The VEHO 600 Pro V3 is an open-frame Klipper CoreXY printer with a 600 x 600 x 600 mm plate, linear rails and a direct-drive extruder. It is for makers and workshops that need very large parts and do not need an enclosure.
注意：Simplify3D、ideaMaker、SuperSlicer、KISSlicerなどのスライサーはクラウドに含まれていないため、そのプロファイルは管理していません。Tronxy VEHO 600 PRO V3で正常に動作する場合もあります。プロファイルについては、スライサーのドキュメントやフォーラムを確認してください。GitHubのオープンソースのスライサープロファイルデータベースにプロファイルを提供することもできます。
Tronxy VEHO 600 PRO V3用アプリ
TronxyはTronxy VEHO 600 PRO V3用のアプリを提供していません。SimplyPrintをアプリとしてスマートフォンやブラウザーで使用でき、クラウドスライサーも利用できます。
Choose the 600 Pro V3 for large PLA or PETG parts, props and fixtures where build volume matters more than a closed chamber. Tronxy itself points buyers to the enclosed VEHO 600A for stable chamber temperatures; pick the 600A if you print ABS, ASA or nylon, or the VEHO 500 Pro if 500 mm is enough and you want to spend less.
メリット
600 x 600 x 600 mm build volume with a direct-drive extruder and a 300 °C hotend (Tronxy and our facts).
Seven high-precision linear guides (4 Z, 2 Y, 1 X) and four ball screws for a stiff frame (Tronxy).
Automatic belt adjustment on the XY axes and four independent Z motors compensating the plate (Tronxy).
Works with SimplyPrint through Klipper.
7-inch capacitive touchscreen and LED lighting strips (Tronxy).
デメリット
No enclosure, so ABS, ASA and nylon on a plate this size warp easily; Tronxy steers those users to the 600A.
Network connection is by Ethernet, USB or SD card only; the maker's page does not list Wi-Fi.
The maker's page lists no built-in camera. Add a camera for remote watching.
No independent hands-on review found, so the claims here are Tronxy's own.
おすすめの対象
学校適していない
Open frame with a 300 °C hotend and a plate this big is a poor fit for a classroom.
ホビーユーザー適しています
Huge build volume with Klipper and linear rails for tinkerers who want to print big.
企業動作する場合あり
Useful for large prototypes and jigs in PLA or PETG; engineering materials call for the enclosed 600A.
プリントファーム適していない
Too big and too manual for many identical machines, and without a camera or Wi-Fi.
Tronxy VEHO 600 PRO V3のメーカーと、Tronxyのプリンターの自由度を紹介します。メーカーのクラウドなしで使えるか、フィラメントやスライサーを自由に選べるか、修理できるかを確認できます。各項目は公開情報に基づいて評価しています。
オープン性：開く（5点中4.3点）
開く
閉鎖的なエコシステム開く
Tronxy (Shenzhen Tronxy Technology Co., Ltd) is a Shenzhen 3D printer maker whose founder built the company's first printer in 2013. It sells low- and mid-priced FDM printers, from the X5SA and XY-3 series up to the very large VEHO line (1,000 mm and more), plus Moore clay printers, through its own store, Amazon, eBay, AliExpress, Alibaba and dealers. Buyers are hobbyists, schools and small businesses that want a large build volume for little money.
Mostly open: Marlin source on GitHub, Klipper on the newer large printers, open filament and no cloud. Documentation is thin, and firmware downloads go through an email request.
ファームウェアとカスタムファームウェア ●●●●●
Tronxy publishes Marlin source for its STM32/GD32 boards on GitHub (tronxy3d) under GPL-3.0, covering nearly 30 X5SA, XY, D01 and VEHO 500-800 variants, last updated February 2024. Its newer VEHO PRO and A series ship with Klipper, and it sells a Klipper upgrade kit for the X5SA.
[8][9][6][7]
ローカル制御と連携 ●●●●●
We found no Tronxy cloud service or account. The Klipper VEHO PRO prints from a USB flash drive or over a USB data cable, Wi-Fi or Ethernet, all on your own premises, and Tronxy publishes the Marlin source for its X5SA and XY printers, which host software such as OctoPrint drives over USB.
[7][9][11]
サードパーティー製フィラメント、スライサー、部品 ●●●●●
Open filament (1.75 mm, with 2.85 mm print heads for the VEHO) and standard G-code, which any slicer produces. VEHO hotends and print heads such as the Ext06 are Tronxy's own parts.
[6][7]
修理と交換部品 ●●●●●
Tronxy's store sells model-specific mainboards, hotends, nozzles and extruder kits for current and older lines (X5SA, XY, VEHO), including Klipper-version parts.
[6]
コミュニティとドキュメント ●●●●●
Firmware source and build steps are on GitHub, and upstream Klipper ships configs for eight Tronxy models. Tronxy's own download page asks owners to email for the right firmware instead of offering it directly.
[4][8][10]
メリット
Very large build volumes for the price, up to 1,000 mm and more in the VEHO line.
Marlin source is public on GitHub, and the newer VEHO models run open-source Klipper.
No cloud or account: print over USB, memory card, Wi-Fi or Ethernet.
Spare mainboards, hotends and nozzles sold for current and older models.
デメリット
Firmware on Tronxy's website is by email request rather than a direct download.
Dozens of models and variants with similar names (the published firmware alone covers nearly 30), so check carefully which firmware and parts fit.
VEHO hotends and print heads are Tronxy-specific parts.
実績
10月 2022: Tronxy began publishing Marlin source for its STM32F446/GD32-based boards on GitHub (tronxy3d) under GPL-3.0; it updated it until February 2024.
[8][9]
12月 2020: Tronxy launched the XY-3 SE on Kickstarter; the company says shipping finished in April 2021.
[2]
中国
Klipper (Moonraker) 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
