The VEHO 1000A is the fully enclosed version of Tronxy's one-metre-cube Klipper printer: 1000 x 1000 x 1000 mm with a 320 °C hotend and 500 mm/s speed. It is for workshops that want to print very large parts, including ABS and ASA, in a closed chamber.
Ships Klipper with Moonraker: KlipperScreen on the touchscreen, Mainsail in the browser at the printer's IP (manual, resonance-compensation section).
ソース
Choose the VEHO 1000A when you want a one-metre build volume with an enclosure so ABS, ASA and nylon behave better; the open VEHO 1000 PRO has the same size without the enclosure and offers an optional two-colour extruder. It is a very large machine with no independent review, so treat it as a project. For smaller parts, the VEHO 4A or a Bambu Lab printer is far easier to live with.
メリット
Fully enclosed with a front door, on a 1000 x 1000 x 1000 mm build volume (Tronxy).
Klipper firmware at up to 500 mm/s, so it works with SimplyPrint through Klipper.
Four independent Z motors, 36-point auto-levelling with single-point independent control, and linear guide rails (Tronxy).
Ceramic-core heating to 320 °C, dual-drive extruder and power-off resume (Tronxy).
Wired or wireless connection, with a 7-inch touchscreen (Tronxy).
デメリット
A very large machine that needs a dedicated room and a lot of filament.
No camera in our facts, which matters for long prints in a closed chamber.
Tronxy gives no chamber heating or temperature spec for the enclosure on its page.
Express and air shipments are priced without import duties and taxes, which the buyer pays at customs; Tronxy lists sea shipments as tax-free, door to door.
No independent hands-on review found.
おすすめの対象
学校適していない
Too big and heavy for a classroom, though enclosed.
ホビーユーザー動作する場合あり
Enclosed large prints in ABS are possible, but it is an expensive, space-hungry project machine.
企業適しています
Large enclosed parts, jigs and prototypes in ABS or ASA, with Klipper for remote management.
プリントファーム適していない
One huge machine rather than many identical ones, and no camera or plate-swap kit in our facts.
Tronxy (Shenzhen Tronxy Technology Co., Ltd) is a Shenzhen 3D printer maker whose founder built the company's first printer in 2013. It sells low- and mid-priced FDM printers, from the X5SA and XY-3 series up to the very large VEHO line (1,000 mm and more), plus Moore clay printers, through its own store, Amazon, eBay, AliExpress, Alibaba and dealers. Buyers are hobbyists, schools and small businesses that want a large build volume for little money.
Mostly open: Marlin source on GitHub, Klipper on the newer large printers, open filament and no cloud. Documentation is thin, and firmware downloads go through an email request.
ファームウェアとカスタムファームウェア ●●●●●
Tronxy publishes Marlin source for its STM32/GD32 boards on GitHub (tronxy3d) under GPL-3.0, covering nearly 30 X5SA, XY, D01 and VEHO 500-800 variants, last updated February 2024. Its newer VEHO PRO and A series ship with Klipper, and it sells a Klipper upgrade kit for the X5SA.
[8][9][6][7]
ローカル制御と連携 ●●●●●
We found no Tronxy cloud service or account. The Klipper VEHO PRO prints from a USB flash drive or over a USB data cable, Wi-Fi or Ethernet, all on your own premises, and Tronxy publishes the Marlin source for its X5SA and XY printers, which host software such as OctoPrint drives over USB.
[7][9][11]
サードパーティー製フィラメント、スライサー、部品 ●●●●●
Open filament (1.75 mm, with 2.85 mm print heads for the VEHO) and standard G-code, which any slicer produces. VEHO hotends and print heads such as the Ext06 are Tronxy's own parts.
[6][7]
修理と交換部品 ●●●●●
Tronxy's store sells model-specific mainboards, hotends, nozzles and extruder kits for current and older lines (X5SA, XY, VEHO), including Klipper-version parts.
[6]
コミュニティとドキュメント ●●●●●
Firmware source and build steps are on GitHub, and upstream Klipper ships configs for eight Tronxy models. Tronxy's own download page asks owners to email for the right firmware instead of offering it directly.
[4][8][10]
メリット
Very large build volumes for the price, up to 1,000 mm and more in the VEHO line.
Marlin source is public on GitHub, and the newer VEHO models run open-source Klipper.
No cloud or account: print over USB, memory card, Wi-Fi or Ethernet.
Spare mainboards, hotends and nozzles sold for current and older models.
デメリット
Firmware on Tronxy's website is by email request rather than a direct download.
Dozens of models and variants with similar names (the published firmware alone covers nearly 30), so check carefully which firmware and parts fit.
VEHO hotends and print heads are Tronxy-specific parts.
実績
10月 2022: Tronxy began publishing Marlin source for its STM32F446/GD32-based boards on GitHub (tronxy3d) under GPL-3.0; it updated it until February 2024.
[8][9]
12月 2020: Tronxy launched the XY-3 SE on Kickstarter; the company says shipping finished in April 2021.
[2]
中国
Klipper (Moonraker) 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
