The TAZ 8 Long Bed is the TAZ 8 with a plate stretched to 295 x 582 mm, for long parts. It is for businesses and labs that print long prototypes, jigs or batches of parts on one plate.
Marlin with 'USB Serial' listed as a connectivity option on the maker's spec table; like the TAZ Workhorse. No OctoPrint report for this model found.
ソース
注意：Simplify3D、ideaMaker、SuperSlicer、KISSlicerなどのスライサーはクラウドに含まれていないため、そのプロファイルは管理していません。LulzBot TAZ 8 Long Bedで正常に動作する場合もあります。プロファイルについては、スライサーのドキュメントやフォーラムを確認してください。GitHubのオープンソースのスライサープロファイルデータベースにプロファイルを提供することもできます。
LulzBot TAZ 8 Long Bed用アプリ
LulzBotはLulzBot TAZ 8 Long Bed用のアプリを提供していません。SimplyPrintをアプリとしてスマートフォンやブラウザーで使用でき、クラウドスライサーも利用できます。
Choose the Long Bed when your parts are long, or you want to fit many parts in one run, and you accept an open-frame bedslinger. It shares the TAZ 8's 290 °C hotend, BLTouch levelling, swappable tool heads and OctoPrint connection to SimplyPrint, and only the plate differs. We found no independent review of this variant. If your parts fit on 295 x 295 mm, the regular TAZ 8 is the simpler pick; for tall rather than long parts, the TAZ 8 XT.
メリット
295 x 582 mm plate, roughly twice the length of the standard TAZ 8 (our facts).
Same engineering-material range as the TAZ 8: nylon, PC, TPU, ABS, PETG and PLA at up to 290 °C (LulzBot TAZ 8 page).
Tool-free swapping of tool heads, and BLTouch automatic levelling with X-axis tramming (LulzBot TAZ 8 page).
Works with SimplyPrint through OctoPrint.
デメリット
Open frame with no enclosure, so hot parts are exposed and warping on long ABS or nylon prints is likely.
A large bed that is also long and heavy to move, which slows down fast prints on a bedslinger.
No built-in camera, and files go in by USB serial or SD card, so remote monitoring needs OctoPrint and a camera you add.
No independent review of this variant was found.
おすすめの対象
学校適していない
A big open-frame machine with an exposed moving bed takes up a lot of room and is not classroom-safe.
ホビーユーザー動作する場合あり
Unusually long prints are possible, but the price and open frame are hard to justify for hobby use.
企業適しています
Useful for long prototypes and fixtures in engineering materials, with the TAZ line's open documentation.
プリントファーム動作する場合あり
SimplyPrint can manage it through OctoPrint, but it is a large, costly machine with no built-in camera.
LulzBot TAZ 8 Long Bedのメーカーと、LulzBotのプリンターの自由度を紹介します。メーカーのクラウドなしで使えるか、フィラメントやスライサーを自由に選べるか、修理できるかを確認できます。各項目は公開情報に基づいて評価しています。
オープン性：開く（5点中5.0点）
開く
閉鎖的なエコシステム開く
LulzBot is an American maker of open-source hardware 3D printers. The brand, which dates itself to 2011, was built up by Aleph Objects of Loveland, Colorado; after near-closure in 2019 it was bought by FAME 3D, which runs it from Fargo, North Dakota. LulzBot publishes its printer CAD, firmware and Cura LulzBot Edition slicer, and sells the TAZ and Mini printers to schools, labs and businesses that want a machine they can repair for years.
設立:
2011 ·
本社:
Fargo, North Dakota, US ·
所有関係:
FAME 3D, LLC (Fargo Additive Manufacturing Equipment 3D), privately held, since November 2019 ·
ウェブサイト:lulzbot.com
Open-source hardware and firmware, published CAD, a deep parts catalogue and no cloud. The cost is a higher price than mass-market printers.
ファームウェアとカスタムファームウェア ●●●●●
LulzBot publishes its Klipper, Moonraker, Mainsail and Marlin forks under the GPL-3.0 on GitHub, updated through 2026, and the Mini 3 runs Klipper. The Free Software Foundation lists the LulzBot Mini and TAZ 6 as Respects Your Freedom certified.
[7][2][13]
ローカル制御と連携 ●●●●●
The Mini 3 runs Klipper with Mainsail in any browser and prints over Wi-Fi or from a USB drive. LulzBot maintains its own Moonraker and Mainsail forks on GitHub, Moonraker's API is documented, and LulzBot offers no printer cloud or account.
[2][18][19]
サードパーティー製フィラメント、スライサー、部品 ●●●●●
Tool heads for 1.75 and 2.85 mm filament, any filament brand, the open-source Cura LulzBot Edition (LGPL/AGPL on GitHub) and OrcaSlicer profiles for older models. Tool heads are LulzBot designs, but their sources are published too.
[3][8][17][9]
修理と交換部品 ●●●●●
LulzBot's shop lists about 155 spare parts, including parts for the TAZ 6 and Mini 1, and the CAD for the TAZ 8 and Mini 3 (GPL-3.0) is published on GitLab.
[5][10][11]
データとプライバシー ●●●●●
No account is needed to print. LulzBot's privacy notice covers only its website and says personal data is not sold or rented.
[4]
コミュニティとドキュメント ●●●●●
An official forum with posts every week, public GitHub and GitLab repositories and published assembly and support documents; the community is active but small.
[12][7][9]
メリット
Open-source hardware and firmware, with CAD files published.
Spare parts still sold for printers from 2016 and earlier.
Runs locally (Klipper and Mainsail on the Mini 3), with no cloud account.
Made in the USA, with its own open-source Cura LulzBot Edition slicer.
デメリット
Expensive: the TAZ 8 listed at $5,395 and the Mini 3 at $1,695 in October 2026.
The company nearly closed in 2019, laying off about 80% of staff before FAME 3D bought it.
Current models are not in OrcaSlicer's built-in list; the main slicer is LulzBot's own Cura edition.
実績
3月 2025: LulzBot introduced the TAZ 8, a large printer with swappable Galaxy Series tool heads.
[3]
7月 2024: LulzBot introduced the Mini 3, running Klipper with the Mainsail web interface and Wi-Fi; its CAD is published on GitLab under the GPL-3.0.
[2][11]
11月 2019: Aleph Objects sold its assets, including the LulzBot brand, to Fargo Additive Manufacturing Equipment 3D (FAME 3D) of Fargo, North Dakota.
[15]
10月 2019: Aleph Objects laid off about 80% of its workforce in a cash-flow crunch while looking for new owners; it said it would keep making and servicing LulzBot printers and honour all warranties.
[14]
米国
OctoPrint 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
