fi, Ethernet, USB
Understøtter serieprint
Nej
Medfølgende firmware
Producentens egen
Filer og slicing
Understøttede filformater
G-code (.gcode, .gco, .g)
Printeren
Printerproducent / mærke
Ultimaker
Printermodelnavn
Factor 4 Plus
Fremstillet af en virksomhed fra
Nederlandene
Lanceret
maj 2026
Produceres stadig
Ja
Ansvarsfraskrivelse:
Vi stræber efter at holde denne information så aktuel og præcis som muligt, men kan ikke garantere dens fuldstændighed eller pålidelighed. Vores data er baseret på brugeres indsendelser og producentreferencer.
Hvilket filament kan Ultimaker Factor 4 Plus printe?
Filamentkompatibilitet for Ultimaker Factor 4 Plus: de materialer, Ultimaker angiver til den.
Filament
Egnethed
Noter
PLA
Fantastisk
På producentens materialeliste til denne printer.
PETG
Fantastisk
På producentens materialeliste til denne printer.
TPU og fleksible materialer
Fantastisk
På producentens materialeliste til denne printer.
ABS & ASA
Fantastisk
På producentens materialeliste til denne printer.
Nylon (PA)
Fantastisk
På producentens materialeliste til denne printer.
Polycarbonate (PC)
Fantastisk
På producentens materialeliste til denne printer.
Kul- og glasfiberforstærket
Fantastisk
På producentens materialeliste til denne printer.
Tip: dette er en generel vejledning ud fra printerens specifikationer - tjek altid filamentets anbefalede indstillinger. Med SimplyPrint kan du gemme en profil for hver spole og holde styr på præcis, hvilket filament du har på lager.
Hvornår du skal vælge Ultimaker Factor 4 Plus
Choose the Factor 4 Plus when you need production repeatability and process logging, such as in-chamber temperatures up to 70 °C and TRACE reports for compliance. For everyday professional work the UltiMaker S8 or S6 cost less, and they share the 330 x 240 x 300 mm build volume. Because there is no confirmed SimplyPrint connection yet, a farm built around SimplyPrint is not the place for it today.
Fordele
Actively temperature-controlled chamber up to 70 °C with a heated bed up to 120 °C and print cores up to 340 °C (UltiMaker).
Automated material handling with low-humidity storage: pre-loading and spool switching for up to six spools (UltiMaker).
UltiMaker TRACE logs extrusion factor, nozzle, chamber and bed temperature for traceability (UltiMaker).
Integrated HEPA filter, emergency stop button and an open-door sensor (UltiMaker).
Direct dual extrusion and a gantry lifetime-tested for 15,000 hours, with a 12-month warranty (UltiMaker).
Ulemper
No confirmed way to connect it to SimplyPrint: Klipper is not possible and OctoPrint is unlikely, and our SimplyPrint Client status is unknown.
Priced by quotation as an industrial machine, and heavy at 120 kg (UltiMaker).
No independent hands-on review found; the claims are UltiMaker's own.
Hvem den passer til
SkolerKan fungere
Enclosed with a door sensor, e-stop and HEPA filter, but it is a heavy industrial machine that suits an engineering lab rather than a general classroom.
HobbybrugereIkke et godt match
Industrial pricing and size far beyond what a hobbyist needs.
VirksomhederRigtig godt match
Built for production with process logging, controlled chamber and a 12-month warranty, though no independent reviews were found.
PrintfarmeKan fungere
Designed for continuous 24/7 work, but we cannot yet connect it to SimplyPrint, so you would run it through UltiMaker's software.
Printere som Ultimaker Factor 4 Plus, der fungerer med SimplyPrint
Printere fra samme producent i lignende størrelse, som printer med de samme tekniske materialer eller multimateriale, og som du kan købe i dag, og som vi ved fungerer med SimplyPrint.
Hvem der laver Ultimaker Factor 4 Plus, og hvor åben Ultimaker er: om printerne kan køre uden deres cloud, bruge alle filamenter og slicere og repareres. Hvert område vurderes ud fra offentlige kilder.
Åbenhed: Blandet (2.9 ud af 5)
Blandet
Lukket økosystemÅbn
UltiMaker is the company formed in 2022 when the Dutch printer maker Ultimaker, founded in 2011, merged with MakerBot. It sells professional desktop and industrial printers (the S series, Factor 4, MakerBot Method and Sketch) to businesses, engineering teams and schools, and develops the open-source Cura slicer and the Digital Factory cloud platform.
Grundlagt:
2011 ·
Hovedkvarter:
Zaltbommel, Netherlands, and New York, USA ·
Ejerskab:
Privately held; at the 2022 merger NPM Capital held the majority and Stratasys a minority stake ·
Hjemmeside:ultimaker.com
UltiMaker is mixed: Cura and material choice are open, and printers can be used on the local network, but the printer firmware is closed and most management features sit in its Digital Factory cloud.
Firmware og brugerdefineret firmware ●●●●●
The printers' own software is not published: UltiMaker's GitHub has its Linux kernel configuration and Cura, but no printer firmware. We found no documented way to run custom firmware on current S-series or Method printers.
[1][2]
Lokal styring og integrationer ●●●●●
Cura can add an S-series printer on the local network, by discovery or IP, without signing in, and start prints. UltiMaker says most features are only available through its Digital Factory cloud, and the API it documents publicly is that cloud API; we found no public documentation for controlling the printers locally.
[3][12]
Tredjepartsfilament, slicere og dele ●●●●●
Cura is open source and widely used with other brands, and UltiMaker lists over 300 materials, including third-party ones, for the S series. Print cores and the Material Station are UltiMaker's own parts.
[2][4]
Reparationer og reservedele ●●●●●
UltiMaker publishes maintenance schedules for the S series and sells part bundles and maintenance kits, and gives an expected printer lifetime of five years at 1,500 printing hours a year.
[5]
Data og privatliv ●●●●●
Local printing needs no account; Digital Factory needs one. UltiMaker's privacy policy says data is stored and processed in the EEA or the United States depending on the user's region.
[6][3]
Fællesskab og dokumentation ●●●●●
Cura is developed in public on GitHub with a large open issue tracker, and UltiMaker runs a community forum and support knowledge base. Printer internals are not documented publicly.
[2][3]
Fordele
Cura is open source and works with printers from many brands.
Wide material choice on the S series, including third-party materials.
Printers can be used on the local network without an account.
Published maintenance schedules and maintenance kits for long service life.
Ulemper
Printer firmware is closed.
Most fleet and management features need the Digital Factory cloud, with paid tiers.
MakerBot CloudPrint was shut down in 2025, forcing users to move platforms.
Print cores and the Material Station are UltiMaker-only parts.
Dokumenteret erfaring
21. maj 2026: UltiMaker launched the Factor 4 Plus, an industrial printer up to twice as fast as the Factor 4, with TRACE print validation for production and defence customers.
[7]
februar 2026: UltiMaker sold the Thingiverse model platform to MyMiniFactory and archived its Thingiverse forum.
[8]
december 2025: UltiMaker shut down MakerBot CloudPrint in early December 2025. Users had to reconnect printers to Digital Factory, with a free year of its premium tier offered to former CloudPrint users; the Replicator+ cannot be networked in Digital Factory.
[9]
maj 2022: Ultimaker and Stratasys' MakerBot announced a merger backed by $62.4 million from NPM Capital and Stratasys, with co-CEOs from both companies and headquarters in the Netherlands and New York. The combined company took the UltiMaker name.
[10][11]
Baseret på 12 kilder, sidst kontrolleret 18. oktober 2026. Vis kilder
Er Ultimaker Factor 4 Plus kompatibel med SimplyPrint?
Det ved vi ikke endnu. SimplyPrint virker med 130+ mærker og 600+ modeller via OctoPrint, Klipper og indbyggede integrationer. Har du en Ultimaker Factor 4 Plus, fortæller vores kompatibilitetstjek dig med få spørgsmål, hvordan den kan tilsluttes.
Hvilken slicer skal jeg bruge til Ultimaker Factor 4 Plus?
Brug Cura, Ultimakers egen slicer, lavet til mærkets printere. Du kan køre den i SimplyPrints online-slicer; der er endnu ingen færdig profil til Ultimaker Factor 4 Plus i den.
Hvilket filament kan Ultimaker Factor 4 Plus printe?
Ultimaker angiver PLA, PETG, ABS & ASA, Nylon (PA), Polycarbonate (PC), TPU og fleksible materialer og Kul- og glasfiberforstærket til Factor 4 Plus.
Hvad er Ultimaker Factor 4 Pluss printpladestørrelse og byggevolumen?
Ultimaker Factor 4 Plus har en printplade på 330 x 240 mm og kan printe op til 300 mm i højden, med et byggevolumen på cirka 330 x 240 x 300 mm. Se den fulde specifikationstabel ovenfor for printpladetype, temperaturer og mere.
Nederlandene
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Kiri:Moto
