खुलापन: खोलें (5 में से 4.3)
बंद पारिस्थितिकी तंत्रखोलें

Tronxy (Shenzhen Tronxy Technology Co., Ltd) is a Shenzhen 3D printer maker whose founder built the company's first printer in 2013. It sells low- and mid-priced FDM printers, from the X5SA and XY-3 series up to the very large VEHO line (1,000 mm and more), plus Moore clay printers, through its own store, Amazon, eBay, AliExpress, Alibaba and dealers. Buyers are hobbyists, schools and small businesses that want a large build volume for little money.

मुख्यालय: Shenzhen, China · वेबसाइट: www.tronxy.com

Mostly open: Marlin source on GitHub, Klipper on the newer large printers, open filament and no cloud. Documentation is thin, and firmware downloads go through an email request.

फर्मवेयर और कस्टम फर्मवेयर
●●●●●		 Tronxy publishes Marlin source for its STM32/GD32 boards on GitHub (tronxy3d) under GPL-3.0, covering nearly 30 X5SA, XY, D01 and VEHO 500-800 variants, last updated February 2024. Its newer VEHO PRO and A series ship with Klipper, and it sells a Klipper upgrade kit for the X5SA. [8][9][6][7]
स्थानीय नियंत्रण और एकीकरण
●●●●●		 We found no Tronxy cloud service or account. The Klipper VEHO PRO prints from a USB flash drive or over a USB data cable, Wi-Fi or Ethernet, all on your own premises, and Tronxy publishes the Marlin source for its X5SA and XY printers, which host software such as OctoPrint drives over USB. [7][9][11]
तृतीय-पक्ष filament, slicer और पार्ट
●●●●●		 Open filament (1.75 mm, with 2.85 mm print heads for the VEHO) and standard G-code, which any slicer produces. VEHO hotends and print heads such as the Ext06 are Tronxy's own parts. [6][7]
मरम्मत और स्पेयर पार्ट्स
●●●●●		 Tronxy's store sells model-specific mainboards, hotends, nozzles and extruder kits for current and older lines (X5SA, XY, VEHO), including Klipper-version parts. [6]
समुदाय और दस्तावेज़
●●●●●		 Firmware source and build steps are on GitHub, and upstream Klipper ships configs for eight Tronxy models. Tronxy's own download page asks owners to email for the right firmware instead of offering it directly. [4][8][10]
फायदे
  • Very large build volumes for the price, up to 1,000 mm and more in the VEHO line.
  • Marlin source is public on GitHub, and the newer VEHO models run open-source Klipper.
  • No cloud or account: print over USB, memory card, Wi-Fi or Ethernet.
  • Spare mainboards, hotends and nozzles sold for current and older models.
कमियां
  • Firmware on Tronxy's website is by email request rather than a direct download.
  • Dozens of models and variants with similar names (the published firmware alone covers nearly 30), so check carefully which firmware and parts fit.
  • VEHO hotends and print heads are Tronxy-specific parts.
सिद्ध अनुभव
  • अक्टूबर 2022: Tronxy began publishing Marlin source for its STM32F446/GD32-based boards on GitHub (tronxy3d) under GPL-3.0; it updated it until February 2024. [8][9]
  • दिसम्बर 2020: Tronxy launched the XY-3 SE on Kickstarter; the company says shipping finished in April 2021. [2]
11 स्रोतों से शोधित, अंतिम बार 18 अक्टूबर 2026 को जाँचा गया। स्रोत दिखाएं
  1. TRONXY is FDM 3D Printer & Filament Manufacturers - TRONXY tronxy.com
  2. Founder Story - TRONXY tronxy.com
  3. FDM 3D Printer - TRONXY tronxy.com
  4. Marlin Firmware Download for Tronxy 3D Printer tronxy.com
  5. About us - Tronxy store store.tronxy.com
  6. Accessories - Tronxy store store.tronxy.com
  7. VEHO 800 PRO/VEHO 1000 PRO Klipper 3D Printer - Tronxy store.tronxy.com
  8. tronxy3d / F4xx-SIM480x320 (GitHub) github.com
  9. tronxy3d (GitHub) github.com
  10. Klipper: printer-tronxy-x5sa-pro-2020.cfg github.com
  11. docs.octoprint.org