注意：Simplify3D、ideaMaker、SuperSlicer、KISSlicerなどのスライサーはクラウドに含まれていないため、そのプロファイルは管理していません。Sovol SV08 Max (Heat Chamber)で正常に動作する場合もあります。プロファイルについては、スライサーのドキュメントやフォーラムを確認してください。GitHubのオープンソースのスライサープロファイルデータベースにプロファイルを提供することもできます。
Sovol SV08 Max (Heat Chamber)用アプリ
SovolはSovol SV08 Max (Heat Chamber)用のアプリを提供していません。SimplyPrintをアプリとしてスマートフォンやブラウザーで使用でき、クラウドスライサーも利用できます。
Tested the SV08 Max with the enclosure kit. Finds it fast for its size, with quick eddy-current leveling and good results on TPU and ASA, but loud, with software quirks and a Z-offset that took several failed prints to dial in. Calls it an enthusiast machine that is not for beginners.
“It’s a niche machine, but it fills that niche extremely well.”
Frankly Built · 2026年5月14日
An extended review of the open-frame SV08 Max (about $1,099). Likes it for statues and big props and calls it the best 500 mm printer on the market. Notes a loud idle fan, very long prints, and that it feels a generation behind Bambu or Prusa. Recommends remote monitoring.
Aurora Tech · 2025年6月24日
Sovol sent the unit and sponsored the video (disclosed), tested without the enclosure. Fastest large printer he has tested, with a rigid self-leveling gantry and quick eddy-current leveling. Cons: flow ratio needed manual calibration, one-piece bed, a small 8 GB eMMC, loud even idle.
Sovol SV08 Max (Heat Chamber)のメーカーと、Sovolのプリンターの自由度を紹介します。メーカーのクラウドなしで使えるか、フィラメントやスライサーを自由に選べるか、修理できるかを確認できます。各項目は公開情報に基づいて評価しています。
オープン性：開く（5点中4.3点）
開く
閉鎖的なエコシステム開く
Sovol is a Chinese 3D printer maker founded in 2018 that sells low-cost printers and publishes their designs. Its SV08 is a lower-cost derivative of the open-source Voron 2.4, released with its structure, electronics and firmware files, and most current models run Klipper. Its buyers are mainly hobbyists who like to tinker.
Sovol is among the most open brands: its printers are standard Klipper machines on open designs, with published files and no cloud. The trade-off is less hand-holding: Tom's Hardware found its larger printer needs experience to tune.
ファームウェアとカスタムファームウェア ●●●●●
Sovol publishes firmware source on GitHub; for the SV08 under GPL-3.0 together with structure files and motherboard designs. Newer repositories, such as the SV08 Max, carry no licence file. Sovol says damage caused by modified or third-party firmware voids its one-year warranty and that it does not help with modifying the source.
[1][2][3]
ローカル制御と連携 ●●●●●
The SV08 family runs Klipper with the Mainsail interface on the local network, so other software can use Moonraker's documented API. Tom's Hardware drove the SV08 from Mainsail, listed 'doesn't require the cloud', and found 'vanilla Klipper' on the SV08 Max. We found no Sovol cloud service or account requirement.
[5][4][1][11]
サードパーティー製フィラメント、スライサー、部品 ●●●●●
Built on open designs and Klipper, so any filament can be used; Sovol supplies OrcaSlicer profiles, and Tom's Hardware notes the SV08 also works with Cura or PrusaSlicer using Voron settings and takes Bambu-style nozzles. Hotends and extruders are Sovol parts, sold in its store.
[6][1][7]
修理と交換部品 ●●●●●
Sovol's store sells parts per model (hotends, extruders, fans, eMMC modules, heated beds), and the SV08's full CAD and motherboard files are public, so parts can be identified or made.
[7][1]
コミュニティとドキュメント ●●●●●
Strong overlap with the Voron community, which Sovol supports with a donation programme, public GitHub repositories and a wiki; Sovol does not give technical help for modifying the source.
[8][1][9]
メリット
Standard Klipper with Mainsail on the local network, no account or cloud.
SV08 structure, electronics and firmware files are published.
Spare parts sold per model, and open designs make parts easy to source.
Low prices for Voron-style machines.
デメリット
Damage caused by modified or third-party firmware voids the one-year warranty.
Sovol does not help with modifying its source code.
Tom's Hardware found the SV08's default slicer profiles very conservative and says the SV08 Max needs an experienced hand to tune.
Newer repositories (SV08 Max, Zero) have no licence file.
実績
7月 2026: Sovol launched the M1D, an open-source IDEX printer with a tool changer, on Kickstarter, where it passed $2.8 million in pledges.
[10]
3月 2024: Sovol released the SV08, a lower-cost derivative of the Voron 2.4, and published its structure, hardware and firmware files on GitHub under GPL-3.0. Sovol says it set up a donation programme with the Voron Design team.
[1][8]
中国
/product_photo_md.png?cacheid=6924cc4d28d34)
Klipper (Moonraker) 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
