注意：Simplify3D、ideaMaker、SuperSlicer、KISSlicerなどのスライサーはクラウドに含まれていないため、そのプロファイルは管理していません。FLSUN Super Racerで正常に動作する場合もあります。プロファイルについては、スライサーのドキュメントやフォーラムを確認してください。GitHubのオープンソースのスライサープロファイルデータベースにプロファイルを提供することもできます。
FLSUN Super Racer用アプリ
SimplyPrintはFLSUN Super Racerのアプリとして、スマートフォンやあらゆるブラウザーで使えます。クラウドスライサーも利用できます。
The review page (archived copy; the article body did not load) carries a 3 out of 5 rating in its page data and describes a large delta printer with a serious turn of pace. Date is the page's 'Updated' date: its structured date, 2019-10-28, predates the printer.
Aurora Tech · 2022年5月2日
Assembly, then test prints at 150 mm/s in Cura (calibration cube, Benchy, fan duct upgrade, larger models), ending with pros and cons. Conclusion not summarised here.
Teaching Tech · 2021年8月13日
Tests a delta that claims 150 mm/s default speed. Calls it not perfect but right on most things out of the box, printing a speed Benchy in under 20 minutes and acceptable ones in 40.
ModBot · 2021年5月15日
Covers the specs, assembly, print quality and final thoughts on the sub-$500 delta; the title calls it a beast. Conclusion not summarised in detail here.
FLSUN Super Racerのメーカーと、FLSUNのプリンターの自由度を紹介します。メーカーのクラウドなしで使えるか、フィラメントやスライサーを自由に選べるか、修理できるかを確認できます。各項目は公開情報に基づいて評価しています。
オープン性：ほぼオープン（5点中4.2点）
ほぼオープン
閉鎖的なエコシステム開く
FLSUN is the printer brand of Zhengzhou Chaokuo Electronic Technology, a Chinese company founded in 2015. Since 2017 it has made only delta printers, built for speed: the open-frame T1 series, the enclosed S1 and the large V400 Max all run Klipper. They suit people who print tall parts or want fast prints and are willing to tune a delta.
設立:
2015 ·
本社:
Zhengzhou, Henan, China ·
所有関係:
Brand of Zhengzhou Chaokuo Electronic Technology Co., Ltd., privately held ·
ウェブサイト:flsun3d.com
Fairly free to use as you like: Klipper with a local web interface, OrcaSlicer support and a deep spare-parts catalogue. The firmware source came late, as one-time uploads.
ファームウェアとカスタムファームウェア ●●●●●
The S and T series run Klipper, which Tom's Hardware found close to stock on the S1. FLSUN uploaded the Klipper and Moonraker code for the S1, S1 Pro, T1, T1 Pro, T1 Max and T1E to GitHub in August 2025, more than a year after the S1 shipped, as one-time uploads rather than maintained repositories.
[3][4][9]
ローカル制御と連携 ●●●●●
The S1 and T1 series run Klipper with a stock Mainsail interface on the local network, with no account; FLSUN put the printers' Klipper and Moonraker code on GitHub in 2025, and other software can use Moonraker's documented API. FLSUN's app and web platform add remote control and fleet management.
[9][10][4][11][15]
サードパーティー製フィラメント、スライサー、部品 ●●●●●
Any filament works, and OrcaSlicer ships profiles for the S1, T1 and V400 next to FLSUN's own OrcaSlicer-based slicer (published under the AGPL). The S1 takes a standard removable V6-type nozzle, but effectors and hotend kits are FLSUN delta parts.
[14][6][9]
修理と交換部品 ●●●●●
FLSUN's US shop lists over 100 spare parts for the S, T and V400 series, down to motherboards, effectors, parallel arms, screens, motors and belts. We found no published CAD for the current printers.
[12]
データとプライバシー ●●●●●
Printing over Klipper needs no account. FLSUN's app does, and its privacy policy describes collecting device data, location signals and usage, without saying where the data is stored.
[13]
SimplyPrintからFLSUNを実際に使用した経験に基づいています。評価には含まれません。
When an FLSUN owner had a problem with SimplyPrint, one of FLSUN's developers spent over an hour in our live chat with our developers, working it out together.
メリット
Fast delta printers that suit tall parts.
Klipper with a Mainsail web interface on your own network, no account needed.
Large spare-parts catalogue, down to boards, arms and effectors.
OrcaSlicer has FLSUN profiles, so you are not tied to FLSUN's slicer.
デメリット
Firmware source arrived late and as one-time uploads, not maintained repositories.
Reviewers found the S1 needed slicer tuning for accurate prints and measured the T1 Pro louder than advertised.
Tom's Hardware did not recommend the S1 for beginners.
The privacy policy does not say where app data is stored.
実績
8月 2025: FLSUN published the Klipper and Moonraker code for the S1, S1 Pro, T1, T1 Pro, T1 Max and T1E as separate GitHub repositories, uploaded between 8 and 21 August 2025.
[4][5]
5月 2024: FLSUN published the source of FlsunSlicer, its OrcaSlicer-based slicer, on GitHub under the AGPL-3.0.
[6]
10月 2022: FLSUN published the Klipper and Moonraker builds for the V400's Speeder Pad on GitHub under the GPL-3.0.
[7][8]
3月 2021: FLSUN launched the Super Racer (SR), the delta that it says first brought it wide attention.
[1]
2017: FLSUN says it dropped over 90% of its product lines to build only delta printers, and that its revenue fell by 80% as a result.
[1]
中国
OctoPrint 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Kiri:Moto
米国に最適：FLSUNの米国向けストア
EU向けFLSUN