Indholdsfortegnelse
Lær alt om specifikationerne for Flashforge Finder 3D printer, om den er kompatibel med OctoPrint, Mainsail, Fluidd og SimplyPrint, og hvordan du opsætter hver af dem.
Printer kompatibilitet for Flashforge Finder
Fungerer Flashforge Finder 3D printer med OctoPrint, Mainsail, Fluidd og SimplyPrint?
At finde ud af, om din specifikke printer fungerer med OctoPrint, Mainsail, Fluidd eller SimplyPrint kan være en udfordrende opgave - især hvis du er ny inden for 3D-print - da der er tusinder af printere derude.
Vi er her for at gøre det lidt lettere for dig ved at besvare spørgsmålet; er Flashforge Finder kompatibel med OctoPrint, Mainsail, Fluidd og SimplyPrint?
Har vi lavet en fejl? Er nogle af disse data forkerte? Lad os det vide!
Ingen nuværende kompatibilitet
Desværre er Flashforge Finder efter vores viden i øjeblikket ikke kompatibel med OctoPrint, Mainsail, Fluidd eller SimplyPrint. Overvej andre 3D printere, der er kompatible med disse software, for den bedste 3D printoplevelse.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
What Slicer to Use for Flashforge Finder
Find the best slicing software for your Flashforge Finder 3D printer.
Compatible Slicers for Flashforge Finder
At SimplyPrint we support the following 3 slicers. But, that does not mean that no other slicers are compatible with this the Flashforge Finder. We are working on adding support for more slicers for our online cloud-based slicer.
No Recommended Slicers Found: To our knowledge, none of the slicers we currently track have built-in default profiles for the Flashforge Finder.
However, the printer can probably still be used with these slicers—you'll just need to create your own custom profiles, for example by basing them on profiles from a similar printer model. It's also possible that this printer works best with another slicer—perhaps one made by Flashforge—that we're not tracking on our website yet.
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Cloud-Based Slicer for Flashforge Finder
Other Compatible Slicers
Note: Many other excellent slicing software options exist, including Cura, Simplify3D, ideaMaker, KISSlicer, and others. While we don't currently track profiles for these slicers in our database, they may work perfectly with your Flashforge Finder. Check each slicer's official documentation or community forums for compatible profiles and settings. You can also contribute profiles to our open-source slicer profile database on GitHub.
Flashforge Finder Printer Specifikationer: Bed Type, Størrelse, Print Højde og Mere
Opdag nøglefunktionerne i Flashforge Finder 3D printermodellen. Fra dens bed type til dens størrelse, print højde og mere, giver vi detaljerede specifikationer for at hjælpe dig med at forstå printerens kapabiliteter.
| Attribut | Værdi |
|---|---|
| Printer model navn | Finder |
| Printerproducent / mærke | Flashforge |
| Printplade type | Square |
| Printplade størrelse | 140 x 140 mm |
| Maks. printhøjde | 140mm |
| Har opvarmet printplade | Nej |
| Maksimal extruder temperatur | 240° |
| Filament diameter | 1.75mm |
| Number of nozzles | 1 |
| Probing tool / Auto Bed Leveling | Nej |
| Direct drive | Ja |
| Supports serial printing | Ja |
| Shipped firmware | Marlin |
| Supported file formats | G-code (.gcode, .gco, .g) |
Har vi lavet en fejl? Er nogle af disse data forkerte? Lad os det vide!
Afsluttende ord
Vi er nået til slutningen af vores informationsguide om Flashforge Finder. Vi bruger betydelig tid på at forske og indsamle data om så mange 3D-printere som muligt, idet vi forstår udfordringen ved at finde omfattende, pålidelige oplysninger ét sted. Vores primære fokus er at give indsigt i kompatibiliteten af specifikke printere med de mest populære 3D printklienter. Vi håber, at denne guide har hjulpet med at besvare dine spørgsmål!