Åpenhet: For det meste åpen (3.6 av 5)
Lukket økosystemÅpne

Creality is a Shenzhen 3D printer maker founded in 2014. Its low-cost Ender series, launched in 2017, made desktop 3D printing affordable for many hobbyists. It now sells Klipper-based K-series CoreXY printers, Ender and CR open-frame printers, the Hi and SPARKX beginner lines, the CFS multi-material system, 3D scanners and laser engravers, and runs the Creality Cloud model platform. It listed on the Hong Kong Stock Exchange in 2026.

Grunnlagt: 2014 · Hovedkontor: Shenzhen, China · Eierskap: Listed on the Hong Kong Stock Exchange (3388.HK) since 2026; founder Jack Chen is chief executive · Nettsted: www.creality.com

Creality sits in the middle: its Klipper-based printers can be run locally with Fluidd and open slicers, and it publishes firmware source, but usually months after launch, and it dropped root access on its 2025 K1 revisions.

Fastvare og tilpasset fastvare
●●●●●		 Creality publishes Klipper firmware source for the K1, K2, Hi and Ender-3 V3 KE on GitHub under GPL, but after launch: the K1 source came about three months after the series launched in May 2023, the K2 and Hi sources in September 2025. Earlier K1 printers have an official root option with a published guide, but Creality's wiki says the 2025 K1C and K1 Max do not support root access. [1][2][3][4][5]
Lokal styring og integrasjoner
●●●●●		 Creality Print sends jobs over the local network with no account, and Creality Cloud is optional. The K2 series and Ender-3 V3 serve Fluidd on the printer, so other software can use Klipper's documented Moonraker API. On the K1 series, Creality's firmware notes treat Fluidd and Mainsail as add-ons owners install themselves, and Creality says the 2025 K1C and K1 Max do not support root access. The SPARKX i7 is set up through the Creality Cloud app. [6][20][7][21][4][8][22]
Filament, slicere og deler fra tredjeparter
●●●●●		 Third-party filament works; Creality Print is an open-source (AGPL-3.0) slicer and OrcaSlicer supports Creality printers. Creality sells nozzle, hotend and extruder kits per model; newer K2 parts such as its nozzle kit are Creality designs. [10][11][12]
Reparasjoner og reservedeler
●●●●●		 Creality's store sells extruder, hotend, heating-block and print-head kits per model, and its wiki has parts lists and replacement guides for current printers (for example the K2 Plus and SPARKX i7 hotends). [12][13][14]
Data og personvern
●●●●●		 Local printing needs no account; Creality Cloud and its app need one. Creality's published privacy policy is written for its websites and services, allows use of data for targeted advertising, and says little about printer data or where it is stored. [15][6]
Fellesskap og dokumentasjon
●●●●●		 One of the largest user bases (second in consumer 3D printers by 2025 sales value, per figures in its listing), a public wiki with model-specific guides, firmware and slicer sources on GitHub, and an official forum. [16][10][6]
Fordeler
  • Klipper-based models can be run entirely on the local network through Fluidd, without an account.
  • Firmware for most current models and the Creality Print slicer are published as source on GitHub.
  • Wide range, from budget Ender printers to multi-colour K2 machines.
  • Spare-part kits and model-specific replacement guides are easy to find.
  • Very large user base, so community help is easy to find.
Ulemper
  • Firmware source has usually appeared months after a model ships.
  • Root access, offered on earlier K1 printers, is not supported on the 2025 K1C and K1 Max.
  • The privacy policy says little about printer and cloud data.
  • The SPARKX line is built around the Creality Cloud app and an account.
Merittliste
  • mai 2026: Creality listed on the Main Board of the Hong Kong Stock Exchange (3388.HK), raising about HK$1.27 billion net. Its prospectus showed 2025 revenue of RMB 3.13 billion and a net loss of RMB 182.4 million, after a profit in 2024. [16][5]
  • november 2025: Creality's wiki states that the 2025 revisions of the K1C and K1 Max do not support root access, which earlier K1 printers offered through an official option and guide. [4][17][3]
  • september 2025: Creality published the Klipper source for its K2 series and for the Hi on GitHub under GPL-3.0. [2][18]
  • august 2023: About three months after the K1 series launched, Creality published its K1 Klipper source on GitHub, followed by a repository with a root guide and Fluidd and Mainsail install instructions. [1][3][5]
Undersøkt fra 22 kilder, sist sjekket 18. oktober 2026. Vis kilder
  1. CrealityOfficial/K1_Series_Klipper on GitHub github.com
  2. CrealityOfficial/K2_Series_Klipper on GitHub github.com
  3. CrealityOfficial/K1_Series_Annex on GitHub github.com
  4. Root Disclaimer and Risk Warning | Creality Wiki wiki.creality.com
  5. New Creality IPO Prospectus Shows Record Revenue Alongside Competitive Pressure - 3D Printing Industry 3dprintingindustry.com
  6. LAN printing | Creality Wiki wiki.creality.com
  7. How To Control The Ender-3 V3 Using Fluidd Over A Local Area Network | Creality Wiki wiki.creality.com
  8. SPARKX i7: One-click printing with the Creality Cloud APP | Creality Wiki wiki.creality.com
  9. SPARKX i7: How to Print Using a USB Drive | Creality Wiki wiki.creality.com
  10. CrealityOfficial/CrealityPrint on GitHub github.com
  11. OrcaSlicer/OrcaSlicer on GitHub github.com
  12. 3D Printer Accessories | Creality Printer Upgrades & Parts store.creality.com
  13. Replace K2 Plus Hotend | Creality Wiki wiki.creality.com
  14. i7 Series Quick-Release Hotend Replacement Guide | Creality Wiki wiki.creality.com
  15. Privacy Policy | Creality creality.com
  16. Oversubscribed Creality IPO raises $177M, valuing desktop 3D printing company at $1.12 billion - 3D Printing Industry 3dprintingindustry.com
  17. Creality Root Disclaimer Explained: Risks, Impact, and 2025 K1 Changes | Makers101 makers101.com
  18. CrealityOfficial/Hi_Klipper on GitHub github.com
  19. About Us | Creality Official creality.com
  20. wiki.creality.com
  21. wiki.creality.com
  22. moonraker.readthedocs.io