The Markforged FX10 is a 122 kg industrial printer for continuous-fibre composites such as Onyx and Nylon White, and, with a separate Metal Kit, for stainless and tool steel. It is for manufacturers that need strong tooling, fixtures and end-use parts.
Fungerer Markforged FX10-3D-printeren med SimplyPrint, OctoPrint, Mainsail og Fluidd?
Hver forbindelsesmetode, hvad den kræver, og hvordan den sættes op.
Producentens cloud
Muligt, ikke bygget endnu
Cloud-only printer: it prints from Markforged's Eiger platform, which has an API. SimplyPrint can build support through that API if enough people vote for it.
Kilde
Markforged FX10-specifikationer: printpladestørrelse, printhøjde og mere
Dens størrelse, temperaturer, multimateriale og forbindelsesmuligheder, baseret på producentens oplysninger og vores egen research.
Læs mere fra producenten
Størrelse
Byggevolumen
375 x 300 x 300 mm
Printpladetype
Rectangle
Printpladestørrelse
375 x 300 mm
Maks. printhøjde
300 mm
Printning
Kabinet
Helt lukket
Maksimal extrudertemperatur
300 °C
Har opvarmet bed
Ja
Maks. printpladetemperatur
150 °C
Opvarmet kammer
Op til 60 °C
Antal dyser
1
Toolheads
2
Direct drive
Ja
Probing tool / Auto Bed Leveling
Ja
Filamentbredde
1.75 mm
Multimateriale
Toolchanger eller hotend-skifter
Nej
IDEX (uafhængige dobbeltekstrudere)
Nej
Opretter forbindelse
Forbindelse
Wi-Fi, Ethernet
Understøtter serieprint
Nej
Medfølgende firmware
Producentens egen
Printeren
Printerproducent / mærke
Markforged
Printermodelnavn
FX10
Fremstillet af en virksomhed fra
USA
Lanceret
november 2023
Produceres stadig
Ja
Ansvarsfraskrivelse:
Vi stræber efter at holde denne information så aktuel og præcis som muligt, men kan ikke garantere dens fuldstændighed eller pålidelighed. Vores data er baseret på brugeres indsendelser og producentreferencer.
Hvilket filament kan Markforged FX10 printe?
Filamentkompatibilitet for Markforged FX10: de materialer, Markforged angiver til den.
Den printer kun med Markforgeds egne materialer.
Filament
Egnethed
Noter
PLA
Ikke ideelt
Ikke på producentens liste, og denne printer kan kun printe producentens egne materialer.
PETG
Ikke ideelt
Ikke på producentens liste, og denne printer kan kun printe producentens egne materialer.
TPU og fleksible materialer
Ikke ideelt
Ikke på producentens liste, og denne printer kan kun printe producentens egne materialer.
ABS & ASA
Ikke ideelt
Ikke på producentens liste, og denne printer kan kun printe producentens egne materialer.
Nylon (PA)
Fantastisk
På producentens materialeliste til denne printer.
Polycarbonate (PC)
Ikke ideelt
Ikke på producentens liste, og denne printer kan kun printe producentens egne materialer.
Kul- og glasfiberforstærket
Fantastisk
På producentens materialeliste til denne printer.
Tip: dette er en generel vejledning ud fra printerens specifikationer - tjek altid filamentets anbefalede indstillinger. Med SimplyPrint kan du gemme en profil for hver spole og holde styr på præcis, hvilket filament du har på lager.
Hvornår du skal vælge Markforged FX10
Choose the FX10 when you make jigs, fixtures, tooling or end-use parts that need continuous carbon fibre or metal strength, in a factory that is happy to manage printers in Markforged's Eiger software. SimplyPrint cannot run it through Klipper, OctoPrint or the SimplyPrint Client; the maker's cloud is the only route marked possible. For high-temperature polymers such as PEEK and PEI at a far lower price, look at the Prusa Pro HT90.
Fordele
A second nozzle lays continuous carbon fibre into Onyx, Onyx FR, Onyx ESD or Nylon White for what Markforged calls metal-strength parts.
A 375 x 300 x 300 mm volume with a chamber heated to 60 °C and a bed up to 150 °C, so large parts print in one piece.
Low-touch automation: automatic spool changeover, laser-micrometer and vision-based calibration and part inspection, and a build for around-the-clock use (Markforged's claims).
A separately bought Metal Kit swaps the print engine so the same machine prints 17-4 PH and 316L stainless steel and tool steel.
Markforged lists two-factor authentication, encrypted print files, over-the-air updates, and UL, CE and EU Machinery Directive certifications.
Fabbaloo's launch coverage calls it much improved over the Markforged X7 and an impressive machine for industrial production.
Ulemper
Industrial price: Fabbaloo puts a unit at about US$100,000, and metal printing needs the extra Metal Kit plus Wash-1 debinding and a Sinter-2 furnace run of 26 to 31 hours.
SimplyPrint cannot connect to it through Klipper, OctoPrint or the SimplyPrint Client; only the maker's cloud is marked possible.
Slicing and remote management run in Markforged's cloud-based Eiger software, which some organisations' compliance rules don't allow; Markforged lists two-factor authentication and encrypted print files.
Big and heavy: 122 kg and 760 x 640 x 1,200 mm, so it needs floor space, not a desk.
We found no independent hands-on test, so most performance claims are Markforged's own.
Hvem den passer til
SkolerIkke et godt match
A roughly US$100,000, 122 kg industrial machine with cloud software; at most a university research lab, not a classroom.
HobbybrugereIkke et godt match
Priced and sized for factories, and SimplyPrint cannot connect to it.
VirksomhederRigtig godt match
Built for aerospace, automotive and tooling work, with continuous fibre, optional metal, a heated chamber and automated calibration.
PrintfarmeKan fungere
Designed for low-touch production and fleet management in Eiger, but every machine is a six-figure purchase and SimplyPrint cannot run it.
Printere som Markforged FX10, der fungerer med SimplyPrint
Printere fra samme producent i lignende størrelse, som printer med de samme tekniske materialer eller multimateriale, og som du kan købe i dag, og som vi ved fungerer med SimplyPrint.
Hvem der laver Markforged FX10, og hvor åben Markforged er: om printerne kan køre uden deres cloud, bruge alle filamenter og slicere og repareres. Hvert område vurderes ud fra offentlige kilder.
Åbenhed: Lukket økosystem (1.3 ud af 5)
Lukket økosystem
Lukket økosystemÅbn
Markforged is an American maker of industrial 3D printers, founded in 2013 near Boston, known for nylon parts reinforced with continuous carbon fibre and for metal printing. Printers, materials and its cloud software Eiger are sold together as one closed platform to manufacturers, defence and aerospace. Nano Dimension bought it in April 2025, and in May 2026 agreed to sell it to Stratasys.
Grundlagt:
2013 ·
Hovedkvarter:
Waltham, Massachusetts, US ·
Ejerskab:
Subsidiary of Nano Dimension since April 2025; sale to Stratasys agreed in May 2026, still pending in August 2026 ·
Hjemmeside:markforged.com
Closed by design: proprietary firmware, Markforged-only materials and cloud slicing, for industrial buyers who want one supported, secure system.
Firmware og brugerdefineret firmware ●●●●●
Closed firmware, updated over the air through Eiger; no source is published and no custom firmware is supported.
[2]
Lokal styring og integrationer ●●●●●
Markforged printers are sliced and run through Eiger, its cloud software, by default, and Eiger is the only slicer they accept. Sites that cannot use the cloud can pay for Offline Eiger, which works over USB or a private network. APIs for linking other enterprise systems come with Eiger Fleet, a paid cloud subscription. We found no local interface for other software.
[2][6][16]
Tredjepartsfilament, slicere og dele ●●●●●
Markforged printers use only Markforged materials (Onyx, continuous fibres, metals) and only Eiger for slicing.
[2][3]
Reparationer og reservedele ●●●●●
Replacement print heads, extruders and nozzle parts are sold through Markforged resellers, mostly as assemblies (a Mark Two print head lists at over 1,400 pounds), and some come free under service ('Success') plans.
[13][14]
Data og privatliv ●●●●●
Eiger accounts hold your parts library and print jobs on AWS, encrypted, with two-factor login and ISO 27001 certification, and the privacy policy says what is collected. Offline Eiger keeps the data on site.
[4][5][2][6]
Fordele
Prints parts reinforced with continuous carbon fibre, Kevlar or fibreglass, strong enough to replace some machined parts.
One supported system: printers, materials and software from one company, with ISO 27001 certification.
Offline Eiger available for sites that cannot use the cloud.
The FX10 prints both composites and metal.
Ulemper
Only Markforged materials and the Eiger slicer; no third-party filament.
Cloud first: the offline option is a separate subscription.
Ownership in flux: bought by Nano Dimension in 2025, with a sale to Stratasys pending in 2026.
Layoffs in 2023 and a $25 million patent settlement in 2024.
Dokumenteret erfaring
27. maj 2026: Stratasys agreed to buy MarkForged, Inc. from Nano Dimension for $42.5 million in cash; Nano Dimension keeps the metal binder jetting line. Closing was expected in the second half of 2026, and Stratasys still called it pending in August 2026.
[9][10]
25. april 2025: Nano Dimension completed its acquisition of Markforged, valued at $116 million ($5.00 per share).
[8]
september 2024: Markforged settled Continuous Composites' patent suit, filed in 2021, by agreeing to pay $25 million over four years, with cross-licences; neither side admitted liability.
[11][12]
april 2024: A Delaware jury found that Markforged infringed a Continuous Composites patent on continuous-fibre printing; Markforged attempted to appeal before settling.
[12]
november 2023: Markforged announced a restructuring, mostly an approximately 10% headcount reduction, citing continuing economic headwinds.
[7]
september 2022: Markforged said its Offline Eiger subscription, which runs fully offline, had received a year of quarterly updates with the same materials and features as the cloud version.
[6]
Baseret på 16 kilder, sidst kontrolleret 18. oktober 2026. Vis kilder
Ikke endnu. Producentens software ville gøre det muligt for SimplyPrint at forbinde til Markforged FX10, men vi har ikke udviklet det.
Hvilken slicer skal jeg bruge til Markforged FX10?
Markforged FX10 printer kun fra Markforgeds egen slicer, Eiger, så ingen af slicerne i SimplyPrints cloud kan slice til den.
Hvilket filament kan Markforged FX10 printe?
Markforged angiver Nylon (PA) og Kul- og glasfiberforstærket til FX10. Den printer kun med Markforgeds egne materialer.
Hvad er Markforged FX10s printpladestørrelse og byggevolumen?
Markforged FX10 har en printplade på 375 x 300 mm og kan printe op til 300 mm i højden, med et byggevolumen på cirka 375 x 300 x 300 mm. Se den fulde specifikationstabel ovenfor for printpladetype, temperaturer og mere.
USA
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
