Flashforge Finder 2 3DプリンターはSimplyPrint、OctoPrint、Mainsail、Fluiddに対応していますか？
各接続方法の概要、必要なもの、設定方法です。
免責事項: According to the "OctoPrint-Flashforge" GitHub repository, which holds information about most Flashforge printers, and their compatibility with OctoPrint, and thereby SimplyPrint, this printer is supported. Learn more here: https://github.com/Mrnt/OctoPrint-FlashForge?tab=readme-ov-file#printer-compatibility
It's noted that there may be issues with FlashForge Finder II, Guider II, Guider IIs - these printers do not support relative positioning so when you create your Printer Profile in OctoPrint you will need to go to the "Axes" tab and select "G91 Not Supported". If you still experience issues when using the controls please report with debug log files (see below for how to enable debugging).
注意：Simplify3D、ideaMaker、SuperSlicer、KISSlicerなどのスライサーはクラウドに含まれていないため、そのプロファイルは管理していません。Flashforge Finder 2で正常に動作する場合もあります。プロファイルについては、スライサーのドキュメントやフォーラムを確認してください。GitHubのオープンソースのスライサープロファイルデータベースにプロファイルを提供することもできます。
Flashforge Finder 2用アプリ
SimplyPrintはFlashforge Finder 2のアプリとして、スマートフォンやあらゆるブラウザーで使えます。クラウドスライサーも利用できます。
Flashforge Finder 2のメーカーと、Flashforgeのプリンターの自由度を紹介します。メーカーのクラウドなしで使えるか、フィラメントやスライサーを自由に選べるか、修理できるかを確認できます。各項目は公開情報に基づいて評価しています。
オープン性：混在（5点中3.0点）
混在
閉鎖的なエコシステム開く
Flashforge (Zhejiang Flashforge 3D Technology) is a Chinese 3D printer maker founded in 2011. It sells the Adventurer 5M and 5M Pro CoreXY printers, the AD5X multi-colour printer and the Creator series, plus resin and wax printers, to customers ranging from hobbyists to businesses.
設立:
2011 ·
本社:
Zhejiang, China ·
所有関係:
Zhejiang Flashforge 3D Technology Co., Ltd. ·
ウェブサイト:www.flashforge.com
Flashforge is mixed: the Adventurer 5M runs Klipper with published source and works in a LAN mode with open slicers, but the stock system is closed to modification and its app relies on the cloud.
ファームウェアとカスタムファームウェア ●●●●●
The Adventurer 5M series runs Klipper, and Flashforge published its Klipper source on GitHub under GPL-3.0 in January 2024. The stock system is not built to be modified: the community 'Klipper Mod', which adds Moonraker, Mainsail and Fluidd, is unofficial and warns that it may cost the warranty.
[1][2]
ローカル制御と連携 ●●●●●
A LAN mode lets Orca-Flashforge send jobs on the local network, and USB printing works offline. The Flash Maker app needs internet and a Flashforge account and does not connect in LAN mode. Flashforge documents no local API for other software. Moonraker with Mainsail or Fluidd comes only with the community Klipper Mod, which is unofficial and warns that it may cost the warranty.
[3][4][2]
サードパーティー製フィラメント、スライサー、部品 ●●●●●
Third-party filament works; Orca-Flashforge is an open-source OrcaSlicer fork and OrcaSlicer itself supports Flashforge printers. Nozzles are sold as complete printer-specific assemblies.
[5][6][7]
修理と交換部品 ●●●●●
Flashforge sells nozzle, extruder, filament-feeding and touchscreen assemblies for the Adventurer 5M, and its wiki has replacement guides, for example the AD5X extruder board.
[7][8]
コミュニティとドキュメント ●●●●●
A wiki with manuals, FAQs and maintenance guides, and slicer and Klipper sources on GitHub; much of the advanced use comes from the community mod.
[3][1][2]
メリット
Long-established maker, founded in 2011.
LAN mode and USB printing work without the cloud.
Klipper source and an open-source slicer are published.
Common replacement assemblies are sold for the Adventurer 5M.
デメリット
Stock firmware is not meant to be modified; deeper control needs an unofficial community mod.
The Flash Maker app needs internet and an account, and does not work in LAN mode.
Nozzles are sold as complete printer-specific assemblies.
実績
1月 2024: Flashforge published the Klipper source for the Adventurer 5M and 5M Pro on GitHub under GPL-3.0.
[1]
中国
OctoPrint 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
