Markforged's industrial continuous-fiber printer: a 330 x 270 x 200 mm bed, a laser for inspection and bed leveling, and the full range of Markforged fibers. It targets production-floor jigs, fixtures and end-use parts.
Byggevolumen
330 x 270 x 200 mm
Kabinet
Helt lukket
Printer godt
PLA, TPU og fleksible materialer, Nylon (PA), Kul- og glasfiberforstærket
Fungerer Markforged X7-3D-printeren med SimplyPrint, OctoPrint, Mainsail og Fluidd?
Hver forbindelsesmetode, hvad den kræver, og hvordan den sættes op.
Producentens cloud
Muligt, ikke bygget endnu
Cloud-only printer: it prints from Markforged's Eiger platform, which has an API. SimplyPrint can build support through that API if enough people vote for it.
Kilde
Markforged X7-specifikationer: printpladestørrelse, printhøjde og mere
Dens størrelse, temperaturer, multimateriale og forbindelsesmuligheder, baseret på producentens oplysninger og vores egen research.
Læs mere fra producenten
Størrelse
Byggevolumen
330 x 270 x 200 mm
Printpladetype
Rectangle
Printpladestørrelse
330 x 270 mm
Maks. printhøjde
200 mm
Printning
Kabinet
Helt lukket
Maksimal extrudertemperatur
300 °C
Har opvarmet bed
Nej
Antal dyser
1
Toolheads
2
Direct drive
Nej
Probing tool / Auto Bed Leveling
Ja
Filamentbredde
1.75 mm
Multimateriale
Toolchanger eller hotend-skifter
Nej
IDEX (uafhængige dobbeltekstrudere)
Nej
Opretter forbindelse
Forbindelse
Wi-Fi
Understøtter serieprint
Nej
Medfølgende firmware
Producentens egen
Printeren
Printerproducent / mærke
Markforged
Printermodelnavn
X7
Fremstillet af en virksomhed fra
USA
Lanceret
oktober 2016
Produceres stadig
Ja
Ansvarsfraskrivelse:
Vi stræber efter at holde denne information så aktuel og præcis som muligt, men kan ikke garantere dens fuldstændighed eller pålidelighed. Vores data er baseret på brugeres indsendelser og producentreferencer.
Hvilket filament kan Markforged X7 printe?
Filamentkompatibilitet for Markforged X7: de materialer, Markforged angiver til den.
Den printer kun med Markforgeds egne materialer.
Filament
Egnethed
Noter
PLA
Fantastisk
På producentens materialeliste til denne printer.
PETG
Ikke ideelt
Ikke på producentens liste, og denne printer kan kun printe producentens egne materialer.
TPU og fleksible materialer
Fantastisk
På producentens materialeliste til denne printer.
ABS & ASA
Ikke ideelt
Ikke på producentens liste, og denne printer kan kun printe producentens egne materialer.
Nylon (PA)
Fantastisk
På producentens materialeliste til denne printer.
Polycarbonate (PC)
Ikke ideelt
Ikke på producentens liste, og denne printer kan kun printe producentens egne materialer.
Kul- og glasfiberforstærket
Fantastisk
På producentens materialeliste til denne printer.
Tip: dette er en generel vejledning ud fra printerens specifikationer - tjek altid filamentets anbefalede indstillinger. Med SimplyPrint kan du gemme en profil for hver spole og holde styr på præcis, hvilket filament du har på lager.
Hvornår du skal vælge Markforged X7
Choose it when you want continuous carbon fiber, fiberglass or Kevlar parts on a production floor without a heated chamber. The Mark Two is the desktop option but has a smaller bed and manual leveling; the FX10 adds a heated chamber and a larger bed; the FX20 is the one for ULTEM.
Fordele
Laser handles in-process inspection, active calibration and bed leveling.
Prints Onyx, Onyx FR, Onyx ESD, nylon, Precise PLA and Smooth TPU, plus carbon fiber, fiberglass, Kevlar and HSHT fiberglass.
Larger bed than the desktop series: 330 x 270 x 200 mm.
Turbo Print mode is Markforged's fastest, and the Blacksmith adaptive manufacturing option is available only on the X7.
Runs on standard mains power at 150 W and weighs 48 kg.
Ulemper
Not supported by SimplyPrint yet: it can be built on Markforged's cloud API if enough people vote for it.
Runs Markforged's closed firmware with Eiger, so there is no OctoPrint or Klipper route.
No heated chamber, so high-temperature plastics such as ULTEM need the FX20.
Blacksmith is an additional purchase.
Hvem den passer til
SkolerIkke et godt match
Industrial machine tied to Markforged's cloud; the Mark Two is the more sensible desktop pick for teaching.
HobbybrugereIkke et godt match
Built for production use, with closed firmware and no third-party route.
VirksomhederRigtig godt match
Industrial fiber-reinforced printing with inspection and calibration built in.
PrintfarmeKan fungere
Eiger manages fleets of Markforged printers, but SimplyPrint cannot manage the X7 today.
Printere som Markforged X7, der fungerer med SimplyPrint
Printere fra samme producent i lignende størrelse, som printer med de samme tekniske materialer eller multimateriale, og som du kan købe i dag, og som vi ved fungerer med SimplyPrint.
Hvem der laver Markforged X7, og hvor åben Markforged er: om printerne kan køre uden deres cloud, bruge alle filamenter og slicere og repareres. Hvert område vurderes ud fra offentlige kilder.
Åbenhed: Lukket økosystem (1.3 ud af 5)
Lukket økosystem
Lukket økosystemÅbn
Markforged is an American maker of industrial 3D printers, founded in 2013 near Boston, known for nylon parts reinforced with continuous carbon fibre and for metal printing. Printers, materials and its cloud software Eiger are sold together as one closed platform to manufacturers, defence and aerospace. Nano Dimension bought it in April 2025, and in May 2026 agreed to sell it to Stratasys.
Grundlagt:
2013 ·
Hovedkvarter:
Waltham, Massachusetts, US ·
Ejerskab:
Subsidiary of Nano Dimension since April 2025; sale to Stratasys agreed in May 2026, still pending in August 2026 ·
Hjemmeside:markforged.com
Closed by design: proprietary firmware, Markforged-only materials and cloud slicing, for industrial buyers who want one supported, secure system.
Firmware og brugerdefineret firmware ●●●●●
Closed firmware, updated over the air through Eiger; no source is published and no custom firmware is supported.
[2]
Lokal styring og integrationer ●●●●●
Markforged printers are sliced and run through Eiger, its cloud software, by default, and Eiger is the only slicer they accept. Sites that cannot use the cloud can pay for Offline Eiger, which works over USB or a private network. APIs for linking other enterprise systems come with Eiger Fleet, a paid cloud subscription. We found no local interface for other software.
[2][6][16]
Tredjepartsfilament, slicere og dele ●●●●●
Markforged printers use only Markforged materials (Onyx, continuous fibres, metals) and only Eiger for slicing.
[2][3]
Reparationer og reservedele ●●●●●
Replacement print heads, extruders and nozzle parts are sold through Markforged resellers, mostly as assemblies (a Mark Two print head lists at over 1,400 pounds), and some come free under service ('Success') plans.
[13][14]
Data og privatliv ●●●●●
Eiger accounts hold your parts library and print jobs on AWS, encrypted, with two-factor login and ISO 27001 certification, and the privacy policy says what is collected. Offline Eiger keeps the data on site.
[4][5][2][6]
Fordele
Prints parts reinforced with continuous carbon fibre, Kevlar or fibreglass, strong enough to replace some machined parts.
One supported system: printers, materials and software from one company, with ISO 27001 certification.
Offline Eiger available for sites that cannot use the cloud.
The FX10 prints both composites and metal.
Ulemper
Only Markforged materials and the Eiger slicer; no third-party filament.
Cloud first: the offline option is a separate subscription.
Ownership in flux: bought by Nano Dimension in 2025, with a sale to Stratasys pending in 2026.
Layoffs in 2023 and a $25 million patent settlement in 2024.
Dokumenteret erfaring
27. maj 2026: Stratasys agreed to buy MarkForged, Inc. from Nano Dimension for $42.5 million in cash; Nano Dimension keeps the metal binder jetting line. Closing was expected in the second half of 2026, and Stratasys still called it pending in August 2026.
[9][10]
25. april 2025: Nano Dimension completed its acquisition of Markforged, valued at $116 million ($5.00 per share).
[8]
september 2024: Markforged settled Continuous Composites' patent suit, filed in 2021, by agreeing to pay $25 million over four years, with cross-licences; neither side admitted liability.
[11][12]
april 2024: A Delaware jury found that Markforged infringed a Continuous Composites patent on continuous-fibre printing; Markforged attempted to appeal before settling.
[12]
november 2023: Markforged announced a restructuring, mostly an approximately 10% headcount reduction, citing continuing economic headwinds.
[7]
september 2022: Markforged said its Offline Eiger subscription, which runs fully offline, had received a year of quarterly updates with the same materials and features as the cloud version.
[6]
Baseret på 16 kilder, sidst kontrolleret 18. oktober 2026. Vis kilder
Ikke endnu. Producentens software ville gøre det muligt for SimplyPrint at forbinde til Markforged X7, men vi har ikke udviklet det.
Hvilken slicer skal jeg bruge til Markforged X7?
Markforged X7 printer kun fra Markforgeds egen slicer, Eiger, så ingen af slicerne i SimplyPrints cloud kan slice til den.
Hvilket filament kan Markforged X7 printe?
Markforged angiver PLA, TPU og fleksible materialer, Nylon (PA) og Kul- og glasfiberforstærket til X7. Den printer kun med Markforgeds egne materialer.
Hvad er Markforged X7s printpladestørrelse og byggevolumen?
Markforged X7 har en printplade på 330 x 270 mm og kan printe op til 200 mm i højden, med et byggevolumen på cirka 330 x 270 x 200 mm. Se den fulde specifikationstabel ovenfor for printpladetype, temperaturer og mere.
USA
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
