The CORE One L+ INDX is Prusa's large enclosed CoreXY with a Bondtech INDX toolchanger: up to eight tools, a 298 x 275 x 330 mm volume, a 60 °C chamber and a 300 °C hotend. It is for makers and businesses who want multi-colour and multi-material parts without the purge waste of a single-nozzle system.
这台Prusa CORE One L+ INDX 3D打印机是否兼容SimplyPrint、OctoPrint、Mainsail和Fluidd？
每种连接方式、所需条件及设置方法。
SimplyPrint客户端
预计可用
PrusaLink is built into Prusa's Buddy firmware, which the SimplyPrint Client connects to, as on the CORE One+ INDX. How the Client handles up to eight tools isn't confirmed yet.
来源
The CORE One+ INDX runs the same firmware family and is expected to print over USB from OctoPrint. Prusa doesn't document tool changes over USB yet.
来源
Runs Prusa's Buddy firmware on xBuddy electronics like the CORE One+ INDX, which SimplyPrint's Prusa firmware (beta) supports. Not confirmed on this printer yet.
来源
注意：其他切片软件，例如Simplify3D、ideaMaker、SuperSlicer和KISSlicer，不在我们的云端，因此我们不会跟踪其配置文件。它们仍可能与您的Prusa CORE One L+ INDX良好配合：请查看切片软件自身的文档或论坛以获取配置文件。您也可以向我们的GitHub开源切片软件配置文件数据库贡献配置文件。
适用于Prusa CORE One L+ INDX的应用
将SimplyPrint作为您Prusa CORE One L+ INDX的应用：您可通过手机或任意浏览器监控和操作它，在云端切片，并将其与其他打印机一起管理。免费即可开始使用。 Prusa自有的应用为Prusa app和Prusa Connect。
Choose the INDX when you want multi-material on a large enclosed machine: Prusa says a tool change takes about 12 seconds and wastes about 0.013 g, and each tool keeps its own nozzle, so TPU and rigid filaments can mix. It is new, ships only assembled, and Prusa's page listed it at €2,779 with estimated delivery after 18 January 2027. The independent reviews Prusa shows are of the CORE One L, not the INDX. If you print one material, the CORE One L+ costs less; for an even larger plate with five toolheads, look at the XL+.
优点
Up to eight tools, each with its own nozzle, so colour changes waste almost no filament: Prusa says about 0.013 g per change (Prusa).
Tool changes in about 12 seconds, against about 42 for single-nozzle systems, with automatic tool-offset calibration (Prusa).
An enclosed 60 °C chamber and a 300 °C hotend for ASA, PC and nylon (Prusa).
Works with any 1.75 mm filament, and a 1080p camera comes in the box (Prusa).
Expected to work with SimplyPrint through the SimplyPrint Client, OctoPrint or Prusa Direct (not yet confirmed).
缺点
Listed at €2,779 (€2,223.20 without VAT) for the 8-tool printer, with delivery estimated after 18 January 2027 (Prusa).
No independent review of the INDX yet: the reviews on Prusa's page are of the CORE One L.
The dock reduces the build volume to 298 x 275 x 330 mm from the L+'s 300 x 300 x 330 mm (Prusa).
Sold fully assembled only, with no kit, and SimplyPrint compatibility is expected rather than confirmed.
适合谁
学校可用
Enclosed and easy to run, and SimplyPrint can queue student prints for approval, but eight tools and the price are more than a classroom needs.
业余爱好者适合
Low-waste multi-colour on a large enclosed machine, at a premium price.
企业适合
Multi-material functional parts with TPU and rigid filaments mixed, though it is new and untested by independent reviewers.
打印农场可用
Low waste per colour print, but it is new, has no plate-clearing kit in our sources and its SimplyPrint connection is not confirmed.
谁制造了Prusa CORE One L+ INDX，以及Prusa的开放程度：其打印机能否在不使用其云服务的情况下运行，是否支持任意耗材和切片软件，以及能否维修。各项均根据公开来源评分。
开放性：打开（5分制4.9分）
打开
封闭生态系统打开
Prusa Research is a Prague company founded in 2012 by Josef Průša, who came from the open-source RepRap project. It designs and builds the Original Prusa and Prusa CORE printers, makes Prusament filament, develops the PrusaSlicer slicer and runs the Printables model site. Printers are built in Prague and at its US site in Delaware, sold assembled or as kits, and used by hobbyists, schools, businesses and print farms.
成立:
2012 ·
总部:
Prague, Czech Republic ·
所有权:
Prusa Research a.s., founded and led by Josef Průša ·
人员:
More than 1,200 people (company site, 2026) ·
网站:www.prusa3d.com
Prusa is the most open of the large brands: GPL firmware, an open slicer, full local control without an account and spare parts for everything. Hardware design files now come under Prusa's own Open Community License, which allows personal and in-house business use but not selling machines.
固件和自定义固件 ●●●●●
Firmware for current printers is published on GitHub under GPL-3.0 and updated with every release. Official firmware is signed, but Prusa documents how to flash custom firmware by breaking a seal on the board and says this does not void the warranty. Prusa says firmware and printable parts are shared right away and electronics schematics later.
[1][2][3]
本地控制与集成 ●●●●●
PrusaLink, built into the CORE One, MK4S, MK3.9, MK3.5 and XL, handles monitoring, file uploads and print control on the local network without internet or an account, and printing from USB works offline. Prusa publishes PrusaLink's HTTP API as an OpenAPI specification on GitHub, and its help centre covers OctoPrint setup. Prusa Connect is an optional cloud service for remote access.
[4][15]
第三方耗材、切片软件和零件 ●●●●●
Printers are open to any filament; PrusaSlicer is GPL-licensed and other slicers work. Instead of a locked RFID system, Prusa created OpenPrintTag, an NFC spool-tag standard that is free for any brand to use and works offline.
[5][6]
维修和备件 ●●●●●
The e-shop sells spare parts for each printer, printable parts are published, and the full CORE One CAD files are released. Prusa's open-source page says its goal is printers that stay moddable and easy to repair for decades, and its licence explicitly allows making spare parts for your own machines.
[7][3][5]
数据与隐私 ●●●●●
No account is needed for local use through PrusaLink or USB. Prusa Connect needs a Prusa account and stores G-codes and telemetry in the cloud. Prusa Research is an EU company and publishes its privacy policy and a Trust Center.
[4][8]
社区和文档 ●●●●●
Large community around Printables and the forum, a detailed knowledge base, and firmware and slicer developed in public on GitHub with open issue trackers.
[1][4]
优点
GPL firmware with a documented, warranty-safe way to flash custom firmware.
Full control on the local network through PrusaLink, with no account needed.
Spare parts for every printer, published printable parts and released CAD files.
Kits available for people who want to build and understand their printer.
Made in Prague, with a second factory in Delaware for US buyers.
OpenPrintTag is an open spool-tag standard any brand can use.
缺点
Hardware files use Prusa's own OCL licence, which bars selling machines built from them; it is not an OSI open-source licence.
Electronics schematics are published later than firmware and printable parts.
Remote access and cloud storage need Prusa Connect and an account.
实绩
七月 2026: Printed Solid, the Delaware company Prusa Research bought in 2022, was renamed Prusa USA. Its Wilmington site builds the MK4S and CORE One+, makes filament and is Prusa's US service centre.
[9]
十二月 2025: Prusa released the full CAD files of the CORE One under its new Open Community License (OCL). OCL allows modifying, sharing mods and in-house commercial use, and grants patent and repair rights, but bars selling machines built from the files without an agreement, so it is not a standard open-source licence. Prusa said it is also filing patents on its designs.
[5]
十月 2025: Prusa launched OpenPrintTag, a published NFC standard for smart filament spools that any brand can use without licence fees, starting with redesigned Prusament spools.
[6]
十一月 2024: Prusa announced the CORE One, its first fully enclosed CoreXY printer with active chamber temperature control.
[10]
三月 2023: Josef Průša wrote that open source in 3D printing was under strain from cloners and licence violations. With the MK4, Prusa released firmware sources and models of the plastic parts but held back the electronics plans, planning to publish them later under a new licence.
[11]
捷克
SimplyPrint客户端 
OctoPrint 
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
