Modix (Modix Modular Technologies Ltd.) is an Israeli maker of large-format FFF printers, from the 600 mm BIG-60 to the two-metre-tall Everest, plus the MAMA pellet printers. It began with desktop printers in 2015 and moved to large format in 2017; its customers are engineering, production and prototyping teams in automotive, aerospace, education and similar fields.
本社:
Israel ·
所有関係:
Modix Modular Technologies Ltd. ·
ウェブサイト:www.modix3d.com
Open: open-source Duet firmware, fully offline operation, any filament and any slicer, and upgrade paths for older machines. Only the print heads and some documentation are Modix's own.
ファームウェアとカスタムファームウェア ●●●●●
Modix printers run open-source RepRapFirmware on an off-the-shelf Duet 3 board, which Modix says owners can replace; its Duet configuration and macro files are on GitHub, and upstream Klipper also has a BIG-60 config.
[3][7][8]
ローカル制御と連携 ●●●●●
Modix states its printers run fully offline with no cloud account or internet connection, controlled through Duet Web Control from any browser on the network; Ethernet is standard and Wi-Fi is a removable dongle. RepRapFirmware's HTTP interface is documented, with OpenAPI files, and Duet3D says third-party applications may use it.
[3][9]
サードパーティー製フィラメント、スライサー、部品 ●●●●●
Any 1.75 mm filament and any slicer that exports G-code, with tested PrusaSlicer and Cura profiles. The Griffin print heads are Modix's own design.
[3][1]
修理と交換部品 ●●●●●
Modix sells spare print-head, electronics and motion parts and maintenance kits, and ships each new generation as upgrades for machines already in use (GEN5 parts fit earlier Modix printers).
[5][1][4]
データとプライバシー ●●●●●
No account, cloud or internet connection is needed to run the printers, and Modix offers air-gapped and closed access-point setups for restricted sites; data stays on your network.
[3][1]
コミュニティとドキュメント ●●●●●
Configuration files on GitHub and a public specs and news site, but slicer profiles are distributed through a Customer Zone and the user base is small and professional.
[7][3]
メリット
Runs fully offline on open-source RepRapFirmware, with no account needed.
Very large build volumes; the BIG-60 starts at 5,700 USD.
New generations are offered as upgrades for printers already owned.
Any 1.75 mm filament, and a pellet option on the MAMA line.
デメリット
The V4-generation models in our catalogue are no longer sold; current machines are GEN5.
Slicer profiles come through a Customer Zone rather than publicly.
Small, professional user community.
Print heads (Griffin) are Modix's own design.
実績
9月 2026: Modix launched Generation 5, a Duet 3 platform with CAN-bus print-head electronics, Ethernet as standard and removable Wi-Fi, offered both on new printers and as an upgrade for machines already in the field.
[4][1]
9月 2025: Modix began delivering the MAMA-1700 pellet printer, announced in June 2024.
[4]
11月 2022: Modix announced Generation 4 of its BIG line, with IDEX dual extruders and automated calibration.
[4]
イスラエル
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
