The VEHO 800 Pro 2E is the dual-extruder version of Tronxy's open-frame 800 x 800 x 800 mm Klipper printer. It is for makers who want very large two-colour prints.
注意：Simplify3D、ideaMaker、SuperSlicer、KISSlicerなどのスライサーはクラウドに含まれていないため、そのプロファイルは管理していません。Tronxy VEHO 800 Pro 2Eで正常に動作する場合もあります。プロファイルについては、スライサーのドキュメントやフォーラムを確認してください。GitHubのオープンソースのスライサープロファイルデータベースにプロファイルを提供することもできます。
Tronxy VEHO 800 Pro 2E用アプリ
TronxyはTronxy VEHO 800 Pro 2E用のアプリを提供していません。SimplyPrintをアプリとしてスマートフォンやブラウザーで使用でき、クラウドスライサーも利用できます。
Choose the 800 Pro 2E when you want two colours or two materials on one very large part and are happy with an open frame. If you only print one colour the VEHO 800 Pro costs less, and for a closed chamber the VEHO 800A is the choice; for smaller multi-colour work a printer with an automatic filament system is easier to live with.
メリット
Two independently driven extruders for dual-colour printing on an 800 x 800 x 800 mm plate (Tronxy).
Klipper with 100-point auto-leveling and power-off resume (Tronxy).
Works with SimplyPrint through Klipper, with Wi-Fi and Ethernet to connect it.
Seven linear guides, four independent Z motors and filament runout detection (Tronxy).
320 °C hotend and a silicone heated bed (Tronxy and our facts).
デメリット
Open frame, so ABS and other warp-prone materials are hard on a plate this size.
Limited to two colours or materials at a time (Tronxy).
The maker's page lists no built-in camera. Add a camera for remote watching.
Tronxy's page quotes a high-speed print of 80 mm/s, much lower than the 600 mm/s of the single-extruder model, and we found no independent review.
おすすめの対象
学校適していない
Open, very large and hot; two extruders add complexity that a classroom does not need.
ホビーユーザー適しています
Dual-colour printing at a scale few printers reach, if you are fine with an open frame.
企業動作する場合あり
Useful for large two-colour display pieces; no chamber and no independent reliability data.
プリントファーム適していない
A very large dual-extruder machine with no camera is a poor fleet unit.
Tronxy VEHO 800 Pro 2Eのメーカーと、Tronxyのプリンターの自由度を紹介します。メーカーのクラウドなしで使えるか、フィラメントやスライサーを自由に選べるか、修理できるかを確認できます。各項目は公開情報に基づいて評価しています。
オープン性：開く（5点中4.3点）
開く
閉鎖的なエコシステム開く
Tronxy (Shenzhen Tronxy Technology Co., Ltd) is a Shenzhen 3D printer maker whose founder built the company's first printer in 2013. It sells low- and mid-priced FDM printers, from the X5SA and XY-3 series up to the very large VEHO line (1,000 mm and more), plus Moore clay printers, through its own store, Amazon, eBay, AliExpress, Alibaba and dealers. Buyers are hobbyists, schools and small businesses that want a large build volume for little money.
Mostly open: Marlin source on GitHub, Klipper on the newer large printers, open filament and no cloud. Documentation is thin, and firmware downloads go through an email request.
ファームウェアとカスタムファームウェア ●●●●●
Tronxy publishes Marlin source for its STM32/GD32 boards on GitHub (tronxy3d) under GPL-3.0, covering nearly 30 X5SA, XY, D01 and VEHO 500-800 variants, last updated February 2024. Its newer VEHO PRO and A series ship with Klipper, and it sells a Klipper upgrade kit for the X5SA.
[8][9][6][7]
ローカル制御と連携 ●●●●●
We found no Tronxy cloud service or account. The Klipper VEHO PRO prints from a USB flash drive or over a USB data cable, Wi-Fi or Ethernet, all on your own premises, and Tronxy publishes the Marlin source for its X5SA and XY printers, which host software such as OctoPrint drives over USB.
[7][9][11]
サードパーティー製フィラメント、スライサー、部品 ●●●●●
Open filament (1.75 mm, with 2.85 mm print heads for the VEHO) and standard G-code, which any slicer produces. VEHO hotends and print heads such as the Ext06 are Tronxy's own parts.
[6][7]
修理と交換部品 ●●●●●
Tronxy's store sells model-specific mainboards, hotends, nozzles and extruder kits for current and older lines (X5SA, XY, VEHO), including Klipper-version parts.
[6]
コミュニティとドキュメント ●●●●●
Firmware source and build steps are on GitHub, and upstream Klipper ships configs for eight Tronxy models. Tronxy's own download page asks owners to email for the right firmware instead of offering it directly.
[4][8][10]
メリット
Very large build volumes for the price, up to 1,000 mm and more in the VEHO line.
Marlin source is public on GitHub, and the newer VEHO models run open-source Klipper.
No cloud or account: print over USB, memory card, Wi-Fi or Ethernet.
Spare mainboards, hotends and nozzles sold for current and older models.
デメリット
Firmware on Tronxy's website is by email request rather than a direct download.
Dozens of models and variants with similar names (the published firmware alone covers nearly 30), so check carefully which firmware and parts fit.
VEHO hotends and print heads are Tronxy-specific parts.
実績
10月 2022: Tronxy began publishing Marlin source for its STM32F446/GD32-based boards on GitHub (tronxy3d) under GPL-3.0; it updated it until February 2024.
[8][9]
12月 2020: Tronxy launched the XY-3 SE on Kickstarter; the company says shipping finished in April 2021.
[2]
中国
Klipper (Moonraker) 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
