The CORE One L+ INDX is Prusa's large enclosed CoreXY with a Bondtech INDX toolchanger: up to eight tools, a 298 x 275 x 330 mm volume, a 60 °C chamber and a 300 °C hotend. It is for makers and businesses who want multi-colour and multi-material parts without the purge waste of a single-nozzle system.
Prusa CORE One L+ INDX 3DプリンターはSimplyPrint、OctoPrint、Mainsail、Fluiddに対応していますか？
各接続方法の概要、必要なもの、設定方法です。
SimplyPrintクライアント
動作見込み
PrusaLink is built into Prusa's Buddy firmware, which the SimplyPrint Client connects to, as on the CORE One+ INDX. How the Client handles up to eight tools isn't confirmed yet.
ソース
The CORE One+ INDX runs the same firmware family and is expected to print over USB from OctoPrint. Prusa doesn't document tool changes over USB yet.
ソース
Runs Prusa's Buddy firmware on xBuddy electronics like the CORE One+ INDX, which SimplyPrint's Prusa firmware (beta) supports. Not confirmed on this printer yet.
ソース
注意：Simplify3D、ideaMaker、SuperSlicer、KISSlicerなどのスライサーはクラウドに含まれていないため、そのプロファイルは管理していません。Prusa CORE One L+ INDXで正常に動作する場合もあります。プロファイルについては、スライサーのドキュメントやフォーラムを確認してください。GitHubのオープンソースのスライサープロファイルデータベースにプロファイルを提供することもできます。
Prusa CORE One L+ INDX用アプリ
Prusa CORE One L+ INDXのアプリとしてSimplyPrintを使用できます。スマートフォンやブラウザーから監視・操作し、クラウドでスライスして、他のプリンターと一緒に管理できます。無料で始められます。 Prusaの純正アプリはPrusa appとPrusa Connectです。
Choose the INDX when you want multi-material on a large enclosed machine: Prusa says a tool change takes about 12 seconds and wastes about 0.013 g, and each tool keeps its own nozzle, so TPU and rigid filaments can mix. It is new, ships only assembled, and Prusa's page listed it at €2,779 with estimated delivery after 18 January 2027. The independent reviews Prusa shows are of the CORE One L, not the INDX. If you print one material, the CORE One L+ costs less; for an even larger plate with five toolheads, look at the XL+.
メリット
Up to eight tools, each with its own nozzle, so colour changes waste almost no filament: Prusa says about 0.013 g per change (Prusa).
Tool changes in about 12 seconds, against about 42 for single-nozzle systems, with automatic tool-offset calibration (Prusa).
An enclosed 60 °C chamber and a 300 °C hotend for ASA, PC and nylon (Prusa).
Works with any 1.75 mm filament, and a 1080p camera comes in the box (Prusa).
Expected to work with SimplyPrint through the SimplyPrint Client, OctoPrint or Prusa Direct (not yet confirmed).
デメリット
Listed at €2,779 (€2,223.20 without VAT) for the 8-tool printer, with delivery estimated after 18 January 2027 (Prusa).
No independent review of the INDX yet: the reviews on Prusa's page are of the CORE One L.
The dock reduces the build volume to 298 x 275 x 330 mm from the L+'s 300 x 300 x 330 mm (Prusa).
Sold fully assembled only, with no kit, and SimplyPrint compatibility is expected rather than confirmed.
おすすめの対象
学校動作する場合あり
Enclosed and easy to run, and SimplyPrint can queue student prints for approval, but eight tools and the price are more than a classroom needs.
ホビーユーザー適しています
Low-waste multi-colour on a large enclosed machine, at a premium price.
企業適しています
Multi-material functional parts with TPU and rigid filaments mixed, though it is new and untested by independent reviewers.
プリントファーム動作する場合あり
Low waste per colour print, but it is new, has no plate-clearing kit in our sources and its SimplyPrint connection is not confirmed.
Prusa CORE One L+ INDXのメーカーと、Prusaのプリンターの自由度を紹介します。メーカーのクラウドなしで使えるか、フィラメントやスライサーを自由に選べるか、修理できるかを確認できます。各項目は公開情報に基づいて評価しています。
オープン性：開く（5点中4.9点）
開く
閉鎖的なエコシステム開く
Prusa Research is a Prague company founded in 2012 by Josef Průša, who came from the open-source RepRap project. It designs and builds the Original Prusa and Prusa CORE printers, makes Prusament filament, develops the PrusaSlicer slicer and runs the Printables model site. Printers are built in Prague and at its US site in Delaware, sold assembled or as kits, and used by hobbyists, schools, businesses and print farms.
設立:
2012 ·
本社:
Prague, Czech Republic ·
所有関係:
Prusa Research a.s., founded and led by Josef Průša ·
人:
More than 1,200 people (company site, 2026) ·
ウェブサイト:www.prusa3d.com
Prusa is the most open of the large brands: GPL firmware, an open slicer, full local control without an account and spare parts for everything. Hardware design files now come under Prusa's own Open Community License, which allows personal and in-house business use but not selling machines.
ファームウェアとカスタムファームウェア ●●●●●
Firmware for current printers is published on GitHub under GPL-3.0 and updated with every release. Official firmware is signed, but Prusa documents how to flash custom firmware by breaking a seal on the board and says this does not void the warranty. Prusa says firmware and printable parts are shared right away and electronics schematics later.
[1][2][3]
ローカル制御と連携 ●●●●●
PrusaLink, built into the CORE One, MK4S, MK3.9, MK3.5 and XL, handles monitoring, file uploads and print control on the local network without internet or an account, and printing from USB works offline. Prusa publishes PrusaLink's HTTP API as an OpenAPI specification on GitHub, and its help centre covers OctoPrint setup. Prusa Connect is an optional cloud service for remote access.
[4][15]
サードパーティー製フィラメント、スライサー、部品 ●●●●●
Printers are open to any filament; PrusaSlicer is GPL-licensed and other slicers work. Instead of a locked RFID system, Prusa created OpenPrintTag, an NFC spool-tag standard that is free for any brand to use and works offline.
[5][6]
修理と交換部品 ●●●●●
The e-shop sells spare parts for each printer, printable parts are published, and the full CORE One CAD files are released. Prusa's open-source page says its goal is printers that stay moddable and easy to repair for decades, and its licence explicitly allows making spare parts for your own machines.
[7][3][5]
データとプライバシー ●●●●●
No account is needed for local use through PrusaLink or USB. Prusa Connect needs a Prusa account and stores G-codes and telemetry in the cloud. Prusa Research is an EU company and publishes its privacy policy and a Trust Center.
[4][8]
コミュニティとドキュメント ●●●●●
Large community around Printables and the forum, a detailed knowledge base, and firmware and slicer developed in public on GitHub with open issue trackers.
[1][4]
メリット
GPL firmware with a documented, warranty-safe way to flash custom firmware.
Full control on the local network through PrusaLink, with no account needed.
Spare parts for every printer, published printable parts and released CAD files.
Kits available for people who want to build and understand their printer.
Made in Prague, with a second factory in Delaware for US buyers.
OpenPrintTag is an open spool-tag standard any brand can use.
デメリット
Hardware files use Prusa's own OCL licence, which bars selling machines built from them; it is not an OSI open-source licence.
Electronics schematics are published later than firmware and printable parts.
Remote access and cloud storage need Prusa Connect and an account.
実績
7月 2026: Printed Solid, the Delaware company Prusa Research bought in 2022, was renamed Prusa USA. Its Wilmington site builds the MK4S and CORE One+, makes filament and is Prusa's US service centre.
[9]
12月 2025: Prusa released the full CAD files of the CORE One under its new Open Community License (OCL). OCL allows modifying, sharing mods and in-house commercial use, and grants patent and repair rights, but bars selling machines built from the files without an agreement, so it is not a standard open-source licence. Prusa said it is also filing patents on its designs.
[5]
10月 2025: Prusa launched OpenPrintTag, a published NFC standard for smart filament spools that any brand can use without licence fees, starting with redesigned Prusament spools.
[6]
11月 2024: Prusa announced the CORE One, its first fully enclosed CoreXY printer with active chamber temperature control.
[10]
3月 2023: Josef Průša wrote that open source in 3D printing was under strain from cloners and licence violations. With the MK4, Prusa released firmware sources and models of the plastic parts but held back the electronics plans, planning to publish them later under a new licence.
[11]
チェコ
SimplyPrintクライアント 
OctoPrint 
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
